KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/kmitl/1

Browse

Settings

Access type: UnknownSubject: search.filters.subject.Cement

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Towards sustainable construction: Harnessing potential of pumice powder for eco-friendly concrete, augmented by hybrid fiber integration to elevate concrete performance
    (2024-12-01)
    Farooq, Umar
    ;
    Rizwan, Muhammad
    ;
    Khaliq, Wasim
    ;
    Ejaz, Ali
    ;
    Saingam, Panumas
    This study investigates the innovative use of industrial waste pozzolana, specifically pumice powder (PP), as a partial replacement for cement, combined with hybrid fibers in concrete. Seven formulations varying PP content from 10 % to 35 % were tested, identifying 15 % PP as optimal. PP improved porosity due to its fineness, leading to better homogeneity, a refined microstructure, and an optimum compressive strength of 28.8 MPa with reduced permeability, enhancing durability. Hybrid fibers, including steel fibers (SF) from waste tires and polypropylene fibers (PF), improved toughness, ductility, and resistance to brittle failure. Tests on hybrid fiber-reinforced concrete (HyFRC) mixes with 1 % and 2 % hybrid fibers showed up to an 18.09 % increase in compressive, tensile, and flexural strengths. Energy dissipation in compressive response improved by 544.20 %, while flexural and splitting responses increased by up to 299.65 % and 208.57 %. Durability assessments in hydrochloric (HCl) and sulfuric acid (H<inf>2</inf>SO<inf>4</inf>) exposure revealed the synergy of fibers and PP enhanced resistance to chemical degradation, with high PF mixes losing as little as 0.04 % strength. Scanning electron microscopy (SEM) confirmed a dense, well-bonded matrix with reduced porosity. Analytical characterizations of mixtures such as energy dispersive x-ray spectroscopy (EDX) were studied. Regression models developed using Popovic's and Mander's models, accurately predicted HyFRC stress-strain behavior, closely aligning with experimental results. The integration of PP and hybrid fibers not only improved mechanical properties but also extended service life in harsh environments, offering a cost-effective, sustainable concrete solution.
      1
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    A low-cost method for determination of calcium carbonate in cement by membraneless vaporization with capacitively coupled contactless conductivity detection
    (2010-05-15)
    Sereenonchai, Kamonthip
    ;
    Teerasong, Saowapak
    ;
    Chan-Eam, Sumonmarn
    ;
    Saetear, Phoonthawee
    ;
    Choengchan, Nathawut
    This work presents a flow analysis method for direct quantitation of calcium carbonate in cement without pretreatment of the sample. The method is based on online vaporization of CO<inf>2</inf> gas following acidification of the sample inside a small chamber that has a flow of acceptor solution passing around it. Solubilization of the CO<inf>2</inf> gas into the acceptor stream changes the conductivity of the acceptor solution causing an increase of signal at the capacitively coupled contactless conductivity detection (C<sup>4</sup>D) placed at the outlet of the vaporization chamber. This chamber is an adaption from previous work reported on 'membraneless vaporization' (MBL-VP). The method can be used in the quality control of production of mixed cement. These cement materials usually have calcium carbonate contents at high concentration range (e.g., 33-99% (w/w) CaCO<inf>3</inf>). Analysis of samples by this method is direct and convenient as it requires no sample pretreatment. The method is low-cost with satisfactory accuracy and acceptable precision. © 2010 Elsevier B.V.
      2