KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Access type: UnknownSubject: search.filters.subject.Ethylene-octene copolymer

Search Results

Now showing 1 - 3 of 3
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Morphology and properties of poly(lactic acid)/ethylene-octene copolymer blends with different organoclay types
    (2020-01-01)
    Wacharawichanant, Sirirat
    ;
    Sriwattana, Attachai
    ;
    Yaisoon, Kulaya
    ;
    Phankokkruad, Manop
    This work studied the morphology, mechanical and thermal properties of poly (lactic acid) (PLA)/ethylene-octene copolymer (EOC) (80/20) blends with different organoclay types. Herein, EOC was introduced to toughening PLA by melt blending and organoclay was used to improve compatibility and tensile properties of the blends. The two organoclay types were nanoclay surface modified with aminopropyltriethoxysilane 0.5-5 wt% and octadecylamine 15-35% (Clay-ASO) and nanoclay surface modified with dimethyl dialkyl (C14-C18) amine 35-45 wt% (Clay-DDA). The organoclay contents were 3, 5 and 7 phr. Scanning electron microscope (SEM) observation results revealed PLA/EOC blends demonstrated a two-phase separation of dispersed EOC phase and PLA matrix phase. The addition of organoclay significantly improved the compatibility between PLA and EOC phases due to EOC droplet size decreased dominantly in PLA matrix, so organoclay could act as an effective compatibilizer. The incorporation of organoclay increased significantly tensile strength of PLA/EOC/organoclay composites while Young’s modulus increased with 5 phr of organoclay. The thermal stability of PLA/EOC blends did not change when compared with neat PLA, and when added Clay-ASO in the blends could improve the thermal stability of the PLA/EOC blends.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Improvement of poly(Lactic acid) properties by ethylene-octene copolymer and organoclay
    (2020-01-01)
    Wacharawichanant, Sirirat
    ;
    Hanjai, Paweena
    ;
    Khongaio, Sanya
    ;
    Phankokkruad, Manop
    The work studied the morphological, mechanical and thermal properties of poly(lactic acid) (PLA)/ethylene-octene copolymer (EOC) blends before and after adding the montmorillonite clay surface modified with 25-30% of octadecylamine (clay-ODA). The PLA/EOC blends and composites were prepared by melt mixing in an internal mixer. The EOC contents were 5, 10, 20, 30 wt% and clay-ODA contents were 1 and 3 phr. The morphology analysis showed that the addition of clay-ODA could improve the miscibility of PLA and EOC phases due to the domain size of dispersed EOC phase decreased with increasing clay-ODA content. X-ray diffraction revealed the formation of intercalated/exfoliated structure in PLA/clay-ODA and PLA blend composites. The mechanical properties showed that the impact strength of PLA/EOC blends dramatically increased with increasing EOC content up to 10 wt%. The strain at break of PLA blends increased with increasing EOC content. Moreover, the incorporation of clay-ODA increased significantly Young’s modulus of PLA and PLA/EOC blends with increasing clay-ODA content. The thermal stability of PLA/EOC blends improved with the addition of a small amount of clay-ODA.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Morphology and properties of poly(Lactic acid)/ethylene-octene copolymer nanocomposites
    (2019-01-01)
    Wacharawichanant, Sirirat
    ;
    Sriwattana, Attachai
    ;
    Yaisoon, Kulaya
    ;
    Phankokkruad, Manop
    The effects of the montmorillonite clay surface modified with 0.5-5 wt% aminopropyltriethoxysilane and 15-35% octadecylamine (Clay-APTSO) on morphology, mechanical and thermal properties of poly(lactic acid) (PLA)/ethylene-octene copolymer (EOC)/Clay-APTSO composites were investigated. The blends of PLA/EOC with and without Clay-APTSO were prepared by melt mixing in an internal mixer. Scanning electron microscopy analysis observed the morphology of PLA/EOC blends demonstrated a phase separation of minor phase and matrix phase. The addition of Clay-APTSO in PLA/EOC blends showed significant decreased in droplet size of dispersed EOC phase, thus, Clay-APTSO acted as an effective compatibilizer in the PLA/EOC blends. The results of tensile properties found the decrease of Young’s modulus of PLA when added EOC due to the low modulus and flexibility of EOC. While the incorporation of Clay-APTSO increased significantly Young’s modulus of PLA/EOC blends at low EOC and Clay-APTSO content. The strain at break of the blends increased with the increase of EOC loading, this indicated the presence of EOC enhanced the elongation at break of PLA, while the addition Clay-APTSO reduced the strain at break of PLA/EOC blends. The tensile strength of all blend compositions improved when added Clay-APTSO and the tensile strength showed the highest value at 3 phr of Clay-APTSO. The thermal stability of PLA/EOC blends did not change when compared with neat PLA, and when added Clay-APTSO in the blends could improve the thermal stability of the PLA/EOC blends.