DSpace-CRIS

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
From Experiment to Prediction: Machine Learning Solutions for Concrete Strength Assessment with Steel Clamps
(2026-02-01)
Saingam, Panumas
;
Chatveera, Burachat
;
Sua-Iam, Gritsada
;
Chaimahawan, Preeda
;
Suthumma, Chisanuphong
This study examines the confined compressive strength (Fcc) of circular, square, and rectangular column geometries under varying confinement conditions. Results indicate that circular columns have the highest Fcc values, exceeding those of square and rectangular shapes. Increased confinement through clamps significantly enhances compressive strength. Five machine learning models, Linear Regression, Decision Tree, Random Forest, AdaBoost, and Gradient Boosting, were used to predict Fcc based on geometric and confinement parameters. Linear Regression and Decision Tree models achieved moderate predictive performance, with R2 values of 0.84 and 0.83, respectively, and relatively higher error measures (RMSE, MAE, and MAPE), indicating limited ability to capture complex nonlinear relationships in the data. In contrast, ensemble-based methods demonstrated superior performance. The Random Forest model improved the coefficient of determination to 0.90 while substantially reducing all error metrics, reflecting enhanced generalization through bagging. The boosting-based approaches yielded the best results, with AdaBoost achieving the highest R2 value of 0.99 and the lowest RMSE, MAE, and MAPE among all models, followed closely by Gradient Boosting with an R2 of 0.98. These results confirm that ensemble learning techniques, particularly boosting algorithms, yield more accurate and robust predictions than single learners for the problem studied. Data visualization techniques, including Regression Error Characteristic curves (REC) and SHapley Additive exPlanations (SHAP) value analysis, highlighted model performance and feature importance, emphasizing the roles of confinement and geometry in compressive strength. This research demonstrates the potential of machine learning to optimize structural engineering design and suggests further exploration of alternative shapes and confinement strategies to enhance structural integrity.
Some of the metrics are blocked by your
consent settings
Eco-Friendly Structural Solutions: The Synergy of Waste Rubber and Hemp Fibers in Sustainable Concrete Design
(2026-01-01)
Thansirichaisree, Phromphat
;
Mohamad, Hisham
;
Chaimahawan, Preeda
;
Hussain, Qudeer
;
Jirasakjamroonsri, Amornthep
The growing emphasis on sustainable construction has encouraged the integration of recycled and renewable materials into structural concrete. This study investigates the axial compressive behavior of rectangular columns incorporating waste-tire rubber as a partial replacement of fine aggregate (5% and 10%) and external confinement using low-cost hemp ropes. A total of twelve specimen configurations, including unconfined and hemp-confined columns with up to three wrapping layers, were tested under monotonic axial compression. The results show that rubber inclusion reduces initial stiffness and peak strength by up to 46%, yet significantly enhances deformability. Hemp-rope confinement effectively compensates for strength loss, increasing compressive strength by up to 53% and ultimate strain by over 500%, with more pronounced effects in rubberized mixes. Normalized strength and strain trends demonstrate a strong dependence on confinement ratio, particularly for highly deformable concrete. To generalize these behaviors, Popovics-based models were calibrated using nonlinear regression, yielding high predictive accuracy (R2 = 0.94–0.98) for key parameters including peak stress, peak strain, post-peak modulus, and elastic modulus. The proposed expressions closely reproduce the experimental stress–strain response and provide practical tools for modeling confined conventional and rubberized concrete.
Some of the metrics are blocked by your
consent settings
Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches
(2023-11-01)
Yooprasertchai, Ekkachai
;
Bahrami, Alireza
;
Saingam, Panumas
;
Hussain, Qudeer
;
Ejaz, Ali
Each year, an enormous amount of construction waste is produced worldwide. The reuse of construction waste in construction works is a sustainable solution. The present research work utilized recycled brick aggregates in the production of concrete. The resulting concrete exhibited substandard splitting tensile, flexural, and compressive properties. Steel fibers were used to improve these substandard properties of recycled brick aggregate concrete. The volume fractions of 1%, 2%, and 3% for steel fibers were mixed in concrete, whereas recycled brick aggregates were obtained from solid fired-clay bricks, hollow fired-clay bricks, and cement–clay interlocking bricks. The compressive strength was enhanced by up to 35.53% and 66.67% for natural and recycled brick aggregate concrete, respectively. Strengthened flexural specimens demonstrated up to 8765.69% increase in the energy dissipation. Specimens strengthened with steel fibers showed substantially improved splitting tensile, flexural, and compressive responses. Separate equations were proposed to predict the peak compressive strength, strain at peak compressive strength, elastic modulus, and post-peak modulus of recycled brick aggregate concrete. The proposed regression equations were utilized in combination with an existing compressive stress–strain model. A close agreement was observed between experimental and predicted compressive stress–strain curves of recycled brick aggregate concrete.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results