KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/kmitl/1

Browse

Search Results

Now showing 1 - 10 of 262

Some of the metrics are blocked by your
consent settings
Wideband dual-arm capacitively coupled patch antenna for tablet/laptop applications
(2019-12-01)
Niyamanon, Sorana
;
Janpangngern, Pisit
;
Phongcharoenpanich, Chuwong
The capacitively coupled microstrip antenna for 4G and Wi-Fi applications is presented. The antenna has a compact size which can easily be installed into many types of wireless communication device. The antenna is designed on FR4 substrate with a total dimension of 70 mm × 9 mm × 0.8 mm. The structure of the antenna consists of two main parts. The T-shape feeding patch located between two radiating strips with the ground strip being placed behind them. The surface current distribution and parametric study was analyzed to determine the suitable parameters. Furthermore, the antenna prototype was fabricated and tested. The operating frequency range of the proposed antenna is between 1.7 GHz and 2.5 GHz for the |S11| of less than-10 dB. The antenna provides a linear polarization in a single beam direction covering approximately one quadrant of the free space with a maximum gain of higher than 1.47 dBi on the entire frequency band.
Some of the metrics are blocked by your
consent settings
Wideband UHF Reflector Antenna for DVB Applications
(2019-12-01)
Osklang, Pracha
;
Sakonkanapong, Arnon
;
Dentri, Sitthichai
;
Lertsakwimarn, Kittima
;
Luadang, Bancha
This paper presents the design, measurement, and development of a bow tie wideband antenna using scutcheon shape with inductive-loaded for DVB applications. The antenna consists of 3 elements; a scutcheon bow tie radiator, a line inductive-loaded and a square reflector. The element of bow tie achieves a lower frequency of 470 MHz. The element of line inductive-loaded achieves an upper frequency of 860 MHz for |S11| of less than-10 dB. The measured results of the prototype antenna are good agreement. The impedance bandwidth of 81.27%, which covering a frequency range from 374 MHz to 886 MHz. The measured gains are flat around 7 dBi over the DVB band. The HPBW in the vertical and horizontal planes are 56.8° and 117.3° at frequency of 660 MHz.
Some of the metrics are blocked by your
consent settings
Curved meander line resonators for chipless RFID sensors
(2019-09-01)
Suwalak, Rattapong
;
Phongcharoenpanich, Chuwong
;
Akkaraekthalin, Prayoot
;
Torrungrueng, Danai
This paper presents a chipless RFID sensor based on the curved meander line resonator. The sensor is designed and printed on Fr4-substrate with thickness of 0.8 mm. The resonator on the RFID sensor acts as a data bit for identification, where we use only one bit in this paper for illustration. Transmitting and receiving antennas on the RFID sensor are properly designed to sense the dielectric property of the material under test. From the results, it can operate from 1.8-2.5 GHz. The gain is 2.14 dBi at the resonant frequency of 2.28 GHz. Therefore, it can be candidate as a RFID sensor with a nondestructive testing technique.
2
Some of the metrics are blocked by your
consent settings
Message from organizing chairs
(2019-07-01)
Phongcharoenpanich, Chuwong
Some of the metrics are blocked by your
consent settings
Measurement of Radiated Field from Transmitting Antennas Located in Various Environments
(2019-04-01)
Krairiksh, Monai
;
Kittiyanpunya, Chainarong
;
Limpiti, Thunyawat
;
Tantisopharak, Tanawut
;
Leekul, Prapan
In microcellular communications, the transmitting antennas can be installed at low heights above the ground. However, even for low elevation towers, installation cost is still high. One of the possible ways for the deployment of base station antennas is to install them near the ground in order to do away with the tower. The main purpose of this paper is to suggest installation of the radiating antennas near the ground and tilting their orientation toward the sky - a totally nonintuitive solution. It will be shown that such deployments have the potential of reducing slow fading and can further enhance the signal strength close to the radiating antenna. This paper provides measured data for the received fields to validate the theoretical conjecture of such a deployment in various environments. The measured results are presented for 245, 800, 1000, and 2400 MHz. It is illustrated that such an unorthodox deployment can result in a low cost for the installation of base station antenna as the towers are not necessary. This can be useful in restoring communications in emergency situations where minimum infrastructure exists.
Some of the metrics are blocked by your
consent settings
A compact dual-band circular monopole antenna with partial ground plane for 2.45/5.5 GHz WLAN applications
(2019-03-01)
Lamultree, Suthasinee
;
Jansri, Chalee
;
Phongcharoenpanich, Chuwong
In this paper, a compact dual-band antenna for 2.45/5.5 GHz WLAN applications is presented. Geometry of a presented antenna consists of a circular-slot printed on a circular monopole with a partial ground plane, operated at 2.45 GHz and 5.5 GHz bands, respectively. It is constructed by using FR-4 substrates with ϵ<inf>r</inf> of 43 and 0.035 mm copper layer thickness. This antenna is compact with a size of 70 mm×80 mm×1.6 mm, and it is capable to easily integrate with other circuits. It is shown that this proposed antenna wholly covers the required bandwidths ranging from 2.4-2.485 GHz and 5.15-5.825 GHz with desirable radiation characteristics and magnitude of S<inf>11</inf> better than -10dB. To verify the simulation, an antenna prototype was made up and measured. Obviously, the simulation results are in well acceptance with the measured one.
Some of the metrics are blocked by your
consent settings
Heuristic UTD solution for antennas near a complex platform
(2019-01-01)
Pimpatang, Awika
;
Lertwiriyaprapa, Titipong
;
Phongcharoenpanich, Chuwong
This paper is aimed at developing an approximate and relatively simple but closed-form uniform geometrical theory of diffraction (UTD) solution for describing the radiated and scattered fields by an antenna near a complex platform consisting of a three-dimensional (3-D) thin material-coated metallic surface, including edges and corners. Unlike the previous works that consider primarily plane wave scattering, the developed solution can also treat radiation/scattering problems of antennas near finite material-coated metallic surfaces which are composed of edges and corners. The developed solution, which is formulated by using a heuristic approach, recovers the proper local plane wave Fresnel reflection coefficient. In addition, the developed UTD-diffracted fields will satisfy the radiation condition, boundary conditions on the conductor. The accuracy of the developed solution is verified by comparing with simulation results from a computer software. It is found that the results from our developed solution agree well with those of references. However, some small discrepancies occur but it is good enough for engineering applications. The proposed solution can be very useful for antenna engineers to design multiple antennas with an electrically large complex material-coated platform.
1
Some of the metrics are blocked by your
consent settings
Gain improvement of dual-band circular monopole antenna for 2.45/5.5 GHz WLAN applications
(2019-01-01)
Lamultree, Suthasinee
;
Jansri, Chalee
;
Phongcharoenpanich, Chuwong
This paper presents a gain improvement of dual-band antenna for 2.45/5.5 GHz WLAN applications. The radiating element of the proposed antenna consists of a circular disc monopole with circular-slot laid on FR-4 substrate and backed by a partial ground plane. This partial ground plane is modified to improve its radiation performance. This proposed antenna operates over the frequencies of 2.4-2.485 GHz and 5.15-5.825 GHz with nice radiation characteristics and magnitude of S11 better than -10 dB. An EM simulator has been used in the design and simulation. In addition, an experimental validation was set and measured to compare with the simulated results. All numerical results will be reported and discussed in the paper.
Some of the metrics are blocked by your
consent settings
Design and measurement of a probe-fed open-ended rectangular waveguide with four-stacked-coupling-aperture
(2019-01-01)
Lamultree, Suthasinee
;
Panthasa, Rut
;
Phongcharoenpanich, Chuwong
This paper presents a design and measurement of symmetric bidirectional pattern antenna implemented by using a probe-fed open-ended rectangular waveguide (OERW) vertically attached with four-stacked-coupling-aperture (FSCA). For the OERW without FSCA, it provides asymmetric beam in forwards and backwards directions. With the effect of FSCA, that asymmetry is amended to be symmetry, and propagates the WLAN frequency band of 2.4–2.5 GHz with the return loss better than 10 dB, and maximum gain of 7.04 dBi. A prototype antenna was fabricated and measured. Obviously, the preliminary measured results are very reassuring, and reasonably in good agreement with simulation results.
Some of the metrics are blocked by your
consent settings
Circularly Polarized Omnidirectional Antenna with Dipole Core and Diagonally Adjoined Parasitic Braces for ISM Band Applications
(2019-01-01)
Dangkham, Piyapong
;
Dentri, Sitthichai
;
Phongcharoenpanich, Chuwong
;
Akkaraekthalin, Prayoot
This research proposes a circularly polarized (CP) single-fed omnidirectional dipole antenna operable in 2.45 GHz frequency for the industrial, scientific, and medical (ISM) radio band applications. The proposed antenna consisted of bisectional dipole core, a pair of quarter-wave baluns, and four diagonally adjoined parasitic braces. The bisectional dipole core was utilized to improve the antenna gain and realize omnidirectional radiation pattern, and the quarter-wave baluns were to symmetrize the current on the bisectional core. The four parasitic braces collectively generated circular polarization. In the study, simulations were conducted using CST Microwave Studio and a prototype antenna fabricated. To validate, experiments were carried out, and simulation and experimental results compared. The finding revealed good agreement between the simulation and experimental results. Essentially, in addition to achieving an antenna gain of 2.07 dBic, the proposed CP single-fed omnidirectional antenna is suited to ISM frequency band applications.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results