KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Chaturabul, SresthaSubject: search.filters.subject.Arsenic

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Arsenic removal from natural gas condensate using a pulsed sieve plate column and mass transfer efficiency
    (2012-02-01)
    Chaturabul, Srestha
    ;
    Wannachod, Pharannalak
    ;
    Rojanasiraprapa, Bongkotch
    ;
    Summakasipong, Supat
    ;
    Lothongkum, Anchaleeporn W.
    This work applied a pulsed sieve plate column in conjunction with liquid-liquid extraction technique to remove arsenic from natural gas condensate. The relevant parameters, that is the type and concentration of the extractant, pulse velocity, volumetric-flow rate ratio of the condensate to the extractant, operating time, and extraction cycle were investigated. Mass transfer efficiency in terms of the overall height of transfer unit (HTU <inf>oy</inf>cm) and the interfacial area (m <sup>2</sup>/m <sup>3</sup>) were calculated. The highest percentage of arsenic removal in this study was 94% corresponding to the calculated HTU <inf>oy</inf> of 26 cm and the calculated interfacial area of 118 m <sup>2</sup>/m <sup>3</sup> at the optimum conditions: the mixture of the extractant (1 M hydrochloric acid and 20% (v/v) methanol), pulse velocity of 20 mm/s, and volumetric-flow rate ratio of the condensate to the extractant of 1:4. By using continuous operation in the cycle mode, the percentages of arsenic removal were observed at 94, 85, and 80 from the respective 1st, 2nd, and 3rd cycles. The operation was based on the condition that fresh feed was introduced in each cycle while the extractant was reused. © Taylor and Francis Group, LLC.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Simultaneous removal of arsenic and mercury from natural-gas-co-produced water from the Gulf of Thailand using synergistic extractant via HFSLM
    (2011-03-01)
    Lothongkum, Anchaleeporn Waritswat
    ;
    Suren, Sira
    ;
    Chaturabul, Srestha
    ;
    Thamphiphit, Nopphawat
    ;
    Pancharoen, Ura
    The simultaneous separation of arsenic and mercury ions from natural-gas-co-produced water was well achieved by a synergistic extractant through a hollow fiber supported liquid membrane (HFSLM). Aliquat 336, Bromo-PADAP, Cyanex 923 and Cyanex 471 dissolved in toluene were used as the organic extractants or carriers. The transport system was studied on several variables: types of the extractants, concentration of the synergistic extractant, concentration of H<inf>2</inf>SO<inf>4</inf> (a co-extractant) in feed solution, types of stripping solutions (NaOH, DI water, HNO<inf>3</inf>, H<inf>2</inf>SO<inf>4</inf> and thiourea), and the number of separation cycles. The results indicated the superior performance of mercury removal to arsenic by every single extractant in this study. The synergistic effect on arsenic removal was observed by adding Cyanex 471 in Aliquat 336 resulting in the synergistic coefficient of 2.8. The regulate mercury discharge to the environment not higher than 5ppb was attained within 1-cycle separation by using the mixture of 0.22M Aliquat 336 and 0.06M Cyanex 471 as the synergistic extractant and 0.1M thiourea as the stripping solution with 0.2M H<inf>2</inf>SO<inf>4</inf> in feed solution. By 3-cycle separation, 94% arsenic extraction, which was below the legislation limit of 250ppb, was obtained. © 2010 Elsevier B.V.