KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Jedsadaratanachai, W.Subject: search.filters.subject.Heat transfer

Search Results

Now showing 1 - 3 of 3
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Thermal characteristics in turbulent channel flows with V-baffle vortex generators
    (2014-01-01)
    Kaewkohkiat, Y.
    ;
    Jedsadaratanachai, W.
    ;
    Eiamsa-Ard, P.
    ;
    Promvonge, P.
    ;
    Eiamsa-Ard, S.
    Experimental work has been performed to examine the effects of V-baffle vortex generators on the heat transfer and friction characteristics in a channel under a constant heat flux boundary condition. In the experiments, V-baffles at different pitch ratios (PR=P/e = 4.0, 6.0 and 8.0) were carried out. Measurements were carried out for a channel of one aspect ratio, AR = W/H = 4.0 and duct height, H= 40 mm with baffle height, e = 8 mm. Experiments were conducted for the Reynolds number range of 6000 to 22,000. The distributions of temperature and local Nusselt number on bottom channel wall were observed with thermochromic liquid crystal (TLC) sheet. Isothermal friction factors were also taken and presented. The obtained results demonstrate that heat transfer increases with the increase of Reynolds number, whereas friction factor (f) shows the opposite trend. Experimental results also show that the channels with V-baffle at the highest pitch ratio (PR = 8.0) provide highest heat transfer than others. © 2014 Asian Institute of Technology.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Heat transfer and flowfriction behaviors in a channel with multiple 30° V-ribs
    (2014-01-01)
    Khanoknaiyakarn, C.
    ;
    Jedsadaratanachai, W.
    ;
    Promvonge, P.
    The paper presents an experimental study on heat transfer and flow friction characteristics in a rectangular channel fitted with periodically rectangular V-ribs. The multiple V-rib turbulators are tested in the channel having an aspect ratio (width to height ratio), AR=10 and height, H= 30 mm, with three rib-to-channel height ratios (e/H=0.2, 0.3, and 0.4), two rib-pitch to channel-height ratios (PR=P<inf>1</inf>/H= 3 and 4) and a single attack angle (α=30°). The upper plate of channel is uniformly heated at a constant heat-flux. The experiment has been conducted by varying airflow velocity in order to obtain the Reynolds number range from 5000 to 24,000. The experimental results show a significant effect of the presence of the ribs on the heat transfer rate and pressure drop over the smooth channel. The measured data indicates that the V-rib turbulators with e/H = 0.4 and PR =3 yields the highest heat transfer rate and friction loss. All the V-rib turbulators perform much higher than the smooth channel with no rib. © 2014 Asian Institute of Technology.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Laminar periodic flow and heat transfer in square channel with 30° inclined baffles
    (2010-12-06)
    Kwankaomeng, S.
    ;
    Jedsadaratanachai, W.
    ;
    Promvonge, P.
    A numerical investigation has been carried out to study laminar flow and heat transfer characteristics in a three-dimensional isothermal wall square-channel with 30° staggered angled-baffles. The computations are based on the finite volume method, and the SIMPLE algorithm has been implemented. The fluid flow and heat transfer characteristics are presented for Reynolds numbers based on the hydraulic diameter of the channel ranging from 100 to 1200. To generate a pair of stream wise counter-rotating vortex (P-vortex) flows through the tested channel, the baffles (like rectangular winglet) with the attack angle of 30° are mounted in tandem and staggered arrangement on both upper and lower walls of the test channel. Effects of different baffle heights at a single pitch ratio (PR=3) on heat transfer and pressure loss in the channel are studied. It is found that P-vortex flows created by the 30° baffle exist and help to induce impinging jets on a side wall and the upper and lower wall leading to drastic increase in heat transfer rate over the test channel. In addition, the increase in the baffle height results in the rise of Nusselt number and friction factor values. The computational results reveal that the optimum thermal enhancement factor of the baffle is about 2.9 at height of 0.15 times of the channel height.