KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Kaewkohkiat, Y.Subject: search.filters.subject.Channel

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Thermal characteristics in turbulent channel flows with V-baffle vortex generators
    (2014-01-01)
    Kaewkohkiat, Y.
    ;
    Jedsadaratanachai, W.
    ;
    Eiamsa-Ard, P.
    ;
    Promvonge, P.
    ;
    Eiamsa-Ard, S.
    Experimental work has been performed to examine the effects of V-baffle vortex generators on the heat transfer and friction characteristics in a channel under a constant heat flux boundary condition. In the experiments, V-baffles at different pitch ratios (PR=P/e = 4.0, 6.0 and 8.0) were carried out. Measurements were carried out for a channel of one aspect ratio, AR = W/H = 4.0 and duct height, H= 40 mm with baffle height, e = 8 mm. Experiments were conducted for the Reynolds number range of 6000 to 22,000. The distributions of temperature and local Nusselt number on bottom channel wall were observed with thermochromic liquid crystal (TLC) sheet. Isothermal friction factors were also taken and presented. The obtained results demonstrate that heat transfer increases with the increase of Reynolds number, whereas friction factor (f) shows the opposite trend. Experimental results also show that the channels with V-baffle at the highest pitch ratio (PR = 8.0) provide highest heat transfer than others. © 2014 Asian Institute of Technology.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Heat transfer enhancement in a channel with rib-groove turbulators
    (2010-04-01)
    Kaewkohkiat, Y.
    ;
    Kongkaitpaiboon, V.
    ;
    Eiamsa-Ard, S.
    ;
    Pimsarn, M.
    This paper presents the effects of the rib-groove turbulators on the heat transfer and friction characteristics in a rectangular channel. The experiments encompass the Reynolds number range from 1800 to 10,000; pitch ratios (PR=P/e) 6.6-13.3 by using air as the working fluid. The obtained results demonstrate that heat transfer rate in term of Nusselt number (Nu) increases with the increase of Reynolds number, whereas friction factor (f) shows the opposite trend. Both Nusselt number and friction factor increase with decreasing pitch ratio. It is also observed that heat transfer rate and friction factor for the channels with rib-groove turbulators are higher than those for the smooth channel under similar test conditions. In addition, the correlations for heat transfer rate in term of Nusselt number (Nu) and friction factor (f) for channel with rib-groove turbulators are also presented. © 2010 American Institute of Physics.