DSpace-CRIS

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
Enhanced thermal effectiveness of square duct with V-type double-baffles: Numerical study
(2024-09-01)
Promvonge, Pongjet
;
Sripattanapipat, Somchai
;
Thianpong, Chinaruk
;
Skullong, Sompol
;
Promthaisong, Pitak
The article puts forward three-dimensional computational research on heat transmission augmentation within a square channel containing 45<sup>o</sup> V-type double-baffles positioned on the lower and top parts at regular intervals in the turbulence zone for Reynolds numbers (Re) that vary from 3000 to 20,000. The primary goal of this research is to increase the thermal effectiveness and relative Nusselt number (Nu/Nu<inf>0</inf>), in order to conserve energy and reduce the size of the heating or cooling system. The simulations utilize a finite volume approach in common with the SIMPLE algorithm, whereas the turbulent model used is the realizable k–ε. The baffles are designed to be separated vertically for reducing pressure loss. Both single V-baffles and double V-baffles have four relative pitches (PR = 0.4, 0.5, 0.6, and 1.0) and height/blockage ratios (BR = 0.05, 0.1, 0.15, and 0.2), with a fixed attack angle (α) of 45<sup>o</sup>. The computational findings show that both V-baffles are capable of producing the primary vortices, but only the double V-baffles have the ability to provide the impinging streams onto the wall, cooling the region behind the baffles. This suggests that the double V-baffles not only boost heat transmission but also reduce frictional loss. When compared to a single V-baffle, the double ones enhance heat transfer by an average of 1.04–9.94% while decreasing frictional loss by an average of 9.88–31.73%. The thermal effectiveness factor (TEF) of the double V-baffles ranges from 1.03 to 3.21, and its peak value of around 3.21 is for PR = 0.4, BR = 0.05, at lower Re.
Some of the metrics are blocked by your
consent settings
Thermal effectiveness enhancement in heat exchange tube using louver-punched V-baffles
(2024-06-15)
Promvonge, Pongjet
;
Promthaisong, Pitak
;
Skullong, Sompol
;
Nakhchi, Mahdi Erfanian
An efficient technique for reducing frictional loss by punching holes on the surface of vortex generators has been extensively researched, particularly in the form of louver-punched holes. This article describes an experimental and numerical examination of thermal effectiveness in a heat exchange tube with louvered baffle vortex generators (LBVG). As air was directed to the LBVG-inserted tube with a consistent heat flux, the flow was measured in a turbulent regime. The LBVGs were set at 30° attack angle (α) and mounted at regular intervals on a two-sided flat tape with one relative baffle height (b/D = R<inf>B</inf> = 0.25) and pitch (P/D= R<inf>P</inf> = 1) at the first step. The baffles had five different louver angles (θ = 0 ˗ 90°) and three different relative louver sizes (L<inf>R</inf>= e/b = 0.4, 0.56, and 0.72). The Nusselt number ratio (Nu<inf>R</inf>), friction factor ratio (f<inf>R</inf>), and thermal effectiveness factor (TEF) were utilized to quantify the performance of LBVGs. The findings showed that LBVGs had much lower f<inf>R</inf> values than solid baffles (without holes), whereas Nu<inf>R</inf> values decreased slightly. When θ and L<inf>R</inf> were reduced, the f<inf>R</inf> and Nu<inf>R</inf> for LBVGs increased until they resembled those for solid baffles. Through numerical simulations using the realizable k-ε turbulent model based on the finite volume method, the flow and temperature fields of various cases were generated; their results were verified via analysis of the fluid flow patterns. The computational findings revealed that the jet flow from the louver hole could boost heat transfer, and TEF of LBVGs varied depending on the placement of the hole. According to the computations, the optimal TEF at R<inf>P</inf> = 0.75, L<inf>R</inf> = 0.4, and θ<inf>1</inf> = 20° is roughly 2.64, and the hole should be placed toward the baffle ends rather than in the middle.
Some of the metrics are blocked by your
consent settings
Heat transfer analysis in a tube contained with louver-punched triangular baffles
(2024-06-01)
Jayranaiwachira, Nuthvipa
;
Promvonge, Pongjet
;
Promthaisong, Pitak
;
Nakhchi, Mahdi Erfanian
;
Skullong, Sompol
The present research assesses the thermal effectiveness of a heat exchange tube incorporating louver-punched triangular baffle (LPTB) vortex generators under turbulent conditions. For Reynolds numbers between 4760 and 29,270, the heat transfer and flow behaviors in the consistent heat-fluxed tube equipped with LPTBs were studied numerically and experimentally. A single baffle height/blockage ratio (b/D = B<inf>R</inf> = 0.25) and relative baffle pitch (P/D = P<inf>R</inf> = 1) were used for both baffle attack angles, (α) 30° and 45°, along with three louver size ratios (e/b = L<inf>R</inf> = 0.24–0.56) as well as five louver angles (θ = 0°, 20°, 30°, 45°, 60°, and 90°). The results show that as the L<inf>R</inf> and θ values decrease, the Nusselt number (Nu) and friction factor (f) of the LPTB rise owing to the improved fluid mixing process generated by streamwise vortices with stronger turbulence kinetic energy. The LPTB with L<inf>R</inf> = 0 and θ = 0° provides the greatest f and Nu of about 22.18 and 5.1 times, respectively, although the one with L<inf>R</inf> = 0.24 and θ = 45° has the largest TEF of about 2.39 and 2.5 for the α = 30° and 45° LPTBs, respectively. Furthermore, an examination into the thermal and flow patterns was conducted through a three-dimensional computation; the validation of the numerical and experimental data yielded satisfactory results. Using measured data, the f and Nu correlations of the α = 30° and 45° LPTBs were additionally established.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results