KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Srathonghuam, Kamonwan

Search Results

Now showing 1 - 3 of 3
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Gas Flow and Ablation of 122 mm Supersonic Rocket Nozzle Investigated by Conjugate Heat Transfer Analysis
    (2022-09-01)
    Thongsri, Jatuporn
    ;
    Srathonghuam, Kamonwan
    ;
    Boonpan, Adulyasak
    The propellant gas flow of a supersonic rocket in inappropriate operating conditions can cause excessive ablation inside a nozzle. In this research, conjugate heat transfer analysis (CHTA), consisting of computational fluid dynamics (CFD) and finite element analysis (FEA), was applied to investigate the gas flow and ablation of a 122 mm nozzle as a case study in the transient state, based on actual operating conditions. First, the nozzle was tested in a static experiment. Then, the experimental results were employed for CHTA settings and validation. Next, after completing the CFD calculation, the results revealed that the nozzle’s gas flow, temperature, pressure, Mach number, shock, etc. were consistent with theoretical results. Finally, using the CFD results as loads, the FEA results showed the equivalent von Mises stress (σ<inf>v</inf>), which was consistent with the ablation results from the experiment, as expected. The more the σ<inf>v</inf>, the greater the ablation. Both σ<inf>v</inf> and ablation were high near the throat and decreased further away. In addition, increasing the insulators’ thickness reduced σ<inf>v</inf>, leading to ablation reduction. The research findings contribute to an understanding of ablation and the methodology of employing CHTA to improve the design of 122 mm and other nozzles with reduced ablation for higher efficacy.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    CFD Simulation of gas flow in a 122 mm supersonic nozzle
    (2022-01-01)
    Srathonghuam, Kamonwan
    ;
    Boonpan, Adulyasak
    ;
    Thongsri, Jatuporn
    Developing a highly efficient supersonic rocket propulsion system requires understanding gas flow inside a nozzle. In this research, Computational Fluid Dynamics (CFD) was applied to investigate a gas flow behavior of a 122 mm, de Laval nozzle in a steady state. Based on an actual operating condition, CFD results showed the gas flow behavior leading to shock, separation, recirculation, reattachment, Mach number, total temperature, and pressure of the nozzle, consistent with the theory. In addition, the Mach number increases with increasing the nozzle's length, as expected. The results found can be employed to design a new high-efficiency supersonic nozzle.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Vibration Analysis and Development of a Submersible Ultrasonic Transducer for an Application in the Inhibitory Activity of Pathogenic Bacteria
    (2021-01-01)
    Srathonghuam, Kamonwan
    ;
    Wonganu, Benjamaporn
    ;
    Busayaporn, Wutthikrai
    ;
    Thongsri, Jatuporn
    Development of a new generation of a submersible ultrasonic transducer (SUT) using vibrational analysis aimed for higher efficiency and inhibitory activity of pathogenic bacteria has been presented. The SUT with a dual-stepped shape of front mass and PZT8 transducer working at 50W, 110V, 50 kHz has been examined by the plate counting method. It was found that the SUT could inhibit pathogenic bacteria, e.g., Escherichia coli, Salmonella typhi, Staphylococcus epidermidis, and Staphylococcus aureus. For the vibrational analysis, the results were derived from structural and acoustic simulations using harmonic response analysis (HRA) in ANSYS software. In the structural simulation, the results showed a natural frequency and total deformations both inside and outside of the original SUT corresponding to the results measured by a laser doppler vibrometer. The acoustic simulation, set up as an actual operation at different depths from the water surface, has been applied. The HRA revealed various distributions of acoustic pressure. For further distances away from the SUT, the acoustic pressure decreased. When the SUT has been submerged deeper into the media, the acoustic pressure becomes larger at positions close to the bottom of the tank. This discovery is consistent with power concentration measurement. For the development of the SUT, this research proposed other 5 models as the candidate to be investigated. The results from the acoustic simulation confirmed that the different shapes of the front mass provided different acoustic pressure distributions. The wider head of the front mass in the modified dual-stepped shape generated the highest acoustic pressure and was fully distributed through an all-over cleaning tank. Therefore, this proposed model is suitable for industrial commercialization and possesses the inhibitory activity of pathogenic bacteria.