DSpace-CRIS

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
Recent progress in flexibility effects on wing aerodynamics and acoustics
(2021-01-01)
Prapamonthon, Prasert
;
Yin, Bo
;
Yang, Guowei
;
Zhang, Mohan
;
Lu, Panpan
Since the theoretical aeroelasticity for flapping-wing aerodynamics was introduced in the 1920s, the effects of flexibility on aeroelasticity have been paid more attention to aerodynamic design. In recent years, the trait of the wing flexibility is applied for small-scale wings of biomimetic flyers including micro air vehicles and mini unmanned aerial vehicles. Until now, the aerodynamic performance and great agility of these flyers, which are beneficially used for military missions and other civilian applications, have been improved through surrogate flapping wings with the favorable effects of the flexibility. As per the aeroelasticity principle for the forward flying, the chordwise flexibility of an elastic flapping wing can generate thrust and lift redistributions, whereas the spanwise flexibility can result in variations of the angle of attack and the shift of phase along the wingspan direction. Consequently, all vortices generated by the flapping wing i.e. (1) leading-edge vortices, (2) tip vortices, and (3) trailing-edge vortices are blended supportively, thereby improving the aerodynamic performance and agility. Hence, the growth of research and development of the aerodynamic performance and agility for these flyers under the influence of flexible wings increases through experimental and computational studies dynamically and rapidly. This review aims to highlight the important role of the flexibility in the recent progress in wing aerodynamics of these flyers through several wing models done by famous groups of experts in this field. In addition, this review includes the acoustics of the wings under the flexibility effects which is considered as a new key for better flyer design and improvement. A comprehensive understanding of the integrated aerodynamics and acoustics under the wing flexibility is, therefore, needed.
Some of the metrics are blocked by your
consent settings
Understanding of temperature and cooling effectiveness sensitivity of a film-cooled vane under coolant inlet temperature effect: A case study
(2019-09-01)
Prapamonthon, Prasert
;
Yin, Bo
;
Yang, Guowei
;
Zhang, Mohan
This work presents a case study of the relationship between temperature and cooling effectiveness of a film-cooled vane under effect of coolant inlet temperature in two aspects based on the actual and base coolant inlet temperatures. Results are conducted in terms of temperature, cooling effectiveness, and heat transfer coefficient based on surface and volume analyses using CFD/CHT approach. Sensitivity of the vane temperature and cooling effectiveness under this effect is discussed also. The results show that for the surface basis, although the cooling effectiveness obtained from the actual coolant inlet temperature is quite straightforward and follows the definition of the cooling effectiveness directly, the cooling effectiveness obtained from the base coolant inlet temperature is more understandable because it corresponds to the variation of the surface temperature. Based on the volume basis and the base coolant inlet temperature, the 8% increase in the coolant inlet temperature causes the reduction of the average and maximum cooling effectiveness, which corresponds to 18 K and 25 K increments in the average and minimum temperatures, respectively. However, when the actual coolant inlet temperature is used, the variation of the cooling effectiveness is rather insensitive due to the reduction of heat flux on the hot-side wall.
2
Some of the metrics are blocked by your
consent settings
Numerical prediction of cooling performance sensitivity of 1st stage nozzle guide vane under aerothermal conditions
(2019-01-01)
Prapamonthon, Prasert
;
Yin, Bo
;
Yang, Guowei
;
Zhang, Mohan
To obtain high power and thermal efficiency, the 1<sup>st</sup> stage nozzle guide vanes of a high-pressure turbine need to operate under serious circumstances from burned gas coming out of combustors. This leads to vane suffering from effects of high thermal load, high pressure and turbulence, including flow-separated transition. Therefore, it is necessary to improve vane cooling performance under complex flow and heat transfer phenomena caused by the integration of these effects. In fact, these effects on a high-pressure turbine vane are controlled by several factors such as turbine inlet temperature, pressure ratio, turbulence intensity and length scale, vane curvature and surface roughness. Furthermore, if the vane is cooled by film cooling, hole configuration and blowing ratio are important factors too. These factors can change the aerothermal conditions of the vane operation. The present work aims to numerically predict sensitivity of cooling performances of the 1<sup>st</sup> stage nozzle guide vane under aerodynamic and thermal variations caused by three parameters i.e. pressure ratio, coolant inlet temperature and height of vane surface roughness using Computational Fluid Dynamics (CFD) with Conjugate Heat Transfer (CHT) approach. Numerical results show that the coolant inlet temperature and the vane surface roughness parameters have significant effects on the vane temperature, thereby affecting the vane cooling performances significantly and sensitively.
1

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results