DSpace-CRIS

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
Incorporation of Steel Fibers to Enhance Performance of Sustainable Concrete Made with Waste Brick Aggregates: Experimental and Regression-Based Approaches
(2023-11-01)
Yooprasertchai, Ekkachai
;
Bahrami, Alireza
;
Saingam, Panumas
;
Hussain, Qudeer
;
Ejaz, Ali
Each year, an enormous amount of construction waste is produced worldwide. The reuse of construction waste in construction works is a sustainable solution. The present research work utilized recycled brick aggregates in the production of concrete. The resulting concrete exhibited substandard splitting tensile, flexural, and compressive properties. Steel fibers were used to improve these substandard properties of recycled brick aggregate concrete. The volume fractions of 1%, 2%, and 3% for steel fibers were mixed in concrete, whereas recycled brick aggregates were obtained from solid fired-clay bricks, hollow fired-clay bricks, and cement–clay interlocking bricks. The compressive strength was enhanced by up to 35.53% and 66.67% for natural and recycled brick aggregate concrete, respectively. Strengthened flexural specimens demonstrated up to 8765.69% increase in the energy dissipation. Specimens strengthened with steel fibers showed substantially improved splitting tensile, flexural, and compressive responses. Separate equations were proposed to predict the peak compressive strength, strain at peak compressive strength, elastic modulus, and post-peak modulus of recycled brick aggregate concrete. The proposed regression equations were utilized in combination with an existing compressive stress–strain model. A close agreement was observed between experimental and predicted compressive stress–strain curves of recycled brick aggregate concrete.
Some of the metrics are blocked by your
consent settings
Low-Cost Fiber Chopped Strand Mat Composites for Compressive Stress and Strain Enhancement of Concrete Made with Brick Waste Aggregates
(2022-11-01)
Joyklad, Panuwat
;
Saingam, Panumas
;
Ali, Nazam
;
Ejaz, Ali
;
Hussain, Qudeer
Given the excessive demolition of structures each year, the issues related to the generated structural waste are striking. Bricks being a major constituent in the construction industry, also hold a significant proportion of the construction waste generated annually. The reuse of this brick waste in new constructions is an optimal solution considering cost-effectiveness and sustainability. However, the problems related to the substandard peak stress and ultimate strain of concrete constructed with recycled brick aggregates (CRAs) limit its use in non-structural applications. The present study intends to improve the unsatisfactory mechanical characteristics of CRAs by utilizing low-cost glass fiber chopped strand mat (FCSM) sheets. The efficacy of FCSM sheets was assessed by wrapping them around CRA specimens constructed with different concrete strengths. A remarkable increase in the peak compressive stress and the ultimate strain of the CRA specimens were observed. For low, medium, and high strength CRAs, the ultimate strain improved by up to 320%, 308%, and 294%, respectively, as compared to the respective control specimens. Several existing analytical models were utilized to predict the peak compressive stress and ultimate strain of the CRAs strengthened using FCSM sheets. None of the considered models reproduced experimental results accurately. Therefore, equations were formulated using regression predicting the peak stress and ultimate strain of the CRAs confined with FCSM sheets. The predicted values were found to correlate well with the experimental values.
Some of the metrics are blocked by your
consent settings
Structural Behavior of LC-GFRP Confined Waste Aggregate Concrete Square Columns with Sharp and Round Corners
(2022-09-01)
Parichatprecha, Rattapoohm
;
Rodsin, Kittipoom
;
Chaiyasarn, Krisada
;
Ali, Nazam
;
Suthasupradit, Songsak
Reusing construction brick waste to fabricate new concrete is an economical and sustainable solution for the ever-increasing quantity of construction waste. However, the substandard mechanical properties of the concrete made using recycled crushed brick aggregates (RBAC) have limited its use mainly to non-structural applications. Several studies have shown that the axial compressive performance of the concrete is a function of the lateral confining pressure. Therefore, this study proposes to use low-cost glass fiber-reinforced polymer (LC-GFRP) wraps to improve the substandard compressive strength and ductility of RBAC. Thirty-two rectilinear RBAC specimens were constructed in this study and tested in two groups. The specimens in Group 1 were tested without the provision of a corner radius, whereas a corner radius of 26 mm was provided in the Group 2 specimens. Specimens in both groups demonstrated improved compressive behavior. However, the premature failure of LC-GFRP wraps near the sharp corners in Group 1 specimens undermined its efficacy. On the contrary, the stress concentrations were neutralized in almost all Group 2 specimens with a 26 mm corner radius, except low-strength specimen with six layers of LC-GFRP. As a result, Group 2 specimens demonstrated a more significant improvement in peak compressive strength and ultimate strain than Group 1 specimens. An analytical investigation was carried out to assess the efficiency of existing compressive stress–strain models to predict the peak compressive stress and ultimate of LC-GFRP-confined RBAC. Existing FRP models were found unreliable in predicting the key parameters in the stress–strain curves of LC-GFRP-confined RBAC. Equations were proposed by using nonlinear regression analysis, and the predicted values of the key parameters were found in good agreement with the corresponding experimental values.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results