KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Bhupaijit, PamornnarumolSubject: search.filters.subject.Combustion technique

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Structural, microstructure and electrical properties of La2O3-doped Bi0.5(Na0.68K0.22Li0.1)0.5TiO3 lead-free piezoelectric ceramics synthesized by the combustion technique
    (2015-07-01)
    Bhupaijit, Pamornnarumol
    ;
    Kornphom, Chittakorn
    ;
    Vittayakorn, Naratip
    ;
    Bongkarn, Theerachai
    The effect of firing temperatures on phase formation, microstructure and physical properties of [Bi<inf>0.5</inf>(Na<inf>0.68</inf>K<inf>0.22</inf>Li<inf>0.1</inf>)<inf>0.5</inf>TiO<inf>3</inf>] doped with La<inf>2</inf>O<inf>3</inf> at 0.1 wt% (BNKLLT) ceramics prepared by the combustion method was studied. Glycine was used as fuel and the ratio of raw material (corresponding oxidant metal nitrate) with fuel was about 1:0.56. The samples were calcined at 600-900 °C for 2 h and sintered at 1075-1150 °C for 2 h. The single rhombohedral peroveskite phase of BNKLLT powders was observed from the sample calcined at 750 °C for 2 h. The BNKLLT ceramics exhibited a pure peroveskite phase in all samples. The microstructures of the BNKLLT powders exhibited an agglomerated form while the grain ceramics exhibited a square shape. The average particle size and average grain size increased with increasing firing temperatures. The density, dielectric constant (ε<inf>r</inf> and ε<inf>m</inf>), P<inf>r</inf> and d<inf>33</inf> tended to increase with increasing sintering temperatures up to 1100 °C and then decreased. The maximum density (5.73 g/cm<sup>2</sup>), maximum dielectric constant (ε<inf>r</inf>~2572 and ε<inf>m</inf>~5536), good ferroelectric properties (P<inf>r</inf>~35.78 μC/cm<sup>2</sup> and E<inf>c</inf>~22.42 kV/cm) and highest d<inf>33</inf> (210 pC/N) were obtained by the sample sintered at 1100 °C for 2 h.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Fabrication of 0.62[0.75PMN-0.25PYbN]-0.38PT ceramics using one step calcination via combustion technique
    (2013-01-01)
    Kornphom, Chittakorn
    ;
    Bhupaijit, Pamornnarumol
    ;
    Vittayakorn, Naratip
    ;
    Bongkarn, Theerachai
    The fabrication of 0.62[0.75Pb(Mg<inf>1/3</inf>Nb<inf>2/3</inf>)O <inf>3</inf>-0.25Pb(Yb<inf>1/2</inf>Nb<inf>1/2</inf>)O<inf>3</inf>]-0. 38PbTiO<inf>3</inf> ceramics (abbreviated PMN-PYbN-PT) by combustion technique using one step calcination was studied. Glycine was used as fuel to reduce the reaction temperature. The phase formation, microstructure, density and dielectric properties were investigated. It was shown that calcination method is more effective than conventional solid state reaction. The crystal structure of PMN-PYbN-PT ceramics exhibited a single rhombohedral perovskite phase in samples sintered at temperature T < 1200°C. The pyrochlore phase was found in the samples sintered at 1200°C. The average grain size of the ceramics increases with increasing sintering temperature. The density and the maximum dielectric constant increases with increasing sintering temperatures up to 1150°C, and then decreases at higher temperatures. The maximum density (8.04 g/cm<sup>3</sup>), highest dielectric constant (19000) and excellent ferroelectric properties (P<inf>r</inf> ∼ 41.05 μC/cm<sup>2</sup>and E<inf>c</inf> ∼ 8.1 kV/cm) were obtained for the sample sintered at 1150°C. © 2013 Copyright Taylor and Francis Group, LLC.