KMITL
Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1
Browse
6 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Item, Adaptive K-Repetition Transmission with Site Diversity Reception for Energy-Efficient Grant-Free URLLC in 5G NR(2024-01-01) ;Dataesatu, Arif ;Sanada, Kosuke ;Hatano, Hiroyuki ;Mori, KazuoBoonsrimuang, PisitThe fifth-generation (5G) new radio (NR) standard employs ultra-reliable and low-latency communication (URLLC) to provide real-time wireless interactive capability for the internet of things (IoT) applications. To satisfy the stringent latency and reliability demands of URLLC services, grant-free (GF) transmissions with the K-repetition transmission (K-Rep) have been introduced. However, fading fluctuations can negatively impact signal quality at the base station (BS), leading to an increase in the number of repetitions and raising concerns about interference and energy consumption for IoT user equipment (UE). To overcome these challenges, this paper proposes novel adaptive K-Rep control schemes that employ site diversity reception to enhance signal quality and reduce energy consumption. The performance evaluation demonstrates that the proposed adaptive K-Rep control schemes significantly improve communication reliability and reduce transmission energy consumption compared with the conventional K-Rep scheme, and then satisfy the URLLC requirements while reducing energy consumption. - Some of the metrics are blocked by yourconsent settings
Item type:Item, Adaptive K-Repetition Transmission Employing Site Diversity Reception for 5G NR Uplink Grant-Free URLLC(2023-01-01) ;Dataesatu, Arif ;Sanada, Kosuke ;Hatano, Hiroyuki ;Mori, KazuoBoonsrimuang, PisitThe Internet of Things (IoT) is currently being employed for wireless real-time interactive systems with ultra-reliable and low-latency communications (URLLC) that provide high service quality for the fifth generation (5G) new radio (NR) standard. Grant-free (GF) transmission with K-Repetition (K-Rep) is a transmission technique that aims to meet the URLLC requirements. However, the K-Rep increases the number of packet transmissions, which may cause severe interference and substantial energy consumption. This paper employs site diversity reception to the GF K-Rep scheme and proposes its adaptive control mechanism to decrease the number of repeated transmissions in order to improve communication reliability and energy consumption for IoT URLLC users. According to our simulation results, the proposed site diversity reception for the K-Rep scheme can significantly improve the reliability compared with the conventional K-Rep under single-cell reception. Additionally, the proposed adaptive K-Rep control scheme can reduce the transmission energy consumption greatly, hence saving battery resource of IoT URLLC users. - Some of the metrics are blocked by yourconsent settings
Item type:Item, System Performance Enhancement with Energy Efficiency Based Sleep Control for 5G Heterogeneous Cellular Networks(2022-04-01) ;Dataesatu, Arif ;Sanada, Kosuke ;Hatano, Hiroyuki ;Mori, KazuoBoonsrimuang, PisitThis paper presents an improved sleep control algorithm for small base stations (SBSs) in 5G New Radio (NR) heterogeneous cellular networks (HetNets). HetNets consist of various base station tiers, including macro base stations (MBSs) and small base stations (SBSs), and have been suggested as a promising solution to enhance wireless coverage and network capacity, employing many SBSs into the MBS coverage. However, power consumption increases significantly as a result of an increase in the number of the SBSs. To solve this problem, the SBS sleep control has been proposed to reduce power consumption for the SBSs and improves energy efficiency, whereas it deteriorates system throughput compared with no sleep control system, consequently degrading the quality of service (QoS) performance at user equipments (UEs). This paper proposes an enhanced algorithm for SBS sleep control based on energy efficiency as a decision criterion for SBS operating state. From the evaluation results through computer simulation, the proposed scheme can provide improved performance for both energy efficiency and system throughput simultaneously, that is it can improve energy efficiency while maintaining almost the same system throughput as the no sleep control system. Concretely, the proposed scheme has the 14.89% improvement in energy efficiency while providing almost the same system throughput of over 99%, compared with no sleep control system - Some of the metrics are blocked by yourconsent settings
Item type:Item, Energy Efficiency Enhancement in 5G Heterogeneous Cellular Networks Using System Throughput Based Sleep Control Scheme(2020-02-01) ;Dataesatu, Arif ;Boonsrimuang, Pornpawit ;Mori, KazuoBoonsrimuang, PisitCurrently, Cellular architectures are designed with an efficient providing infrastructure is one of the critical challenges in 5G dense heterogeneous cellular networks (HetNets). By adding many small base stations (SBSs) in a macro base station (MBS) is one way to support the rapid growth of mobile data communication, high data rate services and to provide continuous coverage. The high number of network elements leads to a significant increase in power consumption. To solve the problem, the SBS on/off algorithm has been introduced to reduce power consumption but also reduced energy efficiency as we called the conventional schemes. This paper we proposed as the SBS switching to sleep state algorithm based on the system throughput (MBS cell throughput and SBS cell throughput) is used the decision criteria for SBS to be in the sleep state. The simulation results, The proposed scheme can reduce the total power consumption of the network and enhance energy efficiency more than the conventional schemes. - Some of the metrics are blocked by yourconsent settings
Item type:Item, Comparative analysis of radio propagation models for LTE network on the sky train(2019-04-29) ;Dataesatu, Arif ;Boonsrimuang, Pornpawit ;Mori, KazuoBoonsrimuang, PisitThe usage of smartphones and computer for the data communications have become a more integrated part of everyday life for a large majority of the population. One important mode of transportation is the sky train, and users increasingly expect to be able to communicate satisfyingly while traveling on the train: MRT (Mass Rapid Transit Authority of Thailand). However, the radio conditions inside a train are very complex. A possibly large number of users that use at the same time, moving at high speed and a special environment on elevated guideways (height 20 m) are created big challenges for the data communication in LTE network. The accuracy of the path loss model is a very important tool to design the coverage areas and improve the performance in LTE network. This paper that studies and improve the accuracy of the path loss model, which use to design the coverage area of the LTE network under the sky train environment. Normally the radio propagation models under the urban area are designed on the ground approximately 1-3 meters in height but are not suitable for the user in the sky train, which is 20 meters high. we propose the Ericsson urban model in the special environment as sky train by the new values for a0 from 36.2 to 47.2 and a1 from 30.2 to 14.2. The proposed new coefficient for Ericsson urban model shows the most accurate path loss under the sky train with the urban area. The filed measurement is used by the smartphone-based measurement for low cost and practical usage. - Some of the metrics are blocked by yourconsent settings
Item type:Item, A PAPR Reduction for FBMC-OQAM Signals using ABC-OPTS Scheme(2019-04-29) ;Boontra, Pitchaya ;Mata, Tanairat ;Dataesatu, Arif ;Mori, KazuoBoonsrimuang, PisitPartial Transmit Sequence (PTS) scheme has been applied to the OFDM signal for solving the high PAPR problem which can achieve better PAPR performance. However, because of the structure of the FBMC-OQAM signal which is different from the OFDM signal, the PTS scheme is not suitable for the FBMC-OQAM signal. For this reason, this paper considers the PAPR reduction for FBMC-OQAM signal. This paper proposes an overlapped PTS (OPTS) with Artificial Bee Colony (ABC) algorithm. The silent features are to improve the PAPR by modifying the PTS scheme as OPTS scheme and less computational complexity in the PAPR optimization process by using the ABC algorithm. The PAPR reduction effectiveness of the proposed method has been confirmed by the simulation results in the paper.
