KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Search Results

Now showing 1 - 10 of 14

Some of the metrics are blocked by your
consent settings
Development of data-driven framework for the geotechnical behavior of xanthan gum-treated clay reinforced with polypropylene fibers
(2026-01-01)
Onyelowe, Kennedy C.
;
Kamchoom, Viroon
;
Baldovino, Jair De Jesús Arrieta
;
Kumar, S. Anandha
;
Ebid, Ahmed M.
This study develops a robust data-driven modeling framework to predict the unconfined compressive strength (UCS) and stiffness (Go) of low-plasticity clay soils stabilized with Xanthan Gum (XG) and Polypropylene Fiber (PPF), aiming to advance sustainable geotechnical design. A total of 108 soil specimens were prepared with varying XG dosages and cured over different periods, and predictive models were constructed using a Decision Table algorithm optimized with six bio-inspired optimization techniques. Among these, the Firefly-optimized model consistently provided the highest accuracy, demonstrating reliable agreement between predicted and measured values. Sensitivity analysis identified XG dosage, curing time, and dry density as the most influential factors governing UCS and Go. These findings highlight the strong potential of the proposed machine learning framework to guide field engineers in optimizing mix design parameters for improved mechanical behavior of bio-treated soils, reducing reliance on time-consuming and costly laboratory tests while promoting environmentally sustainable foundation practices. The need for this study arises from the growing demand for green soil stabilization techniques that minimize the use of cement and lime while still ensuring reliable performance in construction. Its applicability extends to real-world geotechnical projects such as embankments, road subgrades, and shallow foundations, where predictive modeling can significantly streamline design decisions and improve long-term sustainability.
Some of the metrics are blocked by your
consent settings
Mechanical properties of self compacting concrete reinforced with hybrid fibers and industrial wastes under elevated heat treatment
(2025-12-01)
Onyelowe, Kennedy C.
;
Hanandeh, Shadi
;
Kamchoom, Viroon
;
Ebid, Ahmed M.
;
Zurita Polo, Susana Monserrat
Machine learning prediction of the mechanical properties of self-compacting concrete (SCC) reinforced with hybrid fibers, incorporating industrial wastes like fly ash and blast furnace slag, and cured under elevated heat provides a reliable and efficient alternative to traditional laboratory experiments. In this work, extensive literature review leading to the collection, sorting and curation of a global database representative of the mechanical properties of self-compacting concrete reinforced with hybrid fiber mixed with industrial wastes for sustainable construction was conducted. The collected database constituted traditional concrete components and admixtures such as Cement (C), Fly ash (FA), Slag (BFS), Fine Aggregate (FAg), Coarse Aggregate (CAg), Water (W), Superplasticizer (PL), Fiber (Fi), and Temperature (Temp.) studied under the mechanical properties such as the Compressive Strength (Fc), Tensile Strength (Fsp), and Flexural Strength (Ff). The collected 114 records were divided into training set (90 records = 80%) and validation set (24 records = 20%) following the guidelines for data partitioning for optimal performance in machine learning predictions. Different advanced machine learning methods created using “Weka Data Mining” software version 3.8.6 were applied such as “Semi-supervised classifier (Kstar)”, “M5 classifier (M5Rules), “Elastic net classifier (ElasticNet), “Correlated Nystrom Views (XNV)”, and “Decision Table (DT)” to predict the output. The Hoffman/Gardener and SHAP techniques are used to estimate the sensitivity of the input parameter on the output. Finally, various performance metrics are used to evaluate the reliability of the models. The results show that the machine learning models show varying degrees of predictive accuracy, with the Kstar and XNV models consistently outperforming others across all mechanical properties. However, Kstar with accuracies of 96.5%, 96.0%, and 97.0% for Fc, Fsp, and Ff predictions, respectively proposed the most decisive model. Also, the Hoffman and Gardener method highlights the role of the binders, chemical additives, and curing, whereas SHAP attributes greater importance to aggregates and binder interactions.
Some of the metrics are blocked by your
consent settings
Modeling the compressive strength behavior of concrete reinforced with basalt fiber
(2025-12-01)
Onyelowe, Kennedy C.
;
Ebid, Ahmed M.
;
Hanandeh, Shadi
;
Kamchoom, Viroon
;
Awoyera, Paul
This research investigates the compressive strength behavior of basalt fiber-reinforced concrete (BFRC) using machine learning models to optimize predictions and enhance its practical applications. The study incorporates various modeling techniques, including Artificial Neural Networks (ANN), k-Nearest Neighbors (KNN), Support Vector Machines (SVM), Decision Trees, and Random Forest (RF), to evaluate their predictive capabilities. Basalt Fiber Reinforced Concrete (BFRC) is a composite material that incorporates basalt fibers into traditional concrete to enhance its mechanical and durability properties. The use of basalt fibers, derived from natural volcanic rocks, aligns with sustainability goals due to their eco-friendliness, cost-effectiveness, and high performance. BFRC combines structural excellence with sustainability, making it an ideal material for modern construction practices. Its ability to enhance performance, reduce environmental impact, and ensure long-term durability positions it as a pivotal solution for sustainable infrastructure development. The developed models were used to predict compressive strength of basalt fiber concrete (Cs_bf) using the concrete mixture contents, age, and fiber dimensions. All the developed models were created using “Orange Data Mining” software version 3.36. A total of three hundred and nine (309) records were collected from literature for compressive strength for different mixing ratios of basalt fiber concrete with concrete at different ages. Each record contains the following data: C-Cement content (Kg/m3), FA-Fly ash content (Kg/m3), W-Water content (Kg/m3), SP-Super-plasticizer content (Kg/m3), CAg-Coarse aggregates content (Kg/m3), FAg-Fine aggregates content (Kg/m3), Age-The concrete age at testing (days), L_b-length of basalt fibers (mm), d_bf-Diameter of basalt fibers (µm), V_bf-Volume content of basalt fibers (%) and Cs_bf-Compressive strength of basalt fibre concrete (MPa). The collected records were divided into training set (249 records≈80%) and validation set (60 records≈ 20%). At the end of the process, it can be shown that the present research work outclassed other ML techniques applied in the previous research paper, which reported the utilization of the same size of data entries and basalt reinforced concrete constituents. Taylor chart for measured compressive strength of basalt fiber reinforced concrete predicted with ANN, KNN, SVM, Tree and RF is presented for comparing the performance of predictive models by illustrating three key statistical measures simultaneously: the correlation coefficient (R), the normalized standard deviation (σ), and the root-mean-square error (RMSE). Finally, it can be deduced that after considering the performance indices of the selected ensemble and classification models utilized in this present research paper, all the developed modes have almost the same excellent level of accuracy 95%, but ANN, KNN, and SVR produced R2 of 0.98 each with KNN producing MAE of 1.4 MPa, and MSE of 2.5 MPa to outperform ANN and SVR which produced MAE of 1.55 MPa/MSE of 4.1 MPa and MAE of 1.6 MPa/MSE of 3.85 MPa, respectively. Three techniques were used to estimate the impact of each input on the compressive strength, namely correlation matrix, sensitivity analysis and relative importance chart.
Some of the metrics are blocked by your
consent settings
Developing advanced datadriven framework to predict the bearing capacity of piles on rock
(2025-12-01)
Onyelowe, Kennedy C.
;
Hanandeh, Shadi
;
Kamchoom, Viroon
;
Ebid, Ahmed M.
;
Reyes Silva, Fabián Danilo
Developing accurate predictive models for pile bearing capacity on rock is crucial for optimizing foundation design and ensuring structural stability. This research presents an advanced data-driven framework that integrates multiple machine learning algorithms to predict the bearing capacity of piles based on geotechnical and in-situ test parameters. A comprehensive dataset comprising key influencing factors such as pile dimensions, geological characteristics, and penetration resistance was utilized to train and validate various models, including Kstar, M5Rules, ElasticNet, XNV, and Decision Trees. The Taylor diagram and statistical evaluations demonstrated the superiority of the proposed models in capturing complex nonlinear relationships, with high correlation coefficients and low root mean square errors indicating robust predictive capabilities. Sensitivity analyses using Hoffman and Gardener’s approach and SHAP values identified the most influential parameters, revealing that penetration resistance, pile embedment depth, and geological conditions significantly impact pile capacity. The findings underscore the effectiveness of machine learning in geotechnical engineering applications, offering a reliable and efficient alternative to traditional empirical and analytical methods. The developed framework provides engineers and practitioners with a powerful tool for improving pile design accuracy, reducing uncertainties, and optimizing construction practices. Future research should focus on expanding the dataset with diverse geological conditions and exploring hybrid modeling techniques to enhance prediction accuracy further.
Some of the metrics are blocked by your
consent settings
Evaluating the impact of waste marble on the compressive strength of traditional concrete using machine learning
(2025-12-01)
Onyelowe, Kennedy C.
;
Kamchoom, Viroon
;
Ebid, Ahmed M.
;
Hanandeh, Shadi
;
Zurita Polo, Susana Monserrat
Waste marble, an industrial byproduct generated from marble cutting and polishing processes, can be effectively utilized as a partial replacement in concrete mixtures. Incorporating waste marble in concrete not only addresses environmental concerns related to marble waste disposal but also contributes to the sustainability of construction materials. Using machine learning (ML) to predict the impact of waste marble on the compressive strength of traditional concrete offers several advantages over repeated laboratory experiments. ML offers a powerful alternative to costly and time-consuming laboratory experiments, enabling faster and more sustainable exploration of the potential of waste marble in improving concrete’s compressive strength. This research has focused on evaluating the impact of waste marble on the compressive strength of traditional concrete using machine learning (ML). Advanced ML techniques such as the Group Methods Data Handling Neural Network (GMDH-NN), Support Vector Regression (SVR), K-Nearest Neighbors (kNN) and Adaptive Boosting (AdaBoost) have been applied in this research work. The GMDH-NN model was created using GMDH Shell 3.0 software, while AdaBoost, SVR and kNN models were created using “Orange Data Mining” software version 3.36. Error indices such as the sum of squared error (SSE), mean absolute error (MAE), mean squared error (MSE), root mean squared error (RMSE), and Error (%), and performance metrics such as Accuracy % and the R2 between predicted and calculated compressive strength parameters were used to evaluate the overall behavior of the models. Finally, the Hoffman sensitivity analysis procedure was applied to determine the individual relative impact of the input variables on the output. At the end of the processes, a total of 1135 waste marble concrete entries were collected containing constituents such as the cement density (C), waste marble (WM), fine aggregate (FAg), coarse aggregate (CAg), water (W), superplasticizer (PL) and curing age (Age) used as input variables of the waste marble concrete model. The records were divided into training set (900 records = 80%) and validation set (235 records = 20%) following standard partitioning pattern reported in the literature. The kNN and AdaBoost, with SSE of 1408.5 MPa2 and 1397 MPa2 respectively and a tie Accuracy of 95.5% and R2 of 0.985 showed the best models suggesting excellent model performance while GMDH-NN showed the worst. Conversely, RF balances accuracy and model complexity, making it a practical alternative to kNN and AdaBoost. And lastly, Age, Coarse Aggregates, Water, and Plasticizer play the most significant roles in determining the compressive strength, while Cement, Waste Marble, and Fine Aggregates have comparatively smaller impacts. However, considering the standard proportion required for waste marble powder to replace cement, it showed a remarkable influence on the behavior of the concrete thus a recommended potential for its used as replacement for cement.
Some of the metrics are blocked by your
consent settings
Predicting the strengths of basalt fiber reinforced concrete mixed with fly ash using AML and Hoffman and Gardener techniques
(2025-12-01)
Onyelowe, Kennedy C.
;
Kamchoom, Viroon
;
Hanandeh, Shadi
;
Ebid, Ahmed M.
;
Llamuca Llamuca, José Luis
Basalt fiber-reinforced concrete (BFRC) mixed with fly ash, combined with advanced machine learning techniques, offers a practical, cost-effective, and less time-consuming alternative to traditional experimental methods. Conventional approaches to evaluating mechanical properties, such as compressive and splitting tensile strengths, typically require sophisticated equipment, meticulous sample preparation, and extended testing periods. These methods demand substantial financial resources, specialized labor, and considerable time for data collection and analysis. The integration of machine learning provides a transformative solution by enabling accurate prediction of concrete properties with minimal experimental data. The methods of data collection from literature and analysis were used and 121 records were collected from experimentally tested basalt fiber reinforced concrete samples measuring the compressive and splitting tensile strengths of the concrete. Eleven (11) critical factors have been considered as constituents of the studied concrete to predict the Fc-Compressive strength (MPa) and Fsp-Splitting tensile strength (MPa), which are the output parameters. The collected records were divided into training set (96 records = 80%) and validation set (25 records = 20%) following the requirements for data partitioning for sustainable machine learning application. Seven (7) selected machine learning techniques are applied in the prediction. Further, performance evaluation indices were used to compare the models’ abilities and lastly, the Hoffman and Gardener’s technique was used to evaluate the sensitivity of the parameters on the concrete strengths. At the end of the exercise, results were collated. In predicting the compressive strength (Fc), AdaBoost similarly excels, matching XGBoosting’s validation performance with R2 of 0.98 and the same MAE values. This shows the effectiveness of boosting techniques for predictive modeling in concrete strength estimation. For splitting tensile strength (Fsp), AdaBoost also outperforms most models, achieving an R2 of 0.96 for training and validation phases. Its exceptionally low validation MAE of 0.124 MPa underscores its excellent generalization capabilities. Overall, XGBoosting and AdaBoost consistently demonstrate superior performance for both compressive and splitting tensile strength predictions, followed closely by KNN. These models benefit from advanced ensemble techniques that efficiently handle non-linear patterns and noise. SVR also performs admirably, whereas GEP and GMDHNN exhibit weaker predictive capabilities due to limitations in handling complex data dynamics. For the sensitivity analysis, the Hoffman and Gardener’s method of sensitivity analysis proves instrumental in identifying key drivers of strength in fiber-reinforced concrete, guiding informed decision-making for material optimization and sustainable construction practices.
Some of the metrics are blocked by your
consent settings
Impact of lightweight clay aggregate with slag and biomedical waste ash on self-compacting concrete using machine learning approach
(2025-12-01)
Onyelowe, Kennedy C.
;
Kamchoom, Viroon
;
Hanandeh, Shadi
;
Ebid, Ahmed M.
;
Viñan Villagran, Janneth Alejandra
The self-compacting concrete (SCC) mixes were developed using lightweight expandable clay aggregate (LECA) as a partial substitute for coarse aggregate, ground granulated blast-furnace slag (GGBS) as a partial replacement for cement, and combusted bio-medical waste ash (BMWA) as a partial replacement for fine aggregate. The substitution levels for LECA, GGBS, and BMWA were set at 10%, 20%, and 30% of coarse aggregate, cement, and fine aggregate, respectively. M30-grade SCC mixes were designed with two different water-to-binder ratios—0.40 and 0.45—and their compressive strength (CS) was experimentally evaluated. The data entries from the above mix designs and experiments were collected in this research which deals with evaluating the impact of lightweight expandable clay aggregate, metallurgical slag, and combusted bio-medical waste ash on self-compacting concrete. An extensive literature search was used in this project and this produced a global representative database collected from literature. The collected 384 records were divided into training set (300 records = 80%) and validation set (84 records = 20%) in line with the requirements of a more reliable data partitioning. Six advanced machine learning methods such as the Artificial Neural Network (ANN), Support Vector Regression (SVR), K-Nearest Neighbors (KNN), eXtreme Gradient Boosting (XGB), Random Forest (RF), and Adaptive Boosting (AdaBoost) were used to model the concrete behavior. All models were created using “Orange Data Mining” software version 3.36. A combination of error metrics, efficiency metrics and determination/correlation metrics were used to test the models performance and accuracy. Also, the Hoffman and Gardener’s method was used to evaluate the sensitivity analysis of the model variables. At the end of the model work, AdaBoost and KNN excel in predictive accuracy with 97.5%, reducing the margin of error and ensuring precise mix designs for SCC. SVR, XGB, and RF also exhibit strong accuracy (96.5–97%), supporting reliable material selection and proportions. AdaBoost and KNN demonstrate the lowest errors (MAE: 0.65 MPa, RMSE: 0.75 MPa), indicating precise performance, minimizing overdesign or underperformance risks, and optimizing material usage. The Hoffman/Gardener’s sensitivity analysis produced produced GGBS of 31% and Dens of 26% as the highest impact and this is followed by LECA of 21% and BMWA of 20%. This research enables the optimization of self-compacting concrete mix designs using machine learning, reducing experimental trials, enhancing material efficiency, lowering environmental impact, and promoting sustainable construction through the effective reuse of industrial by-products.
Some of the metrics are blocked by your
consent settings
Data-driven framework for prediction of mechanical properties of waste glass aggregates concrete
(2025-12-01)
Onyelowe, Kennedy C.
;
Hanandeh, Shadi
;
Kamchoom, Viroon
;
Ebid, Ahmed M.
;
Imran, Hamza
This research presents a novel data-driven framework for predicting the mechanical properties of waste glass aggregate concrete using six advanced metaheuristic optimization algorithms: Bat Algorithm (Bat), Cuckoo Search Algorithm (Cuckoo), Elephant Herding Optimization (Elephant), Firefly Algorithm (Firefly), Rhinoceros Optimization Algorithm (Rhino), and Gray Wolf Optimizer (Wolf). The study evaluates these models based on their ability to predict compressive strength (Fc), tensile strength (Ft), density, and slump using key statistical performance indicators such as SSE, MAE, MSE, RMSE, accuracy, R2, and KGE. Sensitivity analysis was conducted using Hoffman and Gardener’s method as well as the SHAP technique to determine the most influential parameter in the prediction process. Results indicate that the Firefly and Wolf algorithms exhibited the highest prediction accuracy across all four properties, with Wolf emerging as the overall best-performing model due to its superior generalization ability, lower error rates, and high correlation with experimental results. Among the input parameters, the water-to-binder ratio was identified as the most influential factor affecting the mechanical properties of waste glass aggregate concrete, as demonstrated by both sensitivity analysis methods. This highlights the critical role of optimal water content in achieving desirable strength and workability in sustainable concrete mixtures. The study’s novelty lies in the comparative assessment of multiple optimization algorithms applied to waste-based concrete, an approach that has not been extensively explored in previous research. Additionally, the integration of SHAP analysis for feature importance ranking provides an interpretable machine learning approach to concrete mix design, which enhances decision-making for engineers and researchers. The practical implications of this research extend to sustainable machine learning-based concrete design, where AI-driven optimization can help reduce the reliance on conventional trial-and-error methods. By utilizing waste glass aggregates, the study supports circular economy initiatives in construction, reducing environmental impact while maintaining structural performance. The proposed models can be implemented in real-world scenarios to optimize mix designs for large-scale applications, leading to cost-effective and eco-friendly construction materials. This research advances the field of smart construction by demonstrating the effectiveness of machine learning in sustainable material engineering, paving the way for future AI-assisted innovations in the industry.
Some of the metrics are blocked by your
consent settings
Modeling suction of unsaturated granular soil treated with biochar in plant microbial fuel cell bioelectricity system
(2025-12-01)
Onyelowe, K. C.
;
Ebid, Ahmed M.
;
Ramos Jiménez, Rosa Belén
;
Kamchoom, Viroon
;
Vishnupriyan, M.
There is an initiative driven by the carbon-neutrality nature of biochar in recent times, where various countries across Europe and North America have introduced perks to encourage the production of biochar for construction purposes. This objective aligns with the zero greenhouse emission targets set by COP27 for 2050. This research work seeks to assess the effectiveness of biochar in soils with varying grain size distributions in enhancing the soil–water characteristic curve (SWCC). This work further explores the effect of different combinations of biochar content (0 to 15 mass %) on the bioelectricity generation from biochar-improved plant microbial fuel cells (BPMFC). Additionally, different machine learning models such as the “Gradient Boosting (GB)”, “CN2 Rule Induction (CN2)”, “Naive Bayes (NB)”, “Support vector machine (SVM), “Stochastic Gradient Descent (SGD)”, “K-Nearest Neighbors (KNN)”, “Tree Decision (Tree)”, “Random Forest (RF)”, and “Response Surface Methodology” (RSM), have been developed to predict SWCC based on soil suction, electric current, electrical potential, volumetric water content, temperature, and bulk density. The newly established model demonstrates a reasonable ability to predict SWCC and a cheaper technology in predicting the suction of unsaturated soils in relation to the studied bioelectric factors of the BPMFC. Overall, in this research paper, the GB, SVM and CN2 outclassed the other regression techniques in this order thereby proposing the cheapest technology with the highest performance index to predict the SWCC behavior of unsaturated soils in a BPMFC system.
Some of the metrics are blocked by your
consent settings
Optimizing the utilization of Metakaolin in pre-cured geopolymer concrete using ensemble and symbolic regressions
(2025-12-01)
Onyelowe, Kennedy C.
;
Kamchoom, Viroon
;
Ebid, Ahmed M.
;
Hanandeh, Shadi
;
Llamuca Llamuca, José Luis
The optimization of metakaolin (MK) in pre-cured geopolymer concrete involves developing predictive models to capture the interplay of various influencing factors and guide mix design for improved compressive strength and sustainability. Ensemble methods and symbolic regression are promising approaches for this task due to their complementary strengths and solving challenges associated with repeated experiments in the laboratory. Choosing machine learning predictions over repeated, expensive, and time-consuming experiments in research projects, such as optimizing the utilization of metakaolin in pre-cured geopolymer concrete, presents a paradigm shift in how data-driven insights can revolutionize material development. The integration of ensemble and symbolic regression models enables researchers to derive valuable predictions and optimize critical performance parameters efficiently. In this research work, 235 records were collected from extensive literature search for compressive strength for different mixing ratios of pre-cured metakaolin-based geopolymer concrete with concrete at different ages. Each record contains MK: The content of metakaolin (kg/m3), SHS: Sodium hydroxide solution content (kg/m3), SHSM: Sodium hydroxide solution molarity (Mole), SSS: Sodium silicate solution content (kg/m3), W: Extra water content (not including the water in alkaline solutions) (kg/m3), W/S: Water to Solid ratio (Total water content / Solid part of activator solutions + MK), Na<inf>2</inf>O/Al<inf>2</inf>O<inf>3</inf>: Sodium oxide to aluminium oxide ratio, SiO<inf>2</inf>/Al<inf>2</inf>O<inf>3</inf>: Silicon oxide to aluminium oxide ratio, H<inf>2</inf>O/Na<inf>2</inf>O: Water to Sodium oxide ratio, CA/FA: Coarse to Fine aggregate ratio, CAg: The content of coarse aggregates (kg/m3), SP: The content of super-plasticizer (kg/m3), PCC: 0 for no pre-curing, 1 for pre-curing at 60 °C, and 2 for pre-curing at 80 °C, CT: Curing temperature (°C), Age: The concrete age at testing (days) and CS: Compressive strength (MPa). The collected records were portioned into training set (180 records≈75%) and validation set (55 records≈ 25%) and modeled with ensemble and symbolic regression methods. At the end of the model work, performance metrics were used to evaluate the models’ ability and Hoffman and Gardener’s sensitivity analysis was used to evaluate the impact of the variables on the compressive strength of the pre-cured geopolymer concrete mixed with metakaolin. GB and KNN models became the decisive models with excellent performance which outclassed others and the sensitivity analysis indicated that SHSM, SSS, W/S, and Na<inf>2</inf>O/Al<inf>2</inf>O<inf>3</inf> are the most influential to the predicted compressive strength.

KMITL

Browse

Filters

Settings

Sort By

Results per page

Search Results