KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Eiamsa-ard, SmithSubject: search.filters.subject.Channel

Search Results

Now showing 1 - 3 of 3
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Influence of notched baffles on aerothermal performance behaviors in a channel
    (2023-07-01)
    Phila, Arnut
    ;
    Keaitnukul, Warin
    ;
    Eiamsa-ard, Smith
    ;
    Naphon, Paisarn
    ;
    Maruyama, Naoki
    The proper designs of modified heat transfer surfaces or turbulence enhancement inserts for heat transfer augmentation are extremely important for improving overall aerothermal performances relating to the energy-saving capabilities of thermal systems. A major challenge is to control friction loss as little as possible while maintaining reasonable heat transfer enhancement. Transverse baffles with rectangular notches or notched baffles (NBs) were applied for improving aerothermal performance in a channel with a constant aspect ratio of 3.75 while notch height-to-baffle height ratio (a/e) ranged from 0.125 to 0.5. Reynolds number ranged from 6000 to 24,000, in experiments. Heat transfer enhancement, pressure loss, and aerothermal performance in a rectangular channel with notched baffles were examined. Compared to the solid transverse baffle (SB, a/e = 0), the NBs with a/e = 0.125 increased the heat transfer rate while lessening the pressure loss, as shown by the experimental findings. Obviously, Nusselt number, friction factor and aerothermal performance increased as the a/e ratio decreased. The NBs with the smallest notch height-to-baffle height ratio (a/e = 0.125) exhibited the highest aerothermal performance of 1.17, which can be attributed to the efficient heat transfer enhancement by the strong multi-jet impingements and the moderate friction loss penalty resulting from the presence of notches (spaces) on the baffles.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Thermal evaluation of flow channels with perforated-baffles
    (2023-05-01)
    Eiamsa-ard, Smith
    ;
    Phila, Arnut
    ;
    Wongcharee, Khwanchit
    ;
    Pimsarn, Monsak
    ;
    Maruyama, Naoki
    The influences of perforated-baffles on the local Nusselt number (Nu) and thermo-hydraulic behaviors were comprehensively studied using thermochromic liquid crystal sheet. The perforated-baffles were designed in two forms: perforated-baffle (PB) and perforated-baffle with square wings (SW-PBs). Transverse solid baffles (TBs) were also tested for an assessment. All baffles had an identical height of 12 mm (e/H = 0.3). Experimental results showed that SW-PBs offered better Nu than PBs. It is also seen that PBs and SW-PBs caused lower pressure loss than TBs by around 20.49% and 13.98%, respectively. The reduction of friction loss was primarily due to the baffle perforation. In addition, the PBs yielded the thermal performance factors (TPF) up to 1.01 at the lowest Reynolds number of 6000.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Numerical study on heat transfer of turbulent channel flow over periodic grooves
    (2008-08-01)
    Eiamsa-ard, Smith
    ;
    Promvonge, Pongjet
    A numerical investigation of turbulent forced convection in a two-dimensional channel with periodic transverse grooves on the lower channel wall is conducted. The lower wall is subjected to a uniform heat flux condition while the upper wall is insulated. To investigate turbulence model effects, computations based on a finite volume method, are carried out by utilizing four turbulence models: the standard k - ε, the Renormalized Group (RNG) k - ε, the standard k - ω, and the shear stress transport (SST) k - ω turbulence models. Parametric runs are made for Reynolds numbers ranging from 6000 to 18,000 with the groove-width to channel-height ratio (B/H) of 0.5 to 1.75 while the groove pitch ratio of 2 and the depth ratio of 0.5 are fixed throughout. The predicted results from using several turbulence models reveal that the RNG and the k - ε turbulence models generally provide better agreement with available measurements than others. Therefore, the k - ε model is selected to use in prediction of this complex flow. In addition, the results of the heat transfer coefficient, friction factor, skin friction coefficient and thermal enhancement factor are also examined. It is found that the grooved channel provides a considerable increase in heat transfer at about 158% over the smooth channel and a maximum gain of 1.33 on thermal performance factor is obtained for the case of B/H = 0.75. This indicates that the reverse/re-circulation flow in a channel with transverse grooves can improve the heat transfer rate. © 2008 Elsevier Ltd. All rights reserved.