KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Hirota, MasafumiSubject: search.filters.subject.Solar air heater

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Thermal performance augmentation in a solar air heater with twisted multiple V–baffles
    (2024-11-01)
    Chompookham, Teerapat
    ;
    Eiamsa-ard, Smith
    ;
    Buanak, Kalong
    ;
    Promvonge, Pongjet
    ;
    Maruyama, Naoki
    A 3D numerical investigation of thermal performance augmentation of a twisted multiple V–baffles in a solar air heater is presented. Two important functions of the twisted multiple V–baffles are to generate multiple impinging flows upon the wall to improve the convective heat transfer (compared with a smooth channel) and reduce the pressure drop (compared with a typical multiple V–baffles). These outcomes enhance thermal performance. The results of heat transfer (in terms of a Nusselt number ratio), pressure drop (in terms of a friction factor ratio) and thermal performance (in terms of a thermal enhancement factor) of a twisted multiple V–baffles were compared with both a smooth channel and a typical multiple V–baffles. Eighty–one cases including those with a pitch ratio of PR = 0.4–2.0; blockage ratio, BR = 0.10–0.20; angle of attack, α = 30<sup>o</sup> – 60<sup>o</sup> and a fixed number of twisted loops, n = 2, were investigated in turbulent flow. The results revealed that the twisted multiple V–baffles created multiple impinging jets at the heated wall and help accelerate heat transfer between the wall and the fluid. Compared to a typical multiple V–baffles, the friction factor showed a large decrease while the Nusselt number was slightly lower leading to better thermal performance. Over the study range, PR = 0.4, BR = 0.20, and α = 60<sup>o</sup> appeared to yield the highest thermal enhancement factor, 2.81 at Re = 3000.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Effect of arc-shaped twisted-baffles on augmented heat transfer in a rectangular duct
    (2023-02-01)
    Promvonge, Pongjet
    ;
    Phila, Arnut
    ;
    Chuwattanakul, Varesa
    ;
    Chokphoemphun, Suriya
    ;
    Eiamsa-Ard, Smith
    In this current work, the effect of utilizing arc-shaped twisted-baffles (T-ABs) in a rectangular air channel on thermal performance factor (TPF) has been experimentally studied. In these experiments, the influence of the changes in parameters such as dimensions of pitch ratio (p/w), attached arc-shape angle (α), and Reynolds number (Re) are explored. The comparisons demonstrate that a channel mounted with arc-shaped twisted-baffles yielded considerably greater Nusselt numbers than a smooth channel, possibly attributable to multiple-impinging jets near the channel surface. Heat transfer enhancements of twisted arc-shaped baffles (T-AB) having larger attack angles were superior to those having smaller attack angles. The one with α = 90o offered greater heat transfer rates than the ones with α = 20o, 40o, 60o, and 80o by approximately 8%, 7%, 4%, and 2%, respectively. The superior heat transfer was attributed to the better contact between the working fluid and heat transfer surfaces. In addition, utilizing arc-shaped twisted-baffles with the lowest p/w of 4.0, in a channel produced stronger vortices and multiple impinging jets, which caused better fluid mixing than other p/w. The optimum condition is achieved using T-ABs at an attached arc-shape angle of α = 90o, p/w = 4.0 and Re = 4000, where the heat transfer rate (Nu), friction factor (f) and TPF are found to be, respectively, 3.31, 4.68 and 1.98 times greater than those of a plain channel.