KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Hussain, QudeerSubject: search.filters.subject.Calcium carbonate

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Development of self-compacting mortar incorporating calcium carbonate and waste garnet: Workability, strength, and fire durability assessment
    (2026-06-01)
    Chatveera, Burachat
    ;
    Ejaz, Ali
    ;
    Chintanapakdee, Chatpan
    ;
    Saingam, Panumas
    ;
    Hussain, Qudeer
    The excessive consumption of natural sand and cement in mortar production raises environmental concerns, underscoring the need for sustainable alternatives. While the separate use of cementitious and fine aggregate substitutes has been studied, their combined effects in self-compacting mortar (SCM) remain underexplored. This study addresses this gap by investigating SCM mixes incorporating calcium carbonate (CaCO₃) as a partial cement substitute (0–20%) and waste garnet (0–100%) as a fine aggregate replacement. A total of 18 mixes were evaluated for their fresh properties, mechanical performance, durability, and residual properties after elevated-temperature exposure. The results showed that the mix with 10% CaCO₃ and 60% waste garnet exhibited the best overall performance, achieving approximately 66 MPa compressive strength and 8.1 MPa flexural strength at 90 days, representing up to a 15% improvement over the control. Water absorption was reduced to 2.42% at 90 days, while improved resistance under acidic conditions was observed, with only 7.71% mass loss after 180 days of exposure to 5% H₂SO₄ solution. Furthermore, the optimized mix retained over 65% of its compressive strength after exposure to 600 °C, indicating good residual mechanical performance at elevated temperatures. Microstructural analysis revealed a dense and cohesive matrix with a refined pore structure. These findings suggest that the combined use of CaCO₃ and waste garnet can provide a potentially eco-efficient approach for producing high-performance SCM. The improved workability, strength, and durability indicate potential suitability for applications such as repair mortars and precast elements, where both flowability and long-term performance are required.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Effect of para-wood ash and calcium carbonate on the properties of eco-friendly self-compacting mortar reinforced with electronic waste fibers
    (2024-10-15)
    Makul, Natt
    ;
    Hussain, Qudeer
    ;
    Nawaz, Adnan
    ;
    Saingam, Panumas
    ;
    Sua-iam, Gritsada
    This paper deals with reducing CO<inf>2</inf> emissions from cement production and finding alternative uses for electronic waste (E-waste) fibers in some innovative applications in self-compacting mortar (SCM). In the present research, an attempt has been made to establish the optimum incorporation of E-waste fiber into SCM by varying the fiber content from 5 % to 25 %, combined with para-wood ash and calcium carbonate as supplementary cementitious materials. In this laboratory study, the mix design had a constant water-to-powder ratio of 0.35 and a cement content of 550 kg/m³. Additionally, 20 % of the cement volume was replaced by 10 % para-wood ash and 10 % calcium carbonate. The results indicated a continuous increase of the mini-slump values from 255 mm for the control mix to 270 mm for the mix with the highest fiber content. Mini V-funnel flow times increased from 3.63 to 8.83 s as the fiber content increased. Lower fiber contents of 5 % improved compressive strength because they had a reinforcing role in the matrix of SCM besides the microcrack-bridging role. Higher contents of 10–25 % decreased the strength due to the clustering of fibers and resulting voids. SEM analysis at 28 days showed increased voids with higher percentages of E-waste fibers and para-wood ash alone. The results underline that optimizing fiber content is critical in balancing workability and mechanical properties, and 5 % e-waste fiber content can be considered optimal for enhancing the performance of SCM. This work also creates part of sustainable construction practice with the green solution required to reduce CO<inf>2</inf> emissions and work accumulation against E-waste.