KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Kittikhuntharadol, YannapholSubject: search.filters.subject.nanofluids

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Dielectric Properties of Natural Ester Mixed with Nanoparticles under Thermal Stress
    (2020-10-25)
    Kittikhuntharadol, Yannaphol
    ;
    Vittayakorn, Wanwilai
    ;
    Pattanadech, Norasage
    This paper aim to study of the dielectric properties of thermal stressed natural ester mixed with TiO2, and ZnO. Polarization and depolarization current (PDC) along with dielectric loss factor (tanδ) of the test specimens were investigated. The test specimens comprised of unmodified natural ester and natural ester mixed with different volume concentration, i.e., 0.01%, and 0.03% of TiO2, and ZnO. After preparing the natural ester and the natural ester nanofluid specimen, such specimens were undergone with thermal stress at 110 degree Celsius for 72 hours in vacuum oven. Then, a PDC-Analyser-1MOD was utilized for PDC measurement of the test samples. For tanδ measurement, test circuit was set-up according to IEC 60247 and the C and tanδ meter with the liquid electrode were used. From the test result, thermal stress strongly affects the PDC and tanδ characteristics of the liquid samples. Besides, natural ester mixed with 0.01% of TiO2 concentration shows the high potential dielectric liquids compared with other specimens.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    AC Breakdown and Resistivity of Natural Ester Based Nanofluids
    (2020-10-25)
    Maneerat, Noppadol
    ;
    Makmork, Kawee
    ;
    Kittikhuntharadol, Yannaphol
    ;
    Suksai, Nattapat
    ;
    Chusang, Thanapat
    In this paper, AC breakdown including resistivity of natural ester and natural ester mixed with nanoparticles were studied. Two types of nanoparticles i.e. Barium titanate (BaTiO3) and Titanium dioxide (TiO2) which have their diameter less than 100 nm were used in experiment. For the nanofluid samples, three concentration of nanoparticles including 0.01%, 0.03% and 0.05% were prepared in five processes. Firstly, the natural ester mixed was with 0.01%, 0.03% and 0.05% of volume fraction of nanoparticles. Second, a magnetic stirrer was used to diffuse them evenly over the liquid later, ultrasonic dispersion was also used to ensure that the prepared nanofluids were homogeneous. Then, the nanofluid liquid was heated at 80 degree Celsius in vacuum oven for 15 hours. Finally, this liquid was dispersed by using magnetic stirrer again. Besides, the mixed liquid sample was heated at 110, and 130 degree Celsius for 72 hours to simulated thermal stress. To measure the AC breakdown voltage, a dielectric breakdown testing device was used. The test circuit was set up according to ASTM D1816. The gap distance between electrode was set at 2.0 mm. Furthermore, the test cell for liquid insulation testing (Model DAC-OBE-2: SOKEN) was used for polarization and depolarization current (PDC) experiment. The PDC test result was then used to calculated the resistivity of the liquid samples. The test results show that the AC breakdown voltages of the natural ester mixed with nanoparticles is higher than unmodified natural ester. Additionally, Barium titanate nanoparticles and Titanium dioxide nanoparticles enhance the breakdown strength and the resistivity of the ester nanofluid tested. According to the results, it concluded that nanoparticles were an good alternative to enhance the dielectric properties of natural ester for dielectric application.