KMITL
Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1
Browse
4 results
Search Results
- Some of the metrics are blocked by yourconsent settings
Item type:Item, Broadband Two-Array Metasurface-Gridded MIMO Antenna with Dual-CP Bi-Directional Capabilities(2025-01-01) ;Supreeyatitikul, Nathapat ;Kakhong, Khwanlada ;Prasong, Pusit ;Phongcharoenpanich, ChuwongKonpang, JessadaThis study presents a novel two-array MTS-gridded MIMO antenna with dual circular polarization (CP) bidirectional capabilities for full-duplex communications. The proposed antenna consists of two mirrored clusters, each comprising a single-element antenna formed by a 3 × 4 MTS-gridded element array, a circular patch, and a ground plane. The antenna demonstrates a wide measured return loss bandwidth (RLBW) of 56.46% (5 - 8.67 GHz), axial ratio bandwidth (ARBW) of 18.15% (6.26 - 7.44 GHz), and strong isolation below -22 dB. Peak gains of 6.5 dBic and 6.55 dBic were observed at 6.6 GHz and 6.54 GHz for Ports 1 and 2, respectively. Furthermore, the low envelope correlation coefficient (< 0.005) and high diversity gain (> 9.985 dB) validate its effectiveness for multi-port applications. The bidirectional radiation pattern and dual circular polarization support simultaneous transmission and reception, making the design well-suited for full-duplex MIMO operation. - Some of the metrics are blocked by yourconsent settings
Item type:Item, Two-Port Circularly Polarized Slot-Coupled Antenna Using Novel AMC Structure(2025-01-01) ;Supreeyatitikul, Nathapat ;Kakhong, Khwanlada ;Phongcharoenpanich, ChuwongKonpang, JessadaThis research introduces a two-port circularly polarized (CP) slot-coupled MIMO antenna with an novel artificial magnetic conductor (AMC) reflector for Vehicle-to-Everything (V2X) technology. The proposed antenna comprises two layers separated by an air gap: the upper layer includes the dual-element slot-integrated MIMO antenna with microstrip-line feeds and defected ground structures (I-shaped slots) for coupling reduction, while the lower layer integrates an 8 × 8 array of AMC units. The AMC enhances gain and improves radiation properties through its reflective behavior. Measured results confirm the antenna's suitability for V2X applications, achieving a wide return loss bandwidth (RLBW) of 32% (4.72 - 6.61 GHz), axial ratio bandwidth (ARBW) of 21.18% (5.2 - 6.45 GHz), and isolation greater than 19 dB. The antenna attains a peak gain of 8.6 dBic at 5.9 GHz, with an envelope correlation coefficient below 0.003 and diversity gain exceeding 9.98 dB. The key innovation of this work lies in the combination of CP slot-integrated MIMO design with a novel AMC structure to enhance gain and isolation, making it highly effective for V2X wireless networks in modern vehicular communication networks. - Some of the metrics are blocked by yourconsent settings
Item type:Item, Broadband unidirectional twin-element MIMO antenna scheme for mid-band 5G and WLAN laptops(2024-12-01) ;Luadang, Bancha ;Janpangngern, Pisit ;Pookkapund, Khanet ;Dentri, SitthichaiKrairiksh, MonaiThis research proposes a broadband unidirectional twin-element multiple-input-multiple-output (MIMO) antenna scheme for mid-band 5G and WLAN applications. The twin-element antenna scheme comprises two single-element antennas, and each single-element antenna consists of a T-shaped hemispherical feeding patch, left- and right-arm radiating patches, and a conjoined triangular ground plane. The twin-element MIMO antenna scheme is integrated with a laptop model functioning as the reflector. The measured impedance bandwidth (|S<inf>11</inf>|, |S<inf>22</inf>|≤ − 6 dB) are 55.32%, covering 3.4–6.0 GHz, and the measured mutual coupling (|S<inf>12</inf>|) is less than − 15 dB. The measured gain at the center frequency (4.5 GHz) is 4.585 dBi. Besides, the measured xz- and yz-plane cross-polarization levels are below − 25 dB and − 15 dB, respectively. The half-power beamwidth (HPBW) in the xz-plane at 3.5, 4.5, and 5.5 GHz are 99°, 92.8°, and 84.2°, and the corresponding HPBW in the yz-plane are 102°, 78°, and 102°. The measured xz- and yz-plane back lobe levels are below − 15 dB across the entire operating frequency band (3.5–5.5 GHz). The radiation pattern of the twin-element MIMO antenna scheme is of unidirectionality. Furthermore, the envelope correlation coefficient and diversity gain of the twin-element antenna scheme are < 0.001 and > 9.99 dB, respectively. The proposed broadband unidirectional twin-element MIMO antenna scheme is thus operationally suitable for mid-band 5G/WLAN communication systems. Essentially, this research is the first to propose a broadband twin-element MIMO antenna scheme for mid-band 5G/WLAN applications. - Some of the metrics are blocked by yourconsent settings
Item type:Item, Metasurface-based Circularly Polarized Dual-Port MIMO Antenna for C-band Uplink Applications(2022-01-01) ;Supreeyatitikul, Nathapat ;Boonpoonga, AkkaratPhongcharoenpanich, ChuwongThe rectangular-shaped metasurface (MTS)- based circularly polarized (CP) dual-port MIMO antenna was proposed. The proposed rectangular-shaped MTS-based CP dual-port MIMO antenna included two substrate layers (upper and lower). The periodic 4×4 rectangular-shaped MTS elements on the upper layer functioned as CP polarizers. Also, the lower substrate layer comprised the microstrip probe feed and ground plane which generated a linearly polarized (LP) wave. The proposed rectangular-shaped MTS-based CP dual-port MIMO antenna at 5.3 GHz achieved impedance bandwidth (IBW) of 30.9% (4.86 - 6.5 GHz) and axial ratio (ARBW) of 14% (5.16 - 5.9 GHz). The maximum gain was 7.3 dBi at 5.1 GHz. The ECC was lower than 0.002, and DG was greater than 9.98 dB between entire frequency ranges. The direction of the radiation was right-hand circular polarization (RHCP). The dimension of proposed rectangular-shaped MTS-based CP dual-port MIMO antenna was 1.342λ0 × 0.652λ0 × 0.0372λ0.
