KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Author: search.filters.author.Pratontep, SirapatSubject: search.filters.subject.Dichloromethane

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Hybrid gas sensor based on platinum nanoparticles/poly(methyl methacrylate)-coated single-walled carbon nanotubes for dichloromethane detection with a high response magnitude
    (2016-05-01)
    Muangrat, Worawut
    ;
    Yordsri, Visittapong
    ;
    Maolanon, Rungroj
    ;
    Pratontep, Sirapat
    ;
    Porntheeraphat, Supanit
    A dichloromethane (DCM) sensor with a high response magnitude was successfully fabricated using the integration of single-walled carbon nanotubes (SWNTs), poly(methyl methacrylate) (PMMA) and platinum nanoparticles (Pt NPs). A pristine SWNT network was first formed by drop-casting onto printed circuit board (PCB) substrates. Next, PMMA was coated onto the pre-dropped SWNT network by spin coating using a PMMA-toluene solution, followed by the deposition of Pt NPs by electron-beam evaporation (hereafter referred to as Pt/PMMA/SWNT). The Pt/PMMA/SWNT enabled an approximately 69-fold improvement in DCM detection compared to pristine SWNT. The high response magnitude of the Pt/PMMA/SWNT was successfully achieved because of the incorporation of PMMA and Pt functions. Swelling of the PMMA matrix as a result of DCM adsorption leads to PMMA volume expansion, thereby increasing the SWNT-SWNT distance, which results in an increase in the resistance. Pt NPs promote the dissociation of DCM to CO, and consequently the CO oxidation on the Pt NPs catalyst and electron donation from Pt NPs to SWNTs, resulting in an increase in the resistance. Moreover, a linear relationship was obtained between the sensor response of the Pt/PMMA/SWNT and the concentration of DCM. These results suggest that the integration of SWNTs with PMMA and Pt NPs is a promising approach for improving DCM detection at room temperature.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Polymer-coated single-walled carbon nanotubes for ethanol and dichloromethane discrimination
    (2013-10-29)
    Muangrat, Worawut
    ;
    Maolanon, Rungroj
    ;
    Pratontep, Sirapat
    ;
    Porntheeraphat, Supanit
    ;
    Wongwiriyapan, Winadda
    Sensor response and pattern recognition of polymer-coated single-walled carbon nanotubes (SWNTs) were investigated. Printed circuit board (PCB) with Cu/Au interdigitated electrode was used as sensor platform. SWNTs network was firstly formed on PCB by drop-casting. For polymer-coated SWNTs preparation, poly(methyl methacrylate) (PMMA) and thiophene were employed as polymers to coat on SWNTs by spin coating; PMMA/SWNTs and thiophene/SWNTs. Raman spectra showed no obvious structure changes of SWNTs after polymer coating. Next, gas sensing test was conducted. Pristine SWNTs, PMMA/SWNTs and thiophene/SWNTs were exposed to vapors of ethanol and dichloromethane at room temperature. From normalized sensor response results, it was found that pristine SWNTs and PMMA/SWNTs showed the highest response to ethanol and dichloromethane vapors, respectively. In order to discriminate vapors between ethanol and dichloromethane, pattern recognition technique was utilized. Principal component analysis (PCA) results showed that pattern recognition of ethanol and dichloromethane vapors can be discriminated by using pristine SWNTs and polymer-coated SWNTs sensors. © (2013) Trans Tech Publications, Switzerland.