KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Settings

Subject: search.filters.subject.Ductility

Search Results

Now showing 1 - 3 of 3
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Experimental evaluation of sustainable jute–basalt hybrid FRP systems for flexural strengthening of RC beams with variable wrapping and light-weight aggregate replacement
    (2026-12-01)
    Saingam, Panumas
    ;
    Hanif, Muhammad Adnan
    ;
    Ahmed, Fahad
    ;
    Chatveera, Burachat
    ;
    Sua-iam, Gritsada
    This research experimentally assesses the flexural strengthening of reinforced concrete (RC) beams through the use of sustainable jute–basalt (JB) hybrid fiber-reinforced polymer (FRP) systems with variable wrapping schemes and lightweight aggregate (LWA) replacement. A total of 18 beams with identical geometry and reinforcement were tested under four-point bending, including controls, basalt FRP (BFRP), jute FRP (JFRP), and hybrid JB FRP systems in bottom-only, U-wrap, and full-wrap configurations. The results indicate that FRP confinement significantly modified failure modes, transitioning from the brittle crushing in controls to rupture- or debonding-controlled mechanisms. BFRP significantly enhanced strength, achieving up to 36.8% greater capacity in full-wrap beams, while JFRP improved ductility but was more prone to premature debonding. Hybrid JB FRP systems demonstrated the most balanced performance, with U-wrap hybrids achieving 39.6% higher load capacity and maintaining significant deformation capacity even in LWA concrete. Load–strain responses confirmed yielding of steel reinforcement in all cases, though maximum strains were reduced after confinement due to premature fiber debonding or rupture at smaller deflections. The use of LWA reduced ductility of control beams, but hybrid U-wrap systems successfully compensated for this limitation, providing the highest load and deflection values among all specimens. These results emphasize the potential of hybrid natural–mineral FRP systems as sustainable alternatives to synthetic composites, providing competitive ductility and reinforcement for structural retrofitting applications in both conventional and lightweight concretes.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Axial compressive performance of sustainable BFRP-confined rectangular columns using recycled brick aggregates
    (2025-10-01)
    Suthumma, Chisanuphong
    ;
    Ejaz, Ali
    ;
    Iqbal, Muhammad Jawed
    ;
    Yooprasertchai, Ekkachai
    ;
    Hussain, Qudeer
    This study examines the mechanical behavior of basalt FRP confined rectangular concrete columns using crushed brick aggregates, addressing a research gap. While previous work focused on circular and square columns, this is the first to explore rectangular ones. The use of waste brick aggregates promotes sustainability. The study aims to assess the mechanical properties, expecting improvements in strength and ductility, and could lead to broader applications of basalt FRP. A total of 32 rectangular specimens were tested to evaluate the influence of aggregate type, concrete grade, and number of BFRP layers (0, 2, 4, and 6) on axial compressive performance. Results showed that BFRP confinement significantly enhanced strength and ductility, with maximum gains of 81% in strength and 230% in strain observed in low-strength natural aggregate concrete. Although recycled brick aggregate concrete (RBAC) exhibited lower stiffness, BFRP still provided up to 23% strength improvement. The effectiveness of confinement reduced with increasing unconfined strength. Post-peak analysis revealed that additional BFRP layers delayed stiffness degradation, promoting more ductile failure. Experimental elastic modulus closely matched ACI predictions in natural aggregate (NA) specimens but was overestimated in RBAC due to its higher porosity. The findings demonstrate the viability of BFRP confinement for enhancing the structural performance of sustainable concrete, while emphasizing the need for aggregate-specific design considerations. Design-oriented modelling was adopted to predict the complete stress-strain response of BFRP-confined concrete incorporating both natural and recycled brick coarse aggregates. A two-branch idealization of the compressive response was performed. Several key points were identified and predicted by using nonlinear regression analysis. The proposed approach closely predicted the response of BFRP-confined concrete.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Enhancing compressive behavior of concrete with novel low-cost hybrid passive confinement including large rupture strain cotton ropes: Experimental findings and a design-oriented model
    (2024-12-01)
    Saingam, Panumas
    ;
    Hussain, Qudeer
    ;
    Ejaz, Ali
    ;
    Nawaz, Adnan
    ;
    Joklad, Panuwat
    Recent research have highlighted the potential of hybrid confinement, combining high tensile strength fiber-reinforced polymers with large rupture strain confinement. This study presents experimental findings on 64 cylindrical and square-shaped specimens tested under axial compression, introducing a novel hybrid confinement method utilizing low-cost fiberglass chopped strand mat sheets and cotton ropes (COFS confinement). The experimental and analytical results yielded several key conclusions. Firstly, circular specimens exhibited significant peak strength increases in various subgroups, with enhancements ranging from 97.5 % to 285.5 %, and ultimate strain improvements ranging from 588.6 % to 1650.0 %. Similarly, square specimens under COFS confinement also demonstrated notable enhancements in ultimate strength and strain, with increases up to 244.7 % and 1083.0 %, respectively, particularly evident with higher levels of confinement. The influence of cross-sectional shape on compressive strength, strain, and energy dissipation was noted, with COFS confinement notably improving these factors for circular sections. Additionally, the study found that as the unconfined compressive strength increased, the enhancement in compressive strength, ultimate strain, and energy dissipation decreased. Moreover, the confinement ratio positively affected axial behavior improvement, with a proportional enhancement observed. However, the efficacy of the confinement ratio was influenced by cross-section type and plain concrete strength, emphasizing the need for considering these factors in COFS-based confinement design. Lastly, an analytical design-oriented model proposed for approximating stress vs. strain curves of COFS-confined concrete showed close agreement with experimental results, providing valuable insights for future design considerations.