KMITL

Permanent URI for this communityhttps://dspace.kmitl.ac.th/handle/123456789/1

Browse

Filters

20212

Settings

Subject: search.filters.subject.MMAD

Search Results

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Effect of wood vinegar substitutes on acetic acid for coagulating natural para rubber sheets during the drying process
    (2021-09-01)
    Kalasee, Wachara
    ;
    Dangwilailux, Panya
    The coagulating properties of wood vinegar from para rubber wood, bamboo, and coconut shell used as a substitute for acetic acid in the production process of natural rubber (NR) sheets were investigated and considered. For the dirt and volatile content, the tensile strength at break, the percentage of elongation at break, and the 300% modulus, the results showed that the types of wood vinegar coagulants were not significantly different from acetic acid. However, the Mooney viscosity and plasticity retention index (PRI) properties were significantly different from those of acetic acid. The NR sheet temperature increased rapidly during the first hour after the drying process started due to heat transfer from the hot air. Afterward, the temperature of the NR sheet samples began to stabilize. When the drying process started, the drying temperature was increased, so the trend was reducing the drying time. For the yellowness index (YI) value, the increase in the YI value was related to the type of coagulating material, the increase in the airspeed, and the drying temperature. The dried sheet samples using para rubber wood vinegar as the coagulating material had a color value at the same level as acetic acid and the referent. However, the bamboo and coconut shell wood vinegars were at a lower level. In comparing the YI value data between the experimental results and prediction values, the second-degree model had a better fit in prediction than the zero-degree and first-degree models. This result was confirmed by the higher mean of the coefficient of determination. The dried sheet product coagulated by using wood vinegar had fungus growth prior to supplying it to the customer.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Item,
    Prediction of size distribution and mass concentration of smoke particles on moisture content and combustion period from para rubber wood burning
    (2021-06-02)
    Kalasee, Wachara
    ;
    Dangwilailux, Panya
    The size distribution and total particle mass concentration (TPMC) of smoke particles from para rubber wood (Hevea brasiliensis) combustion in the ribbed smoked sheet (RSS) process were studied. In this experiment, temperature data values of para rubber wood combustion were recorded at 500 mm above the base of the fire by K-type thermocouples. The wood moisture content and wood combustion period were used to find and improve an equation of smoke particle size distribution (SPSD) and TPMC by the response surface method (RSM). An eight-stage Andersen air sampler and a high-volume sampler were used to measure and calculate SPSD and TPMC, respectively. Resulting data in this experiment showed that TPMC ranged from 3.12 to 77.42 mg/m<sup>3</sup> . SPSD was single mode in which MMAD, mass median aerodynamic diameter, ranged from 0.64 to 1.27 microns for para wood with moisture content ranging from 31.5 to 89.7% dry weight basis. The combustion period and moisture content of para wood have a direct effect on the change of temperature data above the base of the fire and the TPMC and MMAD values. For predicting TPMC and MMAD values by the para wood moisture contents in each combustion period, the results found that the second-degree model was a better plot than the first-degree model, confirmed by higher values of the coefficient of determination (R<sup>2</sup> ).