Jirakittidul, Kittimon

Loading...
Thumbnail Image
Preferred name
Jirakittidul, Kittimon
Main Affiliation
Email
kittimon.ji@kmitl.ac.th

Settings

Now showing 1 - 2 of 2
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Selective dispersion of multi-walled carbon nanotubes in segmented polyurethane with different melt mixing process
    (2017-01-01)
    Jirakittidul, Kittimon
    ;
    Khrongsakun, Krittaya
    ;
    Khongkhaw, Kannika
    ;
    Nernplod, Kusuman
    Polyurethanes (PU) have been widely used in many applications since their properties can be tailored as desire. In order to improve their electrical property, PU is incorporated with multi-walled carbon nanotubes (MWCNT). The effects of different mixing times and temperatures on selective dispersion of MWCNT in segmented PU were studied. Furthermore, segmented PU based on two different soft segments; i.e. polyester (PU-ester) and polyether (PU-ether), were used. PU/MWCNT nanocomposites were prepared by an internal mixer for 4-12 minutes at 190-210°C. FESEM, DSC and LCR meter were used to characterize morphology and thermal properties. It was found that MWCNT were dispersed in soft segment of PU-ether. Good MWCNT dispersion was able to achieve at high temperature with short mixing time or low temperature with long mixing time. On the other hand, PU-ester/MWCNT nanocomposites, MWCNT preferred to disperse in hard segment and could be dispersed well in PU-ester at low mixing temperature.
  • Loading...
    Thumbnail Image
    Some of the metrics are blocked by your 
    consent settings
    Item type:Publication,
    Acid modified multiwalled carbon nanotubes condition by reflux
    (2019-09-25)
    Jirakittidul, Kittimon
    ;
    Vittayakorn, Naratip
    ;
    Manrean, Rawijee
    ;
    Pornteeranawapat, Natchanun
    ;
    Neamyooyong, Saichon
    Nanomaterials, especially carbon nanotubes (CNTs), show excellent combinations of thermal, mechanical and electrical properties. However, as-produced CNTs are entangled and form agglomerates, due to their several micron lengths. Therefore, the dispersion efficiency of CNTs is limited. We decreased the length and improved dispersion with acid modified multiwall-CNTs (A-MWCNTs) formed by a reflux method. MWCNTs were modified with an acid mixture of sulfuric acid and nitric acid at the ratio of 3:1 by volume. The reflux temperature and time were varied between 80 to 120 °C and 10 to 30 min. FTIR found an increase in carboxylic acid groups on the surfaces with increasing reflux temperature and time. Therefore, A-MWCNTs showed good dispersion in polar solvents; i.e. water, DMF and DMAc. Furthermore, A-MWNCT lengths were shortened with increased reflux temperature and time. Carboxylic acid groups on A-MWCNT surfaces decreased the electrical conductivity by two orders of magnitude. However, epoxy resin in which the A-MWCNTs, modified at 120 °C and 30 min were encapsulated, showed better conductivity, since the shortest MWCNT lengths and the carboxylic groups on the A-MWCNT surfaces allowed good dispersion in epoxy resin.