Saingam, Panumas

Now showing 1 - 3 of 3

Some of the metrics are blocked by your
consent settings
Development of stress-strain models for glass fiber reinforced polymer composites confined sustainable concrete made with natural and recycled aggregates
(2024-02-16)
Yooprasertchai, Ekkachai
;
Saingam, Panumas
;
Hussain, Qudeer
;
Khan, Kaffayatullah
;
Ejaz, Ali
This study addresses the mechanical limitations of concrete fabricated with recycled brick and concrete as partial replacement of coarse aggregates, which exhibit inferior strength and stiffness compared to those with natural aggregates. To rectify this, a cost-effective approach involving low-cost glass fiber-reinforced polymer composites (LOC-GFRP) is proposed. The key parameters considered were the plain concrete compressive strength and the quantity of LOC-GFRP layers. The compressive strength of LOC-GFRP-confined concrete increased with the number of layers, with greater improvements observed in lower-strength plain concrete. Moreover, the improvement in ultimate strain was more significant than the improvement in compressive strength. The compressive strength and ultimate strain were improved by 271% and 478%, respectively. LOC-GFRP confinement resulted in a bilinear compressive stress vs. strain response, showcasing increased ductility and strength with more LOC-GFRP layers. The study evaluated various existing analytical expressions for fiber-reinforced polymers but found them inadequate in predicting parameters accurately. As a result, nonlinear regression analysis was carried out to propose expressions for predicting compressive strength and ultimate strain of LOC-GFRP-confined concrete for different aggregate types. The calculated coefficient of determination values ≥ 0.90 confirmed the good correlation among experimental and predicted values.
Some of the metrics are blocked by your
consent settings
Development of stress-strain models for concrete columns externally strengthened with steel clamps
(2023-05-09)
Yooprasertchai, Ekkachai
;
Ejaz, Ali
;
Saingam, Panumas
;
Ng, Anne Wai Man
;
Joyklad, Panuwat
A robust and sustainable solution is required to tackle the ever-growing generation of construction waste worldwide. It has been known that construction waste yields concrete with substandard mechanical properties when used as a replacement for natural aggregates. With attributes like easy application and low cost, this study investigated the performance of low cost and easily available steel clamps to improve the compressive stress–strain properties of concrete fabricated with recycled concrete and brick aggregates. Results demonstrate that steel clamps effectively improved the stress–strain behavior of recycled aggregate concrete, and this improvement was more pronounced in concrete with a higher percentage of recycled aggregates. Steel clamps confinement increased the compressive strength by up to 242% and 252% for recycled concrete and recycled brick aggregate concrete, respectively, whereas the corresponding strain was increased by up to 448% and 414%, respectively. The stress–strain response of steel clamp-confined RAC was idealized into two branches: the first branch was assumed to be parabolic in shape till the peak strength, and a linear degrading branch was assumed for the post-peak region. Separate equations were proposed using regression analysis for peak strength, strain, initial modulus, and post-peak degradation modulus. The complete stress–strain curves of steel clamp-confined RAC were generated by utilizing existing equations. The proposed regression equations were combined with existing equations to generate complete stress–strain curves of steel clamp-confined RAC. In general, good agreement between experimental and predicted stress–strain curves was obtained.
Some of the metrics are blocked by your
consent settings
Sustainable development of concrete through treated and untreated plastic waste aggregates
(2024-12-01)
Yooprasertchai, Ekkachai
;
Khursheed, Ahsan
;
Qureshi, Muhammad Irshad
;
Ejaz, Ali
;
Hussain, Qudeer
This study focused on sustainable and novel development of concrete through treated and untreated plastic waste aggregates. In this study, the surface of Elec-waste coarse aggregates was treated with sulfuric acid, marble dust coating, silica fume coating, and alkaline bleach. Elec-waste aggregates were used in concrete by replacing natural coarse aggregates in amounts of 10%, 20%, and 30%. The 10%, 20%, and 30% Elec-waste replacement ratios resulted in the compressive strength reduction of 8.97%, 27.99%, and 42.01%, respectively. The same percentage of Elec-waste aggregates reduced the splitting tensile strength by 21.77%, 35.89%, and 47.89%, respectively. However, the slump was observed to increase by 41.4%, 52.1%, and 68.8%, respectively. All the considered treatments enhanced the performance of Elec-waste aggregate concrete (E-WAC). Overall, the best improvement in the performance of E-WAC was imparted by silica fume coating, irrespective of the quantity of Elec-waste aggregates. The present study proposed an expression to estimate the reduction of the compressive strength of E-WAC. It was demonstrated that the equation by JCI-08 predicted splitting tensile strength of E-WAC close to experimental results.

Saingam, Panumas

Filters

Settings

Sort By

Results per page