Karin, Preechar

Preferred name

Karin, Preechar

Alternative Name

Karin, P.

Karin, Preecha

Main Affiliation

School of Engineering

preechar.ka@kmitl.ac.th

Now showing 1 - 10 of 27

Some of the metrics are blocked by your
consent settings
Physicochemical characteristics of ashes deposited on a wall flow diesel particulate filter of compression ignition engine
(2023-06-01)
Rodvanna, Sattatad
;
Srilomsak, Mek
;
Nuthong, Chaiwat
;
Charoenphanich, Chinda
;
Masomtob, Manop
The investigation of physicochemical characteristics of metal oxide ashes, deposited on a diesel particulate filter, was conducted using electron microscopy, energy dispersive spectroscopy, X-Ray fluorescence, and X-Ray diffractometry techniques. Iron is the main component of deposited ash on the DPF, and other ash components consisted of elements such as silicon, calcium, copper, sulfur, phosphorus, zinc, aluminum and minor chromium. It was clarified that this metal oxide ash has catalytic effect that contributed to an enhancement of soot oxidation. The apparent activation energies of soot oxidation on SiC powder and metal oxide ashes powder are approximately 169 and 135 kJ/mol, respectively.
Some of the metrics are blocked by your
consent settings
Comparison study on fuel properties of biodiesel from jatropha, palm and petroleum based diesel fuel
(2014-01-01)
Borhanipour, Morteza
;
Karin, Preechar
;
Tongroon, Manida
;
Chollacoop, Nuwong
;
Hanamura, Katsunori
The increase of air pollution and global warming is a threat for human life. Besides, the price of petroleum is increasing rapidly and the resources are diminishing. This obliged scientists and engineers to look for alternative sources of energy, which are cleaner and more sustainable. Biodiesel, defined as mono-alkyls of esters from vegetable oils and animals fat, is a cleaner renewable fuel and has been considered as the best alternative for petroleum based diesel fuel hence it can be used in any compression ignition engines without any significant modification. The main advantages of using biodiesel are its renewability and better quality of exhaust gas emissions due to their higher content of oxygen. The produce less soot and hence the feed stuck is plant it will regenerate the CO2 by the photosynthesis which ensures the renewability and reduces global warming. But these alternative fuels have faced some obstacles while utilizing in CI engines which are due to some of their physical and chemical characteristics. At this study the fuel properties of jatropha biodiesel and its blends (a non-edible feedstock) were compared with the properties of Palm biodiesel (an edible feedstock) and petroleum based diesel. The viscosity, density, oxidation stability, acid value, water content, iodine value, flash point, pour point, cloud point and calorific value of the samples were analyzed an discussed. The physical properties of the biodiesels are controlled by their chemical properties such as unsaturation level of fatty acids and oxidation stability. Results show that the viscosity of jatropha is higher than palm biodiesel although the density of palm biodiesel is higher. Oxidation stability of the biodiesel has impact on several chemical and physical properties and improvement of oxidation stability can make betterment in these properties. The results of this study will be used as a data backup for another research project. Copyright © 2014 SAE International and Copyright © 2014 TSAE.
Some of the metrics are blocked by your
consent settings
Effect of biofuel and soot on metal wear characteristic using electron microscopy and 3D image processing
(2017-11-05)
Karin, Preechar
;
Amornprapa, Warawut
;
Khamsrisuk, Phiranat
;
Budsayahem, Pol ake
;
Chammana, Pattara
The soot contamination in used engine oils of diesel engine vehicles was about 1% by weight. The soot and metal wear particle sizes might be in the range of 0-1 µm and 1-25 µm, respectively. The characteristics of soot affecting on metal wear was investigated. Soot particle contamination in diesel engine oil was simulated using carbon black. Micro-nanostructure of soot particles were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and laser diffraction spectroscopy (LDS). The metal wear behavior was studied by means of a Four-Ball tribology test with wear measured. Wear roughness in micro-scale was investigated by high resolution optical microscopy (OM), 3D rendering optical technique and SEM image processing method. It was found that the ball wear scar diameter increased proportionally to the soot primary particle size. The effect of biodiesel contamination were also increasing in wear scar diameter.
Some of the metrics are blocked by your
consent settings
Physicochemical characterization of forest and sugarcane leaf combustion's particulate matters using electron microscopy, EDS, XRD and TGA
(2021-01-01)
Oo, Hay Mon
;
Karin, Preechar
;
Chollacoop, Nuwong
;
Hanamura, Katsunori
Physical characteristics and quantitative elemental composition of PM and residual ash produced from sugarcane leaves (SCL) combustion were investigated using TEM-EDS compared with forest leaves (FRL). SEM-EDS was used to analyze the microstructure and chemical composition of biomass raw leaves and PM. XRD analysis was also performed to investigate the characterization of the crystalline nanostructure, structure of PM, and residual ash compared to the TEM image processing method. The oxidation kinetics of biomass raw materials, PM, and residual ash were investigated by TGA. The morphology of fine and ultrafine agglomerate structure of SCL soot and residual ash are not significantly different from the FRL soot and residual ash. The average diameter sizes of single primary nanoparticles of SCL and FRL soot are approximately 37 nm and 35 nm, while the sizes of residual ash are about 18 nm and 22 nm, respectively. The single primary nanoparticles of soot are mainly composed of curve line crystallites of carbon fringes, while residual ash is composed of straight-line lattice fringes. The average fringe lengths of SCL and FRL soot are about 1.25 nm and 1.04 nm from the outer shell and 0.89 nm and 0.74 nm from the inner core. The interlayer spacing of curve line carbon fringes of SCL and FRL soot is approximately 0.359 nm and 0.362 nm by the TEM image analysis and it was matched with XRD analysis. The biomass PMs are mainly composed of soot, Si, Ca, and K compounds: SiO<inf>2</inf>, CaCO<inf>3</inf>, and KCl.
Some of the metrics are blocked by your
consent settings
Oxidation Kinetics of Soot on Acicular Mullite Membrane Filter Using Electron Microscopy and Thermogravimetric Analysis
(2020-12-01)
Saenkhumvong, Eakkawut
;
Karin, Preechar
;
Charoenphonphanich, Chinda
;
Vittayakorn, Naratip
;
Hanamura, Katsunori
This paper investigates the oxidation kinetics of carbon black on acicular mullite using thermogravimetric (TGA) and mullite microstructures by scanning electron microscopy (SEM) for the development of diesel particulate filters (DPFs). It is observed that the amount of each chemical composition strongly affects the structure of mullite. The addition of AlF<inf>3</inf> and V<inf>2</inf>O<inf>5</inf> to mullite promotes the growth of needle-shaped mullite crystals. Thermogravimetric analysis was used to investigate and characterize chemical kinetics of soot oxidation for better understanding of designs and configurations of diesel particulate filters. The mass conversion of soot on the acicular mullite (ACM) is oxidized faster than that on the mullite (ML) membrane at all temperatures examined. The calculation of apparent activation energy (E<inf>a</inf>) of soot oxidation with isothermal methods on mullite was presented. The results showed that activation energy of soot oxidation is enhanced with ACM than with ML at all temperatures examined. The average calculated apparent activation energy of soot oxidation on ACM and ML are 146.4 kJ/mole and 155.3 kJ/mole, respectively.
Some of the metrics are blocked by your
consent settings
Impact of Engine Oil Additives on Nanostructure and Oxidation Kinetics of Diesel and Synthetic Biodiesel Particulate Matters using Electron Microscopy
(2019-12-19)
Koko, Phyozin
;
Karin, Preechar
;
Charoenphonphanich, Chinda
;
Chollacoop, Nuwong
;
Hanamura, Katsunori
Physicochemical characteristics of particulate matters which are influenced by engine oil additives from engine combustion of diesel and synthetic biodiesel: Hydrotreated vegetable oil (HVO) were successfully investigated using electron microscopy, electron dispersive X-ray spectroscopy and thermogravimetric analysis. The agglomerate structure of diesel PM, HVO PM and diesel blending lubricant PM are similar in micro-scales. However, nanostructure of soot is a spherical shape composed of curve line crystallites while the metal oxide ash nanostructure is composed of parallel straight line hatch patterns. The oxidation kinetics of fuel blending lubricant PMs are higher than neat fuel PMs due to catalytic effect of incombustible metal additives from engine lubricating oil.
Some of the metrics are blocked by your
consent settings
Physical characterization of biodiesel particle emission by electron microscopy
(2013-01-01)
Karin, Preechar
;
Songsaengchan, Yutthana
;
Laosuwan, Songtam
;
Charoenphonphanich, Chinda
;
Chollacoop, Nuwong
Nanostructures of diesel and biodiesel engine particulate matters (PMs) were investigated by using a Transmission Electron Microscopy (TEM). The average single particle sizes of biodiesel and diesel PMs are approximately 30-40 nm and 50-60 nm, respectively. Image processing process was used to estimate each carbon platelet length by using TEM image. The average carbon platelet length of biodiesel and diesel PMs are in the range of 0.1-7.0 nm. Moreover, carbon atoms per cubic volume of PMs are approximately 500-900. The result shows that engine load and fuel property are strongly impact on the size of single particle and carbon atom density of particle. This is one of interesting behaviors need to be investigated for better understanding. The results of this research would be used as basic information for design and develop removing process of PM emitted from engine combustion which using in diesel and biodiesel fuels. © Copyright @2013 SAE Japan and Copyright @ 2013 SAE International.
Some of the metrics are blocked by your
consent settings
Physicochemical Characterization of Diesel Engine’s Soot and Metal Oxide Ash Nanoparticles Using Electron Microscopy, EDS and TGA
(2021-06-01)
Karin, Preechar
;
Koko, Phyozin
;
Charoenphonphanich, Chinda
;
Chollacoop, Nuwong
;
Hanamura, Katsunori
Physicochemical characteristics of metal oxide ash derived from engine oil additives on particulate matter (PM) from a diesel direct injection compression ignition (DDI-CI) engine, in terms of nanostructure and oxidation kinetics, were investigated through electron microscopy, energy dispersive X-ray spectroscopy and isothermal thermogravimetric analysis. Diesel and synthetic biodiesel were used as the baseline fuel. Engine performance and combustion characteristics of neat diesel and synthetic biodiesel fuel were initially reported. To enhance the formation of ash derived from lubricant additives, an accelerated ash loading method was used by dosing 10% by mass directly into the fuels. Different single primary particle nanostructures of soot and metal oxide ash were clearly observed. Single primary particle nanostructure of soot was a spherical shape composed of curve line carbon crystallites, while nanostructure of metal oxide ash was a spherically round outline shape comprised with parallel straight-line lattice fringes. Soot oxidation kinetics was significantly enhanced due to the presence of metal oxide ashes in the engine’s PM. In addition, the elemental analysis of metal oxide ash, derived from engine oil additives, was investigated using electron dispersive X-ray spectroscopy.
Some of the metrics are blocked by your
consent settings
Impact of engine oil's additives on particulate matter's micro-and nanostructure using electron microscopy image analysis
(2019-01-01)
Koko, Phyozin
;
Karin, Preechar
;
Rungsritanapaisan, Sippakorn
;
Tongsri, Ruangdaj
;
Hanamura, Katsunori
According to increasingly stringent emission regulations on particle emissions from automotive vehicles, a diesel engine must be equipped with diesel particulate filter (DPF) to trap the particulate matters (PMs) which can be harmful to human health. Morphology and chemical composition of particulate matters were successfully studied using electron microscopy and electron dispersive x-ray spectroscopy (EDS) analysis. Microstructure of particulate matters derived from diesel blending lubricating oil were not significant different compared to diesel PM. Nanostructure of soot is a spherical shape composed of curve line crystallites and the particle sizes were in the range of 10 -60 nm while the metal oxide ash is composed of lattice fringes. Chemical composition analysis of EDS result showed that metallic additives from lubricating oil cannot be burned during combustion and might be transformed into metal oxide ash.
Some of the metrics are blocked by your
consent settings
Influence of V2O5 and AlF3 on Microstructure of Acicular Mullite Diesel Particulate Filter Along with Soot Oxidation Kinetics
(2021-12-01)
Saenkhumvong, Eakkawut
;
Karin, Preechar
;
Win, Swe Zin
;
Sirivarocha, Settavit
;
Chollacoop, Nuwong
In current research, aluminium oxide and silicon dioxide are used as raw materials for fabricating main structures of mullite diesel particulate filters. The variable substances applied to develop acicular mullite structure are titanium dioxide, aluminium fluoride, and vanadium oxide. Carbon black was used to create pores in mullite diesel particulate filters with 35 to 45% porosity based on the sintering temperature of 1300°C. The images of the filter’s porous surface microstructure were investigated using scanning electron microscopy. Vanadium oxide and aluminium fluoride play important roles in growth of acicular shape and acicular size for membrane, respectively. Acicular size of membrane varies from a hundred nano-meters to the submicron in needle diameter. The relation of all factors between pore size, porosity, surface roughness, and pin-shape microstructure can be controlled by additional amounts of additives. From Raman spectroscopy analysis, the soot formation of carbon black’s micro and nanostructure are acceptable to simulate diesel soot particles. In line with these results, carbon black was successfully used as a substitute of real engine soot in soot kinetics reactivity. In addition, the oxidation kinetics of soot particles on mullite and acicular mullite membrane were investigated by using tight contact in isothermal and loose contact in non-isothermal thermo-gravimetric analysis. The calculated apparent activation energies of soot oxidation with isothermal technique on mullite and acicular mullite membrane are approximately 213 and 141 kJ/mol while those values calculated with non-isothermal technique are 118 and 76 kJ/mol, respectively.

Karin, Preechar

Filters

Settings

Sort By

Results per page