Phongcharoenpanich, Chuwong

Preferred name

Alternative Name

PHONGCHAROENPANICH, Chuwong

Phongcharoenpanich, C.

Main Affiliation

School of Engineering

chuwong.ph@kmitl.ac.th

Now showing 1 - 5 of 5

Some of the metrics are blocked by your
consent settings
EBG-backed ultrawideband circularly polarized Archimedean spiral antenna scheme for IoT applications
(2025-12-01)
Luadang, Bancha
;
Ainthachot, Chalanthon
;
Janpangngern, Pisit
;
Pookkapund, Khanet
;
Torrungrueng, Danai
This research proposes a low-profile ultrawideband circularly polarized Archimedean spiral antenna with an electromagnetic band gap (EBG)-backed structure. The proposed antenna scheme consists of an upper-layer spiral radiator, a microstrip tapered balun, and a lower-layer high-impedance circular EBG reflector of three concentric rings of trapezoid-shaped unit cells. The antenna scheme can achieve a significant profile reduction, with a total height of 0.1 wavelengths at the lowest operational frequency. The integration of the EBG reflector improves the radiation characteristics and antenna gain, achieving a maximum gain of 9.87 dBic at 6.90 GHz. The EBG reflector also improves impedance matching and axial ratio (AR) over the 1.5–8.75 GHz frequency range, achieving a wide AR bandwidth of 141.46%. The novelty of this work lies in the integration of Archimedean spiral antenna with high-impedance EBG reflector of trapezoid-shaped unit cells to enhance the impedance and AR bandwidths without increasing the overall antenna profile. Essentially, the proposed antenna scheme is suitable for broadband communication systems that require ultrawide bandwidth, circular polarization, and a small form factor.
Some of the metrics are blocked by your
consent settings
Conceivable Design of a Wideband Unidirectional Antenna using Truncated Microstrip Patches for S-Band Applications
(2025-01-01)
Hemachai, Thanaphon
;
Janpangngern, Pisit
;
Dentri, Sitthichai
;
Phongcharoenpanich, Chuwong
This paper presents the conceivable design of a wideband unidirectional antenna suitable for CubeSat applications operating in the S-band frequency ranges of 2.025-2.110 GHz (uplink band) and 2.200-2.290 GHz (downlink band). The antenna employs a truncated microstrip patch design combined with additional parasitic patches to achieve circular polarization. It is printed on an RT/duroid<sup>®</sup> 5880 substrate with a thickness of 0.6 mm and a relative permittivity of 2.2. The design consists of a central truncated radiating patch and four segment-circular parasitic patches, positioned near the edges of the substrate to enhance bandwidth and axial ratio performance, which is crucial for achieving circular polarization. The antenna is excited using a coaxial probe feed to ensure efficient energy transfer and proper impedance matching. Simulation results demonstrate that the antenna achieves a wide impedance bandwidth covering 1.80 GHz to 2.40 GHz with a reflection coefficient (|S11|) below -10 dB. The axial ratio remains below 3 dB across the frequency range of 2.025 GHz to 2.290 GHz, confirming circular polarization, with a minimum axial ratio of 1.34 dB at 2.25 GHz. Additionally, the antenna exhibits a stable gain of approximately 7.28 dBic at 2.15 GHz, making it suitable for CubeSat communication systems requiring reliable and efficient signal transmission. To further strengthen the contribution of this research, a performance comparison with existing CubeSat antennas is provided, along with a discussion of potential environmental impacts in space, such as temperature variations and radiation effects. Future work will focus on prototyping, experimental validation, and optimizing the antenna design for different mission scenarios, including scaling for other frequency bands and multi-antenna configurations.
Some of the metrics are blocked by your
consent settings
Corner-truncated patch antenna with parasitic elements and circular feed slot for S-band CubeSat applications
(2025-12-01)
Hemachai, Thanaphon
;
Dentri, Sitthichai
;
Janpangngern, Pisit
;
Phakphisut, Watid
;
Torrungrueng, Danai
This study presents a corner-truncated patch antenna with symmetrically loaded parasitic elements and a circular feed slot designed for CubeSat S-band communication applications. The antenna design evolves through successive stages, integrating corner truncations, a slit-ring structure, and segment-circular parasitic patches to enhance impedance matching and polarization performance. In its final configuration, a dual-stacked arrangement with inter-substrate spacing and a vertical capacitive feed further improves current distribution symmetry and broadens the operational bandwidth. Parametric analysis validates the effectiveness of each antenna design refinement, demonstrating improvements in impedance bandwidth, axial ratio bandwidth, and gain performance. The fabricated prototype achieves a wide impedance bandwidth from 1.65 GHz to 2.70 GHz, fully encompassing the CubeSat uplink (2.025–2.110 GHz) and downlink (2.200–2.290 GHz) frequency ranges. It maintains an axial ratio below 3 dB across 1.97 GHz to 2.32 GHz, ensuring efficient circular polarization. Additionally, a stable gain of approximately 7.50 dBic at 2.025 GHz supports reliable communication with ground stations. The combination of compact structure, low profile, and wideband circular polarization makes the proposed antenna a promising candidate for CubeSat communication systems. The novelty of this research lies in the integration of a corner-truncated patch, symmetrically loaded segment-circular parasitic elements, and a circular slit-ring capacitive feed within a dual-stacked substrate configuration to achieve wideband circular polarization and stable unidirectional radiation.
Some of the metrics are blocked by your
consent settings
Ultrawideband Circularly Polarized Cavity-Integrated EBG-Backed Archimedean Spiral Antenna for IoT Applications
(2025-01-01)
Luadang, Bancha
;
Janpangngern, Pisit
;
Phongcharoenpanich, Chuwong
This paper presents a compact ultrawideband circularly polarized Archimedean spiral antenna integrating a cavity-backed structure with a circular EBG reflector. The hybrid design enhances gain, suppresses backward radiation, and improves directivity, particularly below 3.0 GHz. The antenna covers 1.5-9.0 GHz with |S11| ≤ -10 dB and axial ratio ≤ 3 dB. Simulations show peak gain over 11.96 dBic at 6.5 GHz and a front-to-back ratio improvement due to the cavity. The proposed structure is well-suited for GPS, Wi-Fi, and IoT applications.
Some of the metrics are blocked by your
consent settings
Investigations of a Circularly Polarized Slotted Corner-Truncated Microstrip Patch Antenna with Split-Ring AMC Reflector
(2025-01-01)
Ainthachot, Chalanthon
;
Janpangngern, Pisit
;
Dentri, Sitthichai
;
Phongcharoenpanich, Chuwong
This paper presents the design and development of a circularly polarized slotted corner-truncated microstrip patch antenna integrated with a split-ring artificial magnetic conductor (AMC) metasurface for WLAN applications at 2.45 GHz. The antenna design incorporates structural adaptations, such as slotted apertures and corner truncations, to enhance impedance matching and achieve circular polarization. To further improve performance, a split-ring AMC metasurface was employed, resulting in enhanced polarization purity and bandwidth. The proposed design achieves an impedance bandwidth (|S<inf>11</inf>| below -10 dB) from 2.33 GHz to 2.75 GHz and an axial ratio (AR) below 3 dB over the frequency range of 2.40 GHz to 2.55 GHz, and a peak gain of approximately 4.40 dBic at 2.45 GHz. Simulated results are validated by measured results of the fabricated prototype, demonstrating close agreement and confirming the robustness of the design methodology. This work highlights an innovative approach to compact and high-performance antenna design, ensuring its suitability for modern WLAN communication systems.

Phongcharoenpanich, Chuwong

Filters

Settings

Sort By

Results per page