Vittayakorn, Naratip

Preferred name

Alternative Name

Vittayakorn, N.

Vittayakorn, Narathip

Main Affiliation

School of Science

naratip.vi@kmitl.ac.th

Now showing 1 - 10 of 60

Some of the metrics are blocked by your
consent settings
Phase Formation, Morphology and Electrical Properties of Lead-Free BNBLT-xBSN Ceramics Synthesized via the Solid-State Combustion Technique
(2023-01-01)
Thatawong, Bhoowadol
;
Vittayakorn, Naratip
;
Rittidech, Aurawan
;
Bongkarn, Theerachai
Lead-free 1-x(Bi<inf>0.47</inf>Na<inf>0.47</inf>Ba<inf>0.06</inf>)<inf>0.95</inf>La<inf>0.05</inf>TiO<inf>3</inf>-xBa(Sn<inf>0.70</inf>Nb<inf>0.24</inf>)O<inf>3</inf> (BNBLT-xBSN) ceramics with x = 0, 0.01, 0.02, 0.03 and 0.04 mol.% were synthesized by the solid-state combustion technique with a calcination temperature of 750 °C for 2 h and a sintering temperature of 1150 °C for 2 h. The effect of BSN substitution on the phase formation, microstructure, dielectric, ferroelectric and energy storage properties of the BNBLT ceramics was investigated. With the substitution of BSN, the coexisting rhombohedral (R) and tetragonal (T) phases transformed into coexisting R and cubic (C) phase, verified by Rietveld refinement. The C phase increased with increased BSN content. The average grain size decreased from 1.14 to 0.89 µm when x increased to 0.03 and then increased to 0.96 µm. The measured density and maximum dielectric constant (ε <inf>m</inf>) tended to increase from 5.44 to 5.87 g/cm3 and 1800 to 1942 when x increased to 0.03, then decreased to 5.25 g/cm3 and 1501, respectively. The remanent polarization (P <inf>r</inf>) and coercive field (E <inf>c</inf>) decreased when x increased to 0.03. The 0.97BNBLT-0.03BSN ceramic exhibited the lowest energy loss density (W <inf>loss</inf> ∼ 0.10 J/cm3) and the highest energy-storage efficiency (η ∼ 77.3%) measured under an electric field of 70 kV/cm.
Some of the metrics are blocked by your
consent settings
Phase Evolution, Microstructure and Electrical Behavior of (Ba0.97Ca0.03)(Ti0.94-x/2Sn0.06-x/2Wx)O3 Ceramics Synthesized via the Solid-State Combustion Technique
(2022-01-01)
Udeye, Thanya
;
Onsri, Thanakrit
;
Yotthuan, Surirat
;
Pulphol, Phieraya
;
Vittayakorn, Naratip
This research studied the effect of W4+ substitution on the phase formation, microstructure and electrical properties of (Ba<inf>0.97</inf>Ca<inf>0.03</inf>)(Ti<inf>0.94-x/2</inf>Sn<inf>0.06-x/2</inf>W<inf>x</inf>)O<inf>3</inf> (BCTSW) ceramics with x = 0, 0.005, 0.010, 0.015 and 0.020 mol%. The BCTSW ceramics were synthesized by the solid-state combustion technique, using glycine as fuel. The powders and green pellets of BCTWS were calcined and sintered at 1100 °C for 4 h and 1400 °C for 2 h, respectively. A pure perovskite phase with coexisting orthorhombic and tetragonal phases were observed for all samples. The content of the tetragonal phase increased when x rose, as verified by the Rietveld refinement procedure. The average grain size and the measured density of the samples tended to decrease from 35 ± 0.56 to 1.9 ± 0.12 µm and 5.59 to 4.88 g/cm3, respectively, when x increased. The dielectric behavior of the ceramics strongly degenerated upon W4+ substitution. The undoped BCTS ceramic showed a well-saturated P-E hysteresis loop. With W4+ substitution, the samples’ P-E loops became unsaturated and a leakage current was created.
Some of the metrics are blocked by your
consent settings
Phase formation, microstructure and electrical properties of Ba0.9Ca0.1TiO3 ceramics fabricated via the solid-state combustion technique
(2022-01-01)
Sonchaopri, Nutkamon
;
Bhupaijit, Pamornnarumol
;
Yotthuan, Surirat
;
Sinkruason, Thanapon
;
Premwichit, Pathit
In this research, the effects of calcination temperature in a range of 1050–1200 °C for 2 h and sintering temperature in a range of 1325-1400 °C for 2 h on phase formation, microstructure and electrical properties of lead-free Ba<inf>0.9</inf>Ca<inf>0.1</inf>TiO<inf>3</inf> (BCT) ceramics fabricated via the solid-state combustion technique were investigated. For the XRD result, all the ceramics exhibited a coexisting phase between tetragonal and orthorhombic. The ceramic grain size tended to increase with increase of the sintering temperature. For BCT ceramic produced by the optimum sintering temperature (1375 °C for 2 h), the dielectric, ferroelectric and piezoelectric properties of ε <inf>C</inf>=7393, P <inf>r</inf>=7.60 μC/cm2<inf>,</inf> E <inf>C</inf>=5.99 kV/cm and d <inf>33</inf>=158 pC/N, respectively, were obtained.
Some of the metrics are blocked by your
consent settings
Effect of Na+ Substitution on the Phase, Microstructure, Electrical and Energy Storage Properties of BSBZNT Ceramics Prepared by the Solid-State Combustion Technique
(2023-01-01)
Chongsatan, Wistsarut
;
Didpim, Ratirom
;
Julphunthong, Phongthorn
;
Thatawong, Bhoowadol
;
Vittayakorn, Naratip
(Ba<inf>0.704</inf>Sr<inf>0.176</inf>Bi<inf>0.12</inf>)<inf>1-x</inf>Zn<inf>0.08</inf>Nb<inf>0.04</inf>Ti<inf>0.88</inf>O<inf>3</inf>-Na<inf>x</inf> (BSBZNT-xNa) ceramics with x = 0, 0.01, 0.03 and 0.05 mol%, were prepared by the solid-state combustion technique. The samples were calcined and sintered at 950 °C and 1375 °C, respectively, for 2 h. The phase, microstructure, dielectric, ferroelectric and energy storage properties were investigated. The X-ray diffraction patterns of the BSBZNT-xNa powders showed a perovskite phase for all samples. When x increased from 0-0.03, the average particle size increased from 380 to 480 nm, then decreased to 420 nm. All sintered samples showed the coexistence of the orthorhombic and cubic phases. The average grain size was in the range of 2.03 to 1.39 µm. The BSBZNT-0.01Na ceramic exhibited the highest dielectric properties at room temperature (ɛ<inf>r</inf> = 902, tanδ = 0.10), the lowest remanent polarization (P <inf>r</inf> = 0.10 µC/cm2), coercive field (E <inf>c</inf> = 0.43 kV/cm), and the highest energy storage efficiency (η ∼ 94.70%) measured under an electric field of 70 kV/cm.
Some of the metrics are blocked by your
consent settings
PHASE FORMATION AND ELECTRICAL PROPERTIES OF BCLTS CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Somsri, Widchaya
;
Charoenthai, Nipaphat
;
Sutthapintu, Aekkasit
;
Noisak, Jitrawan
;
Vittayakorn, Naratip
Lead-free Ba<inf>0.93</inf>Ca<inf>0.04</inf>La<inf>0.03</inf>Ti<inf>0.90</inf>Sn<inf>0.10</inf>O<inf>3</inf> (BCLTS) ceramics were fabricated via solid-state combustion technique. The BCLTS powders were calcined in a temperature range of 1075-1175°C for 2h and sintered in a temperature range of 1350-1450°C for 2h. The BCLTS powders exhibited a pure perovskite phase when calcined above 1150°C. All BCLTS ceramic samples displayed a perovskite structure with coexisting cubic and tetragonal phases, with a secondary phase observed only at 1450°C. The growth of grain size was increased with increasing sintering temperature (0.42 to 0.65 μm.). The highest dielectric and ferroelectric properties (ε<inf>r</inf>=3047, tan δ<inf>r</inf> = 0.029, P<inf>max</inf> = 9.52 μC/cm2, P<inf>r</inf> = 0.48 μC/cm2, E<inf>c</inf>= 1.04 kV/cm) were obtained at the sintering temperature of 1400°C. The altered phase structure in this research, compared to earlier studies, results in distinct outcomes for the dielectric and ferroelectric properties.
Some of the metrics are blocked by your
consent settings
Effect of the Firing Temperatures on the Phase Evolution and Electrical Properties of 0.85[0.94Bi0.5Na0.5TiO3-0.06BaTiO3]-0.15[Na0.73Bi0.09NbO3] Ceramics Synthesized via the Solid-State Combustion Method
(2023-01-01)
Pattanakasem, Wiwat
;
Yotthuan, Surirat
;
Hongsamsibjed, Pakornkiat
;
Suriwong, Tawat
;
Prasertpalichat, Sasipohn
In this research paper, we describe 0.85[0.94Bi<inf>0.5</inf>Na<inf>0.5</inf>TiO<inf>3</inf>-0.06BaTiO<inf>3</inf>]-0.15[Na<inf>0.73</inf>Bi<inf>0.09</inf>NbO<inf>3</inf>] (BNT-BT-NBN) ceramics fabricated by the solid-state combustion technique. The phase evolution, microstructure, dielectric, ferroelectric and energy storage properties were examined. The BNT-BT-NBN powders and ceramics were calcined and sintered between 650–900 °C and 1100–1175 °C, respectively, for 2 h. All samples showed a typical perovskite structure, as revealed by X-ray diffraction. The Rietveld refinement analysis of the ceramics suggested the samples sintered between 1100 and 1150 °C had coexisting R + T phases, while the R + T+C phases were observed in the ceramics sintered at 1175 °C. The average grain size of the samples increased from 0.52 to 1.39 μm with increased sintering temperature. The density of the ceramics increased from 5.12 to 5.45 g/cm3 when the sintering temperature increased from 1100 to 1150 °C, and then decreased. Increasing the sintering temperature from 1100 to 1150 °C caused the dielectric constant at T <inf>s</inf> (ε <inf>s</inf>) and the dielectric constant at T <inf>m</inf> (ε <inf>m</inf>) to increase from 1727 to 1945 and 1564 to 1750, respectively, and then ε <inf>s</inf> and ε <inf>m</inf> declined. All BNT-BT-NBN ceramics had good dielectric temperature stability with only a±10% change when the temperature ranged from room temperature to ∼300 °C. The optimum energy-storage properties (W <inf>rec</inf> = 0.62 J/cm3 and η = 83.2%) were obtained from the BNT-BT-NBN ceramics sintered at 1150 °C for 2 h. This data indicates that BNT-BT-NBN ceramics can be useful as lead-free materials for high density energy-storage capacitors.
Some of the metrics are blocked by your
consent settings
ELECTRIC AND MAGNETIC PROPERTIES OF Ba0.97Ca0.03Ti0.94Sn0.06O3-Mn0.85Ni0.15Zn0.15Fe2O4 MULTIFERROIC CERAMIC COMPOSITES FABRICATED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Sonchaopria, Nutkamon
;
Meechob, Jirayut
;
Thatawong, Bhoowadol
;
Vittayakorn, Naratip
;
Pinitsoontorn, Supree
Multiferroic composites with the general formula (1-x)(Ba0.97Ca0.03Ti0.94Sn0.06O3)-x(Mn0.85Ni0.15Zn0.15Fe2O4) (BCTS/MNZF) (x = 0.1, 0.2, 0.3, 0.4, and 0.5) were prepared using the solid-state combustion method. The structure, morphology, dielectric, ferroelectric, magnetic, and magnetoelectric properties were analyzed. The samples were sintered at 1,300ºC for 2 h. The X-ray Diffraction (XRD) patterns revealed tetragonal perovskite, orthorhombic perovskite, and cubic spinel structures corresponding to the BCTS and MNZF phases. Secondary phases (Mn2O3 and SnO) appeared in the sintered samples with x>0.2. Increasing MNZF content enhanced ferrite grain growth in the composites. The dielectric constant showed an overall decreasing trend with increasing MNZF content, with a smaller effect at lower frequencies. At lower frequencies, the dielectric constant declined with increasing frequency before stabilizing around 10 kHz. As ferrite content increased, the density, dielectric constant, and magnetoelectric coefficient (αME) decreased from 5.66 to 5.12 g/cm³, 1388 to 862, and 7.24 to 4.05 mV/cm·Oe, respectively. While the saturation magnetization (Ms) rose substantially from 0.75 to 13.14 emu/g. These findings offer valuable insights into enhancing lead-free multiferroic composite ceramics for targeted applications in magnetoelectric devices.
Some of the metrics are blocked by your
consent settings
ELECTRICAL AND MAGNETIC PROPERTIES OF MULTIFERROIC Co0.6Zn0.4Fe1.7Mn0.3O4 DOPED 0.99Bi0.47Na0.47Ba0.06TiO3-0.01Ba(Sn0.70Nb0.24)O3 CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION TECHNIQUE
(2025-01-01)
Luangpangai, Anupong
;
Chuai, Phomphon
;
Rittidech, Aurawan
;
Pinitsoontorn, Supree
;
Jantaratana, Pongsakorn
Multiferroic (1-x)[0.99Bi<inf>0.47</inf>Na<inf>0.47</inf>Ba<inf>0.06</inf>TiO<inf>3</inf>-<inf>0.01</inf>Ba(Sn<inf>0.70</inf>Nb<inf>0.24</inf>)O<inf>3</inf>]-xCo<inf>0.6Z</inf>n<inf>0.4</inf>Fe<inf>1.7</inf>Mn<inf>0.3</inf>O<inf>4</inf> (abbreviated as BNBT-BSN-xCZFMO) ceramics with x ranging from 0 to 0.20 were fabricated using the solid-state combustion technique. The effect of varying BNBT-BSN: CZFMO ratios on the phase structure, microstructure, electrical and magnetic properties was investigated. X-ray diffraction (XRD) analysis of pure BNBT-BSN showed a perovskite structure with rhombohedral and tetragonal phases. The doped BNBT-BSN-xCZFMO ceramics displayed coexisting rhombohedral, tetragonal, and cubic spinel phases, with the cubic spinel phase increasing when the CZFMO content increased. In addition, the XRD peaks shifted to higher angles as the CZFMO content increased, indicating a decrease in lattice parameters. The dielectric constant decreased with higher CZFMO content and higher frequencies. The pure BNBT-BSN ceramic exhibited a saturated P-E loop with a Pmax of 33.2 µC/cm2, Pr of 26.1 µC/cm2, and an Ec of 14.5 kV/cm. With increased CZFMO content, non-saturated and bloated P-E loops with lower Pmax, Pr, and Ec were observed, implying a rise in the leakage current. The addition of CZFMO induced ferromagnetic behavior in the ceramics, leading to an increase in Ms and a reduction in Hc as CZFMO content increased. The magnetoelectric coupling coefficient of BNBT-BSN-xCZFMO ceramics continuously increased with higher CZFMO content.
Some of the metrics are blocked by your
consent settings
PHASE FORMATION AND ELECTRICAL PROPERTIES OF Ba0.91Ca0.09Ti0.916Sn0.084O3-0.1WT%ZnO -0.1WT%MnO2 LEAD-FREE FERROELECTRIC CERAMICS SYNTHESIZED VIA THE SOLID-STATE COMBUSTION METHOD
(2025-01-01)
Yimsabai, Sununta
;
Somsri, Widchaya
;
Vittayakorn, Naratip
;
Charoenthai, Nipaphat
;
Suthapintu, Aekasit
This work investigated the effect of firing temperatures on the phase formation, microstructure, and electrical properties of Ba0.91Ca0.09Ti0.916Sn0.084O3-0.1wt%ZnO-0.1wt%MnO2 (BCTS-ZnMn) lead-free ferroelectric ceramics synthesized via the solid-state combustion method. Glycine was used as fuel to reduce the synthesis temperature. The samples were calcined at temperatures from 1050 to 1250°C (in 50°C increments) for 3 h and sintered from 1250 to 1450°C (in 50°C increments) for 3 h. A pure perovskite phase was found in the powders calcined above 1100°C. The phase structure, microstructure, dielectric and ferroelectric properties of the ceramics were examined. The X-ray diffraction (XRD) analysis for the ceramics revealed the presence of tetragonal (T) and orthorhombic (O) phases in all the ceramics. The average particle size and average grain size increased with increasing firing temperatures. The density, dielectric constant at the Curie temperature (ɛc), Pr and Ps tended to increase with increasing sintering temperatures, up to 1400°C, and then decreased at 1450°C. The ceramic sintered at 1400°C exhibited the highest density (5.89 g/cm3), dielectric response (ɛc = 13324) and good ferroelectric behavior (Pr = 8.67 μC/cm2, Ps = 17.92 μC/cm2 and Ec = 0.99 kV/cm).
Some of the metrics are blocked by your
consent settings
Phase evolution, microstructure and electrical response of KNNT ceramics with Li+ substitution and doping
(2022-01-01)
Yotthuan, Surirat
;
Udeye, Thanya
;
Prasertpalichat, Sasiphon
;
Pulphol, Phieraya
;
Vittayakorn, Naratip
Lead-free (K<inf>0.5</inf>Na<inf>0.5</inf>)(Nb<inf>0.7</inf>Ta<inf>0.3</inf>)O<inf>3</inf> (KNNT) ceramics with Li+ substitution (KN<inf>0.5-x</inf>Li<inf>x</inf>NT) and direct (KNNT-xLi) doping at x = 0, 0.01, 0.02, 0.03 and 0.04 mol% were synthesized by the solid-state combustion route. The phase, microstructure, dielectric and ferroelectric properties of the ceramics were examined. The XRD pattern of the ceramics revealed orthorhombic and tetragonal phases in all specimens. The Rietveld refinement procedure showed that increasing either the Li+ substitution or doping levels enhanced the amount of the tetragonal phase. It was found that Li+ doping, either substitutional or additional, enhanced the Curie temperature (T <inf>C</inf>) by increasing the tetragonal distortion, while the dielectric constant (ε <inf>C</inf>) decreased. The good remanent P-E loops of the KN<inf>0.5-x</inf>Li<inf>x</inf>NT ceramics were found with x = 0.01 (P <inf>r</inf>∼10.89 µC/cm2 and E <inf>C</inf>∼13.09 kV/cm), while for KNNT-xLi ceramics, it was obtained with x = 0.02 (P <inf>r</inf>∼15.65 µC/cm2 and E <inf>C</inf>∼11.46 kV/cm), which were confirmed by remanent P-E hysteresis measurements.

Vittayakorn, Naratip

Filters

Settings

Sort By

Results per page