Now showing 1 - 2 of 2
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Flame spray-synthesized Pt-Co/TiO2 catalysts for the selective hydrogenation of furfural to furfuryl alcohol
    (2021-01-15)
    Tolek, Weerachon
    ;
    Khruechao, Kitima
    ;
    Pongthawornsakun, Boontida
    ;
    Mekasuwandumrong, Okorn
    ;
    Cadete Santos Aires, Francisco José
    Flame spray-synthesized Pt/TiO<inf>2</inf> and PtCo/TiO<inf>2</inf> catalysts with 0.7 wt% Pt and 0–0.4 wt% Co were studied in the hydrogenation of furfural to furfuryl alcohol (FA) at 50 °C and 2 MPa H<inf>2</inf>. Particle formation under high temperature flame facilitated high Pt dispersion and formation of Pt-TiO<inf>x</inf> interface sites, which were beneficial for furfural conversion to FA. Modifying with Co accelerated rutile phase TiO<inf>2</inf> formation, which strongly diminished hydrogenation activity on the (FSP)-PtCo/TiO<inf>2</inf>. On the other hand, (I)-PtCo/TiO<inf>2</inf> prepared by conventional impregnation, anatase phase TiO<inf>2</inf> was preserved (> 85%) and both furfural conversion and FA selectivity increased upon increasing Co loading.
  • Some of the metrics are blocked by your 
    Item type:Publication,
    One-Pot Conversion of Furfural to γ-Valerolactone over Co- and Pt-Doped ZSM-5 Catalysts
    (2023-03-01)
    Tolek, Weerachon
    ;
    Auppahad, Warucha
    ;
    ;
    Mekasuwandumrong, Okorn
    ;
    Praserthdam, Piyasan
    γ-Valerolactone (GVL) is one of the useful biomass compounds produced via different reaction pathways from hemicellulose. In this study, Co- and Pt-doped/ZSM-5 catalysts with different Co loadings (0–10 wt.%) and Pt loadings (0.5–2 wt.%) were prepared by impregnation method and employed in a one-pot conversion of furfural to GVL. The yield of GVL increased with increasing reaction temperature from 100 to 140 °C. At the reaction temperature of 120 °C, higher amounts of secondary products such as AL and IPL can be converted to GVL, especially on the Co- and Pt-modified ZSM-5 catalysts. Compared to the non-modified H-ZSM-5 (GVL yield 35.4%), Co- and Pt-doped ZSM-5 catalysts exhibited much higher yield of GVL with the 1%Pt/ZSM-5 catalyst showing the highest yield of GVL at 85.4% at 120 °C and 1 bar N<inf>2</inf> without the use of liquid acid or external H<inf>2</inf> supply. The catalyst performances were correlated to the physicochemical properties of the catalysts such as the amount and type of acid sites. The NH<inf>3</inf>-TPD and in situ FTIR spectra of pyridine adsorption results revealed that Co- and Pt-loaded on ZSM-5 enhanced Lewis and weak acid sites, which are beneficial for the reaction. The results present a simple strategy to obtain high GVL yield under relatively mild conditions.