Now showing 1 - 3 of 3
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Influence of ethanol biodiesel blends on a diesel engine's efficiency and exhaust emission characteristics
    (2022-01-01)
    Kanokkhanarat, Phobkrit
    ;
    ; ;
    Wongpattharaworakul, Veerayut
    ;
    Srisurangkul, Chadchai
    The harm caused by polluted air occurs from dust, smoke, or soot. One of the main causes of pollutions is exhaust emission that comes from diesel engines of cars, trucks, buses, heavy machines, or generators for industrial because their thermal efficiency, torque, and performance are higher than the other engines. To reduce the emission from diesel engines, the fuel substitute for biodiesel which is made from based palm oil is one of the alternatives to use. So, the purpose of this paper is an experimental investigation of the engine performance, combustion characteristics, and smoke intensity of commercial biodiesel fuels (B10 and B20), pure biodiesel fuel (B100), and pure biodiesel blended with ethanol fuels (B100E5 and B100E10), which were performed at various loads (56, 84, 112, and 140Nm) and conducted at constant engine speeds (1000, 1500, and 2000 rpm). The experimental results show that pure biodiesel fuel (B100) and pure biodiesel blended with ethanol fuels (B100E5 and B100E10) have engine performance and combustion characteristics similar to commercial biodiesel fuels (B10 and B20). However, pure biodiesel fuels (B100) and pure biodiesel blended with ethanol fuels (B100E5 and B100E10) can reduce the emissions as the smoke intensity from commercial biodiesel (B10 and B20) is more than 50%.
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Investigation of the Impact Bioethanol Blends into Biodiesel on Combustion Characteristics, Engine Performance, and Emissions of Diesel Engine
    (2022-01-01)
    Kanokkhanarat, Phobkrit
    ;
    ; ;
    Wongpattharaworakul, Veerayut
    ;
    Srisurangkul, Chadchai
    Emissions from a diesel engine are dangerous to the environment and human health. Substitutable fuels from a renewable source are one of the alternatives to reduce emissions. Neat biodiesel from based palm oil (B100) can reduce emissions from higher oxygen content to be more complete combustion. The disadvantage of neat biodiesel is lower thermal efficiency from an advancement ignition. To improve this problem, adding bioethanol produced from agriculture products into neat biodiesel by weight ratio as B100E5 (95% B100 with 5% bioethanol) and B100E10 (90% B100 with 10% bioethanol). Hence, the focus of this research is to examine the combustion and emission characteristics, including engine performance, of bioethanol blends into neat biodiesel fuels (B100E5 and B100E10) compared with neat biodiesel (B100). All samples were tested at an engine load of 140 NM with constant engine speeds of 1000, 1500, and 2000 RPM on a diesel engine. The results of bioethanol blends into biodiesel fuels indicate that the pressure in the combustion cylinder and rate of heat release increase with increasing percentages of bioethanol. B100E10 shows the highest brake thermal efficiency. The smoke intensity of bioethanol blends into biodiesel fuels is reduced by more than 50% when compared to neat biodiesel fuel, and higher NOx emission from higher oxygen content in the fuels.
  • Some of the metrics are blocked by your 
    Item type:Publication,
    Experimental investigation of the influence of ethanol and biodiesel on common rail direct injection diesel Engine's combustion and emission characteristics
    (2022-11-01)
    Wai, Phyo
    ;
    Kanokkhanarat, Phobkrit
    ;
    Oh, Ban Seok
    ;
    Wongpattharaworakul, Veerayut
    ;
    This study aims to characterize the effect of oxygenated biofuels in diesel engine combustion, thermal efficiency, and emission by blending different percentages of ethanol and biodiesel with fossil fuel derived diesel. In this research, 5% and 10% by weight of bioethanol were added to commercial B10 (10% biodiesel and 90% diesel), B20 (20% biodiesel and 80% diesel) and B100 (100% biodiesel) and experimented on using a 3 L four-cylinder common rail diesel engine. The experiment was performed under three engine speeds of 1000 rpm, 1500 rpm, and 2000 rpm with three constant engine torques of 56 Nm, 84 Nm, and 140 Nm. The results show that ethanol-biodiesel-diesel ternary blended fuels are higher in premixed combustion pressure and net heat release rate (NHRR) peaks. The cumulative heat release of ethanol blended fuels is also higher for ethanol blended fuels. The fuel consumption increased with the ethanol and biodiesel percentage in the blended fuels due to the lower heating value while the brake thermal efficiency did not decrease. It was clearly observed that the particle emission could be reduced by more than 50% when ethanol and biodiesel percentage increased.