Loading...
Investigation of the Wheel Power and State of Charge of Plug-In Hybrid Electric Vehicles (PHEVs) on a Chassis Dynamometer in Various Driving Test Cycles
Author(s)
Date Issued
November 1, 2025
Type
Article
Abstract
The purpose of this study is to monitor the battery performance of plug-in hybrid electric vehicles (PHEVs) on a chassis dynamometer using the US06, NEDC, and EPA highway driving cycles. The chassis dynamometer simulates vehicle operation and driving conditions and allows for precise simulation of pre-defined driving cycles, including simulations of acceleration, deceleration, stopping, and re-acceleration on the road. In the case of the US06 driving cycle, the results for (EV mode) compared with energy consumption during electric testing revealed a consistent decrease in the SOC (state of charge) due to the rapid response of the electric motor distribution to the changing power, as well as electric power fluctuations during driving conditions. Under the NEDC, the test results for electric power (EV) compared with energy consumption during electric testing revealed that the SOC gradually decreased at the start of the test due to low driving speeds. Towards the end, at around 800 s, an increase in driving speed resulted in a noticeable drop in SOC. The electric power varied during the driving cycle in this test due to the motor’s rapid response to changes in power distribution while driving. For the EPA Highway driving cycle test, the test results for electric power (EV) compared with energy consumption during continuous electric testing indicated a gradual decrease in the SOC at first due to low driving speeds. As the driving speed increased after about 300 s, the SOC rapidly decreased. Because of the motor’s quick response to changes in the power distribution while driving, the electric power varied according to the driving cycle.
Citation
Applied Sciences Switzerland, 15(22), 2025