Loading...
Coal bottom ash use in traditional ceramic production: evaluation of engineering properties and indoor air pollution removal ability
Author(s)
Ongwandee, Maneerat
Namepol, Kan
Yongprapat, Kamolchai
Homwuttiwong, Sahalaph
Pattiya, Adisak
Morris, John
Chavalparit, Orathai
Date Issued
November 1, 2020
Type
Article
Abstract
Coal bottom ash (CBA) disposed to landfills causes environmental issues. Thus, we used CBA in traditional clay ceramics that had the triple advantage of consuming troublesome waste, adsorbing volatile organics and being decorative indoors, replacing up to 40% by weight of clay with CBA and firing from 700 to 1300 °C. Clay and CBA mixtures were cast, cured at room temperature for 24 h and fired at several temperatures. Firing temperature impacted linear shrinkage, water absorption and fracture toughness, more strongly than CBA mixing proportion. Above 1000 °C, fracture toughness and water absorption resistance was enhanced but shrinkage increased. However, adding CBA lessened the contraction. SEM confirmed complete sintering as clay particles fused as a rigid solid above 1000 °C. X-ray diffraction patterns of ceramics containing CBA showed crystobalite and labradorite, in addition to quartz, due to flux materials in CBA. Leachability tests showed that the CBA ceramics were not ‘toxic’ on the USEPA TCLP regulatory list. Adsorption of gaseous toluene, a representative indoor pollutant, followed a Freundlich model: CBA made the adsorption sites more homogeneous, reduced the interaction mechanisms on the surfaces and thus the Freundlich exponent. Increased CBA increased toluene adsorption by 2–7 times.
Citation
Journal of Material Cycles and Waste Management, 22(6), 2118-2129, 2020