Loading...
Optimization of Process Conditions for Hard Disk Drive Assembly for Defect Reduction
Date Issued
November 1, 2023
Type
Article
Abstract
A spoiler installed in a hard disk drive can reduce the airflow velocity that causes vibration at an actuator arm and its head. In the case study, a hard disk drive manufacturer identified the defect of a loosely tightened spoiler in the hard disk drive by the spoiler installation machine. This occurred as a result of incorrect screw spacing (also called ‘the screwdriver encoder’). There was no study that specifically specified or created a suitable relationship model between the screwdriver encoder and associated parameters for the installation of a spoiler. Factors affecting the screw spacing were determined using multiple regression analysis, and a mathematical model of the significant factors of the screwdriver encoder was built. Data were collected from the spoiler installation machine and its software. Four factors were identified with the potential to impact the screwdriver encoder as (1) vacuum level for picking up the screw, (2) time spent in tightening the screw, (3) bit angle, and (4) screw torque. The ANOVA results pointed out that the screw torque within the range of experimental values did not affect the screw spacing, and a quadratic regression model was the most appropriate under various statistical criteria. This research demonstrated that a sophisticated regression model, i.e., a cubic model, is not always a good choice for an agent. In addition, the optimal values for the spoiler installation machine were determined. The faults decreased by 0.0096% from 0.055% each month. For choosing the relationship model of additional workpiece screw tightening variables, this research phase can be utilized as a guideline.
Citation
International Journal of Mechanical Engineering and Robotics Research, 12(6), 347-353, 2023