Loading...
Experimental investigation into the performance of cutting betel nut machine via response surface methodology and desirability function
Author(s)
Bulan, Ramayanty
Siregar, Kiman
Wardhana, Muhammad Yuzan
Lubis, Hamzah Hambali
Thamren, Dewi Sartika
Haris, Oscar
Sitorus, Agustami
Date Issued
January 1, 2022
Type
Article
Abstract
Cutting betel nut machines are increasingly being designed by engineers using local material. However, the performance of the cutting betel nut machine is influenced by the moisture content of the betel nut and the rotational speed of the machine. In this study, the performance of cutting a betel nut machine under moisture content of betel nut and rotational speed of the machine was studied using response surface methodology (RSM) and desirability function. Central Composite Design (CCD) coupled with RSM and desirability function was employed to evaluate the impact of moisture content of betel nut (34.68–50.54%, w.b.) and rotational speed (600–1000 rpm) on machine capacity (kg/hr), efficiency (%), and losses (%) responses. The desirability function was then used to optimize moisture content and rotational speed yielding maximum machine capacity and efficiency at lower losses. Three verification experiments were run to ensure the empirical relationships were valid. Optimum requirements of process parameters have been seen at which moisture content of 50.54% (w.b.) and rotational speed of 1000 rpm was achieved in maximum machine capacity of 44.16 kg/hr at higher efficiency (92.72%) and lower losses (6.31%). The model's conclusions were very consistent with the confirmed values. The results proved that an appropriate performance of the machine can be achieved using moisture content of betel nut and rotational speed of machine cutting betel nut.
Citation
Engineering Solid Mechanics, 10(3), 253-262, 2022