Loading...
Electrical capacitance tomography system for industrial applications
Author(s)
Date Issued
December 1, 2006
Type
Conference Paper
Abstract
An electrical capacitance tomography system (ECT) has been developed. The system consists of a circular sensor with 8 electrodes. A charge generator injects charges into the sensor filled with objects different dielectric constants. The charges, in the form of potential dropped, on another electrode are measured and acquired digitally to a PC for calculating the capacitance and estimating the dielectric distribution. Linear back-projection algorithm (LBP) with iterations is applied for reconstructing cross sectional images of the sensor. Some experiments as the sensor filled with vegetable oil and a Teflon bar placed on a specified area was carried on. We have found that the minimum and maximum capacitance between the electrode pairs is about 0.1245 pF and 2.6760 pF respectively. These very low capacitance values suggested that the measuring circuit being implemented should have high sensitivity and also be insensitive to noise. The reconstructed images of the object closely resemble the cross-section of the specific test phantom. The low gray level artifacts, however often present in the reconstructed image because of the limitation of the LBP algorithm. This may be improved by using image thresholding or using suitable number of iterations.
Citation
Lecture Notes in Engineering and Computer Science, 558-561, 2006