Loading...
Clutter Effect on a Combination of Microwave Imaging and Target Identification Using Ground-Penetrating Radar
Author(s)
Date Issued
January 1, 2024
Type
Article
Abstract
This paper presents an experimental investigation of the effect of clutter on the performance of microwave imaging and target identification using ground-penetrating radar (GPR) for buried objects. Signals collected by the GPR were formed to be B-scan and 3D images to carry out the microwave imaging of buried objects. Poles extracted using the short-time matrix pencil method from a late-time response of the received signal collected at a specific position were exploited to identify buried objects. The experiment was set up by constructing a large box filled with sand where an L-shaped metallic sheet was buried. The GPR was installed along with a 2-dimensional scanner above the box to image and identify the buried metallic sheet. In order to investigate the effect of the clutter on the performance of the GPR-based microwave imaging and target identification, small rocks were arranged on the sand surface, and their density was then varied. The experimental results have shown that clutter density significantly affects the sharpness of the B-scan and 3D images. The rocks result in an additional surface layer in the images. Moreover, the results have also shown that the clutter does not affect the performance of the identification of the buried object. From the results, the poles obtained from the GPR scanning inside and outside the buried object region differed. This confirms that the poles of the buried object should be different from those without the object. The poles of the buried object remain constant, although rocks on the sand surface exist since the clutter affects only the early-time response (not the late-time response). With varying clutter densities, the underlying poles were significantly changed, but this does not affect the identification of the buried object.
Citation
IETE Journal of Research, 70(6), 5919-5932, 2024