Loading...
The Study of the Effect of Multilayer MXene Incorporation on the Properties of Polyacrylate Composites Fabricated by Stereolithography
Author(s)
Sukpimai, Kamtorn
Date Issued
January 1, 2026
Type
Book Chapter
Abstract
This study explores the incorporation of multilayer Ti3C2Tx MXene into a polyacrylate-based photocurable resin for stereolithography (SLA). Composites with 3–10 wt% MXene were fabricated and characterized for microstructure, electrical, mechanical, and dimensional accuracy. SEM and XRD confirmed successful MXene formation with partial agglomeration. Electrical conductivity improved up to 8 wt% loading but declined at 10 wt% due to filler aggregation. Mechanical testing showed reduced strength and stiffness but increased ductility with higher MXene content. Optical microscopy revealed high printing resolution, with ~3% error at the top surfaces and ~13% at the bottom. These results demonstrate the feasibility of SLA-printed MXene composites while highlighting the need for optimized dispersion to balance performance.
Citation
Solid State Phenomena, 394, 33-38, 2026