Loading...
Electrospun dextran fibrous membranes
Author(s)
Ritcharoen, Watadta
Thaiying, Yaowaporn
Saejeng, Yupa
Rangkupan, Ratthapol
Meechaisue, Chidchanok
Supaphol, Pitt
Date Issued
June 1, 2008
Type
Article
Abstract
Ultra-fine fiber mats of dextran (powder; Mw = 64,000-76,000 Da) were fabricated by electrospinning, using water as the solvent. The effects of solution concentration (i.e., 0.7-1.3 g mL-1) and applied electric field (9-21 kV/15 cm) on morphological appearance and size of the obtained fibers were investigated. Under a fixed electric field of 15 kV/15 cm and a fixed solution flow rate of 0.25 mL h-1, beaded fibers were observed up to a critical concentration of about 0.9 g mL-1, beyond which only smooth fibers were obtained. The average diameter of these fibers increased monotonically with increasing the solution concentration (i.e., from ∼290 to ∼1950 nm). For the dextran solutions investigated, increasing the electric field generally caused the diameters of the obtained fibers to increase, with the average diameter of the obtained fibers ranging between 520 and 1760 nm. To improve the usefulness of the electrospun dextran fiber mats in an aqueous medium, cross-linking with glutaraldehyde was necessary. The effects of curing temperature (i.e., 70-90 °C), curing time (i.e., 3-48 h), and added MgCl2 catalyst (i.e., 0.01-0.03 g) on physical integrity of the cross-linked dextran membranes in water were investigated. Both the swelling and the weight loss in water of the cross-linked membranes were generally found to decrease with increasing curing temperature, curing time, and MgCl2 loading and the cross-linking did not affect the morphology of the obtained membranes. © Springer Science+Business Media B.V. 2008.
Citation
Cellulose, 15(3), 435-444, 2008