Loading...
Numerical prediction on laminar heat transfer in square duct with 30° angled baffle on one wall
Date Issued
August 1, 2010
Type
Article
Abstract
A numerical investigation on periodic laminar flow and heat transfer behaviors in a three-dimensional isothermal wall square duct fitted with 30° angled baffles on lower duct wall only is presented. The computations based on a finite volume method with the SIMPLE algorithm have been conducted for the fluid flow in terms of Reynolds numbers ranging from 100 to 2000. The angled baffles with attack angle of 30° are mounted periodically on the lower duct wall to generate a longitudinal vortex flow through the tested duct. Effects of different baffle height and three pitch length ratios on heat transfer and flow characteristics in the duct are investigated. The study shows that the longitudinal vortex flow created by the baffle helps to induce impinging flows over the baffle trailing end sidewall and the inter-baffle cavity wall resulting in drastic increase in heat transfer rate over the test duct. The computational results reveal that the Nusselt number ratio and the maximum thermal enhancement factor values for using the angled baffle are, respectively, found to be about 7.9 and 3.1 at Re=2000, BR=0.3 and PR=1.5. © 2010 Elsevier Ltd.
Citation
International Communications in Heat and Mass Transfer, 37(7), 857-866, 2010