Loading...
Hydrogen production from catalytic supercritical water reforming of glycerol with cobalt-based catalysts
Author(s)
Pairojpiriyakul, Thirasak
Croiset, Eric
Kiatkittipong, Worapon
Arpornwichanop, Amornchai
Assabumrungrat, Suttichai
Date Issued
April 15, 2013
Type
Article
Abstract
Glycerol reforming under catalytic supercritical water at temperatures in the range of 723-848 K using Co catalyst deposited on various supports including ZrO2, yttria-stabilized zirconia (YSZ), La2O3, γ-Al2O3, and α-Al2O3 was investigated. An increase in operating temperature promoted the continued increase in glycerol conversion; however, carbon formation causing system operation failure was observed for γ-Al2O3 and α-Al2O3 at high operating temperatures (i.e. 748-798 K). Co supported on YSZ provided the most efficient performance for hydrogen production. 10 wt.% Co loading on YSZ support was an optimum amount to enhance the reaction. The increase in glycerol conversion and reduction of the amount of liquid products were observed for lower weight hourly space velocity (WHSV), higher operating temperature or higher cobalt loading. On Co/YSZ catalyst, glycerol conversion of 0.94 and hydrogen yield of 3.72 was obtained with WHSV of 6.45 h-1at 773 K. © 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Citation
International Journal of Hydrogen Energy, 38(11), 4368-4379, 2013