Loading...
Quantitative prediction of nitrate level in intact pineapple using Vis-NIRS
Author(s)
Date Issued
January 1, 2015
Type
Article
Abstract
Before pineapples are canned, the ones with high nitrate level must be sorted out first because nitrate causes black stains on the surface of the can; therefore, a nondestructive technique for sorting out pineapples is clearly needed. The use of visible and near infrared (Vis-NIR) spectroscopy for such purpose was investigated in this study. A batch of 75 pineapple fruits that would have been delivered to a canning factory was tested. Spectra were acquired using a spectrophotometer in interactance mode with wavelengths in the region of 400-2500 nm. Twelve scans of different parts of each pineapple were made. The actual amount of nitrate in the pineapple flesh was determined by HPLC. Original spectra and pretreated spectra were both used to construct calibration models with partial least squares regression (PLSR). The best model was obtained from an average spectrum pretreated with first derivative treatment at the wavelength range of 600-1200 nm. Predictions based on this model matched closely with the actual nitrate contents, with a high correlation coefficient (R) of 0.95 and a low root mean square error of prediction (RMSEP) of 1.77 ppm. These results demonstrate that Vis-NIR spectroscopy can be used for rough screening of intact pineapple.
Citation
Journal of Food Engineering, 150, 29-34, 2015