Loading...
Piezoelectric-Induced Triboelectric Hybrid Nanogenerators Based on the ZnO Nanowire Layer Decorated on the Au/polydimethylsiloxane-Al Structure for Enhanced Triboelectric Performance
Author(s)
Jirayupat, Chaiyanut
Kasamechonchung, Panita
Wutikhun, Tuksadon
Tantisantisom, Kittipong
Rayanasukha, Yossawat
Jiemsakul, Thanakorn
Tansarawiput, Chookiat
Liangruksa, Monrudee
Khanchaitit, Paisan
Horprathum, Mati
Porntheeraphat, Supanit
Klamchuen, Annop
Date Issued
February 21, 2018
Type
Article
Abstract
Here, we demonstrate a novel device structure design to enhance the electrical conversion output of a triboelectric device through the piezoelectric effect called as the piezo-induced triboelectric (PIT) device. By utilizing the piezopotential of ZnO nanowires embedded into the polydimethylsiloxane (PDMS) layer attached on the top electrode of the conventional triboelectric device (Au/PDMS-Al), the PIT device exhibits an output power density of 50 μW/cm2, which is larger than that of the conventional triboelectric device by up to 100 folds under the external applied force of 8.5 N. We found that the effect of the external piezopotential on the top Au electrode of the triboelectric device not only enhances the electron transfer from the Al electrode to PDMS but also boosts the internal built-in potential of the triboelectric device through an external electric field of the piezoelectric layer. Furthermore, 100 light-emitting diodes (LEDs) could be lighted up via the PIT device, whereas the conventional device could illuminate less than 20 LED bulbs. Thus, our results highlight that the enhancement of the triboelectric output can be achieved by using a PIT device structure, which enables us to develop hybrid nanogenerators for various self-power electronics such as wearable and mobile devices.
Citation
ACS Applied Materials and Interfaces, 10(7), 6433-6440, 2018