In vitro measurement of myocardial impedivity anisotropy with a miniature rectangular tube

dc.contributor.authorTsai, Jang Zern
dc.contributor.authorWill, James A.
dc.contributor.authorVorperian, Vicken R.
dc.contributor.authorHubbard-Van Stelle, Scott
dc.contributor.authorCao, Hong
dc.contributor.authorTungjitkusolmun, Supan
dc.contributor.authorChoy, Young Bin
dc.contributor.authorWebster, John G.
dc.date.accessioned2026-08-06T09:52:04Z
dc.date.available2026-08-06T09:52:04Z
dc.date.issued2003-04-01
dc.description.abstractDue to rapid change of fiber orientation, it is difficult to measure myocardial impedivity separately in a longitudinal or transverse fiber direction without mutual influence in the two directions. Previously published values of the longitudinal and the transverse myocardial impedivity were derived indirectly from measurements that mixed the impedivity in all directions. Those values are questionable because the derivations were based on a simplified uniform myocardial fiber model. In this paper, a miniature rectangular tube was devised to facilitate direct measurement of myocardial impedivity in a uniform fiber direction. The average transverse-to-longitudinal ratio of the measured in vitro swine myocardial impedivity was about 1.66 from 1 Hz to 1 kHz and dropped to 1.25 at 1 MHz. The result is important for accurate modeling of the electrical property of myocardium in biomedical research of radio-frequency cardiac catheter ablation.
dc.identifier.citationIEEE Transactions on Biomedical Engineering, 50(4), 528-532, 2003
dc.identifier.doi10.1109/TBME.2003.809475
dc.identifier.issn00189294
dc.identifier.other2-s2.0-0037387664
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/696
dc.sourceIEEE Transactions on Biomedical Engineering
dc.subjectAnisotropy
dc.subjectFour-terminal impedivity
dc.subjectMyocardial impedivity
dc.subjectResistivity
dc.titleIn vitro measurement of myocardial impedivity anisotropy with a miniature rectangular tube
dc.typeArticle

Files

Collections