Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs
| dc.contributor.author | Promvonge, Pongjet | |
| dc.contributor.author | Changcharoen, Wayo | |
| dc.contributor.author | Kwankaomeng, Sutapat | |
| dc.contributor.author | Thianpong, Chinaruk | |
| dc.date.accessioned | 2026-08-06T10:03:30Z | |
| dc.date.available | 2026-08-06T10:03:30Z | |
| dc.date.issued | 2011-12-01 | |
| dc.description.abstract | A numerical work has been conducted to examine turbulent periodic flow and heat transfer characteristics in a three dimensional square-duct with inline 60° V-shaped discrete thin ribs placed on two opposite heated walls. The isothermal-flux condition is applied only to the upper and lower duct walls while the two sidewalls are insulated, similar to internal passage cooling of gas turbine blades. The computations are based on the finite volume method with the SIMPLE algorithm for handling the pressure-velocity coupling. Air is the working fluid with the flow rate in terms of Reynolds numbers ranging from 10,000 to 25,000. The numerical result is validated with available square-rib measured data and found to agree well with measurement. The computation reveals that the ribbed duct flow is fully developed periodic flow and heat transfer profiles at about x/ D=7-11 downstream of the inlet. Effects of different rib height to duct diameter ratios, BR, on thermal characteristics for a periodic ribbed duct flow are investigated. It is found that a pair of counter-rotating vortices (P-vortex) caused by the rib can induce impingement/attachment flows on the walls leading to greater increase in heat transfer over the test duct. In addition, the rise of BR values leads to the increase in heat transfer and friction loss. The maximum thermal performance is around 1.8 for the rib with BR=0.0725 where the heat transfer rate is about 4.0 times above the smooth duct at lower Reynolds number. © 2011 Elsevier Ltd. | |
| dc.identifier.citation | International Communications in Heat and Mass Transfer, 38(10), 1392-1399, 2011 | |
| dc.identifier.doi | 10.1016/j.icheatmasstransfer.2011.07.014 | |
| dc.identifier.issn | 07351933 | |
| dc.identifier.other | 2-s2.0-81055157574 | |
| dc.identifier.uri | https://dspace.kmitl.ac.th/handle/123456789/3980 | |
| dc.source | International Communications in Heat and Mass Transfer | |
| dc.subject | Heat transfer | |
| dc.subject | Periodic flow | |
| dc.subject | Square duct | |
| dc.subject | Turbulent flow | |
| dc.subject | V-discrete rib | |
| dc.title | Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs | |
| dc.type | Article |