Low-profile metallic tag antenna for UHF-RFID system

Simple item page
dc.contributor.authorLertsakwimarn, Kittima
dc.contributor.authorPhongcharoenpanich, Chuwong
dc.date.accessioned2026-08-06T10:12:58Z
dc.date.available2026-08-06T10:12:58Z
dc.date.issued2016-01-01
dc.description.abstractA low-profile ultrahigh frequency (UHF) passive radio frequency identification (RFID) tag for the applications to distinguish metallic from non-metallic is presented. The proposed antenna structure consists of T-shaped structure and parasitic parallel longitudinal strip lines which are placed symmetrically. There is an air gap between the head parts of T-shaped structure for installing IC chip. The head part has shorting pin that connects the ground plane. The parametric studies are described. From the results, the tag antenna with defected ground plane has larger difference of maximum read range compared between the tag on metallic plate and the tag in free space. The proposed UHF-RFID tag antenna can adjust the impedance characteristic by changing the length of the middle longitudinal strip. The tag antenna prototype is fabricated with an area of 90 × 20 × 3 mm<sup>3</sup> (0.28λ<inf>0</inf> × 0.06λ<inf>0</inf> × 0.009λ<inf>0</inf>). The measured results of maximum read range on the metallic plate and in free space are 83 and 24 mm, respectively. The simulated and measured results of the proposed RFID tag antenna are discussed.
dc.identifier.citationLecture Notes in Electrical Engineering, 379, 109-117, 2016
dc.identifier.doi10.1007/978-3-319-30117-4_10
dc.identifier.issn18761100
dc.identifier.other2-s2.0-84978221239
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/6630
dc.sourceLecture Notes in Electrical Engineering
dc.subjectLow-profile tag antenna
dc.subjectMetallic tag antenna
dc.subjectUHF-RFID tag antenna
dc.titleLow-profile metallic tag antenna for UHF-RFID system
dc.typeConference Paper

Files

Collections

Research