Fault classification on the hybrid transmission line system between overhead line and underground cable

dc.contributor.authorKlomjit, Jittiphong
dc.contributor.authorNgaopitakkul, Atthapol
dc.date.accessioned2026-08-06T10:17:11Z
dc.date.available2026-08-06T10:17:11Z
dc.date.issued2017-08-30
dc.description.abstractThis paper illustrates fault classification on hybrid transmission line. Current signals were analyzed by coefficients of discrete wavelet transform (DWT). Daubechies4 (db4) is employed as mother wavelet to decompose high frequency components from fault signals. In this paper, ATP/EMTP is used to simulate fault signal from current signals. Hybrid system between overhead line and underground cable of 115 kV from Provincial Electricity Authority (PEA-Thailand) system in case single circuit single conductor with overhead and underground was used as simulation case study. Various factors such as location of fault, fault type and fault angle have been taken into consideration. DWT is then applied on phase current and zero sequence signals using MATLAB software in order to obtain coefficient in scale 1 for further analysis. This value is mainly used to design algorithm for fault classification. Result obtained from the study is satisfactory.
dc.identifier.citationIfsa Scis 2017 Joint 17th World Congress of International Fuzzy Systems Association and 9th International Conference on Soft Computing and Intelligent Systems, 2017
dc.identifier.doi10.1109/IFSA-SCIS.2017.8023263
dc.identifier.other2-s2.0-85030871408
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/7799
dc.sourceIfsa Scis 2017 Joint 17th World Congress of International Fuzzy Systems Association and 9th International Conference on Soft Computing and Intelligent Systems
dc.subjectFault classification
dc.subjectOverhead line
dc.subjectUnderground Cable
dc.subjectWavelet Transform
dc.titleFault classification on the hybrid transmission line system between overhead line and underground cable
dc.typeConference Paper

Files

Collections