Aerothermal performance evaluation of a tube mounted with broken V-ribbed twisted tape: Effect of forward/backward arrangement

Simple item page
dc.contributor.authorChuwattanakul, V.
dc.contributor.authorWongcharee, K.
dc.contributor.authorKetain, P.
dc.contributor.authorChamoli, S.
dc.contributor.authorThianpong, C.
dc.contributor.authorEiamsa-Ard, S.
dc.date.accessioned2026-08-06T10:40:33Z
dc.date.available2026-08-06T10:40:33Z
dc.date.issued2023-01-01
dc.description.abstractAn experimental investigation on the aerothermal performance of a heat exchanger tube equipped with newly designed broken V-ribbed twisted tapes (B-VRT), was carried out. In the present work, the heat transfer intensification by a B-VRT can be attributed to greater mixing caused by two flow characteristics: 1) longitudinal vortices from the ribs and 2) swirling flow from the twisted tape. The B-VRT with rib attack angles (α) of 45°, 60°, 75°, and 90°, were tested using air as the test fluid. The experimental results of the tube with B-VRTs in a forward/backward arrangement were compared to those of a plain tube alone and a tube with typical twisted tapes (TT) for Reynolds numbers between 6,000 and 20,000. The results indicated that the tube with the B-VRT having forward facing ribs with α = 45° gave the best performance with Nusselt number ratio (Nu/Nup) of 2.27, a friction factor (f/fp) of 4.4, and an aerothermal performance factor (APF) of 1.38. For the range investigated, the B-VRT offered up to 31.9% higher Nusselt numbers than TT. The B-VRT with the smallest rib attack angle (α) of 45° offered higher aerothermal performance factors than the ones with rib attack angles (α) of 60°, 75°, and 90° by approximately 6.85%, 12.99%, and 20.2%, respectively. The results of the B-VRT with optimum geometry (α = 45°) were benchmarked against those reported in similar published papers. Evidently, the aerothermal performance factors the B-VRT were superior to those of most of other tube inserts, especially at low Reynolds numbers. Finally, within the range of parameters (α, y/W and Re) taken into consideration in this study, correlations of Nu and f were developed to estimate the heat transfer and pressure drop. The correlations for Nu, f, and APF showed acceptable prediction accuracies, with respective deviations of ±4%, ±5.4%, and ±4%.
dc.identifier.citationCase Studies in Thermal Engineering, 41, 2023
dc.identifier.doi10.1016/j.csite.2022.102642
dc.identifier.issn2214157X
dc.identifier.other2-s2.0-85146431339
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/14170
dc.sourceCase Studies in Thermal Engineering
dc.subjectAerothermal performance factor
dc.subjectBroken V-Ribbed twisted tape
dc.subjectEnhanced heat transfer
dc.subjectTypical twisted tape
dc.titleAerothermal performance evaluation of a tube mounted with broken V-ribbed twisted tape: Effect of forward/backward arrangement
dc.typeArticle

Files

Collections

Research