Analysis and Comparison of Characteristics for Offline PD Measurements in Turbo-Generators at Different Test Time Intervals

Simple item page
dc.contributor.authorDorkmai, K.
dc.contributor.authorPannil, P.
dc.contributor.authorTattiwong, K.
dc.contributor.authorManeerot, S.
dc.contributor.authorSuksawat, D.
dc.contributor.authorPattanadech, N.
dc.date.accessioned2026-08-06T10:34:34Z
dc.date.available2026-08-06T10:34:34Z
dc.date.issued2022-01-01
dc.description.abstractPartial discharge (PD) measurement is widely used for the condition assessment of high voltage equipments. It is a tool to detect the localized discharges occurring in the weakness point sites, which causes deterioration that can lead to failure. Hence, it is essential to diagnose the PD behavior to prevent the consequent failure which maybe takes place. This paper presents an analysis of the offline PD measurements performed on the stator winding insulation system of three turbo-generators which consist of a hydrogen-cooled generator rate of 211.75 MVA, 15.75 kV, and two air-to-water heat-cooled generators which the same rate of 50.8 MVA, 11.5 kV, which were located in the power plant. Firstly, the offline PD measurements of these generators have been energized to the star point side and the high voltage coupling capacitor is installed on the high voltage terminal side, according to IEC 60034-27-1. Additionally, the test voltages were applied to the test object with a step voltage profile. To analyze the PD behaviors of the stator winding insulation, the PD characteristics such as the PD pulses, PD magnitude, and phase-resolved PD (PRPD) patterns were monitored and recorded. Besides, the effect of applied test voltage-time, i.e., 1, 3, and 5 minutes, on such characteristics were reported and compared. Finally, the PD behavior of the stator winding insulation of these generators showed clearly different results for PD measured at different recording times. The highly fluctuating PD magnitude and PD pulse shape at the initial duration of the measurement, and then gradually decreases to convergence to a stable charge magnitude as the test-time increases.
dc.identifier.citation2022 9th International Conference on Condition Monitoring and Diagnosis Cmd 2022, 103-107, 2022
dc.identifier.doi10.23919/CMD54214.2022.9991528
dc.identifier.other2-s2.0-85146556956
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/12560
dc.source2022 9th International Conference on Condition Monitoring and Diagnosis Cmd 2022
dc.subjectDifferent test time
dc.subjectPartial discharge
dc.subjectPD in rotating machine
dc.subjectPD test time interval
dc.subjectTurbo-generators
dc.titleAnalysis and Comparison of Characteristics for Offline PD Measurements in Turbo-Generators at Different Test Time Intervals
dc.typeConference Paper

Files

Collections

Research