Three-Input Single-Output Voltage-Mode Multifunction Filter with Electronic Controllability Based on Single Commercially Available IC

dc.contributor.authorSupachai Klungtong
dc.contributor.authorDusit Thanapatay
dc.contributor.authorWinai Jaikla
dc.date.accessioned2025-07-21T05:57:47Z
dc.date.issued2017-01-01
dc.description.abstractThis paper presents a second-order voltage-mode filter with three inputs and single-output voltage using single commercially available IC, one resistor, and two capacitors. The used commercially available IC, called LT1228, is manufactured by Linear Technology Corporation. The proposed filter is based on parallel RLC circuit. The filter provides five output filter responses, namely, band-pass (BP), band-reject (BR), low-pass (LP), high-pass (HP), and all-pass (AP) functions. The selection of each filter response can be done without the requirement of active and passive component matching condition. Furthermore, the natural frequency and quality factor are electronically controlled. Besides, the nonideal case is also investigated. The output voltage node exhibits low impedance. The experimental results can validate the theoretical analyses.
dc.identifier.doi10.1155/2017/5240751
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/6238
dc.subjectElectronic filter topology
dc.subjectButterworth filter
dc.subjectElectronic filter
dc.subjectVoltage-controlled filter
dc.subjectConstant k filter
dc.subject.classificationAnalog and Mixed-Signal Circuit Design
dc.titleThree-Input Single-Output Voltage-Mode Multifunction Filter with Electronic Controllability Based on Single Commercially Available IC
dc.typeArticle

Files

Collections