DIELECTRIC AND FATIGUE LIFE ENHANCEMENT IN BaTiO3/Epoxy RESIN BASED COMPOSITES USED AS PIEZOELECTRIC NANOGENERATOR

Simple item page
dc.contributor.authorVittayakorn, Wanwilai
dc.contributor.authorRerngroen, Nakulkarn
dc.contributor.authorSasipongpan, Apinya
dc.contributor.authorMuanghlua, Rangson
dc.contributor.authorVittayakorn, Naratip
dc.date.accessioned2026-08-06T10:49:38Z
dc.date.available2026-08-06T10:49:38Z
dc.date.issued2025-01-01
dc.description.abstractThis study investigates the enhancement of dielectric properties and fatigue life in BaTiO3/epoxy resin composites utilized as the active material in piezoelectric nanogenerators. Through a systematic approach, various fabrication techniques and composite formulations are explored to optimize the dielectric constants, energy density, and piezoelectricity while mitigating fatigue-related degradation. The physical character, phase formation, and chemical properties of these composites are identified via the optical camera, XRD, and FTIR methods, respectively. The frequency dependence of dielectric properties for all samples is measured by an LCR meter. The hysteresis P-E loops are investigated in order to calculate the energy density and energy loss density of materials. The piezoelectric properties of these composites are performed by studying the generated output voltage and current after applying mechanical force to the samples. Moreover, MWCNT nanomaterials have also been incorporated into these composites in order to improve their dielectric value and fatigue life. The results show that the dielectric constant (εr) and dielectric loss (tanδ) of these composites are independent of frequency. After loading BaTiO3 into the epoxy resin matrix, the εr and tanδ significantly increased with the increasing BaTiO3 amount. The energy density and energy loss density of all composites were calculated from these P-E loops, and it is seen that pure epoxy resin shows the lowest energy density and energy loss density values. After loading BaTiO3 into the epoxy resin matrix, both the energy density and the energy loss density of the composites significantly increased. Moreover, after adding 20 percent by volume of BaTiO3 to the system, the energy density increases by 160% compared with pure epoxy resin. For the effect of MWCNT filler, it is seen that the εr, tanδ, energy density and energy loss density are significantly improved after adding 1.5 vol% of MWCNT into the system. The output current generated by applying mechanical force to the sample increased 27 times after adding MWCNT to the BT-filled epoxy resin composite. Finally, it can be concluded that all experimental results demonstrate significant enhancements in dielectric properties, energy density and electric output current, paving the way for the development of robust and efficient piezoelectric nanogenerators for diverse energy harvesting applications.
dc.identifier.citationSuranaree Journal of Science and Technology, 32(3), 30306-30306-8, 2025
dc.identifier.doi10.55766/sujst10702
dc.identifier.issn0858849X
dc.identifier.other2-s2.0-105011718234
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/16571
dc.sourceSuranaree Journal of Science and Technology
dc.subjectBarium Titanate
dc.subjectComposites
dc.subjectEpoxy Resin
dc.subjectMWCNT
dc.subjectPiezoelectric Nanogenerato
dc.titleDIELECTRIC AND FATIGUE LIFE ENHANCEMENT IN BaTiO3/Epoxy RESIN BASED COMPOSITES USED AS PIEZOELECTRIC NANOGENERATOR
dc.typeArticle

Files

Collections

Research