Evaluation of RFID Propagation Channels with Wooden and Metal Bookshelves Based on Measurement Data

Simple item page
dc.contributor.authorSupramongkonset, Jatuporn
dc.contributor.authorRattasuwan, Kotchakorn
dc.contributor.authorPromwong, Sathaporn
dc.date.accessioned2026-08-06T10:39:48Z
dc.date.available2026-08-06T10:39:48Z
dc.date.issued2023-01-01
dc.description.abstractThis paper studies the propagation that occurs in Radio Frequency Identification (RFID). The purpose of this study is to establish a model to study the energy and efficiency of the system. Experimenting with two model of bookshelf models. Wood and metal bookshelves are used as models to measure data. Microstrip antenna are used as a transmitter (Tx antenna) and a receiver (Rx antenna) at frequency of 2.45 GHz channels in co-polarization. From the data of this measurement result, we can observe the tendency of path loss arising from the change in distance and the effect of the signal in both wood and metal bookshelf by the contouring of the path loss signal. The results showed that the co-polarization had higher path loss at increased distances. By path loss modeling using contour method it was found that at measuring point near the edge of the bookshelf There is path loss in the edge of metal bookshelf higher than the edges of wooden bookshelf.
dc.identifier.citation2023 9th International Conference on Engineering Applied Sciences and Technology Iceast 2023 Proceeding, 67-70, 2023
dc.identifier.doi10.1109/ICEAST58324.2023.10157612
dc.identifier.other2-s2.0-85165624678
dc.identifier.urihttps://dspace.kmitl.ac.th/handle/123456789/13968
dc.source2023 9th International Conference on Engineering Applied Sciences and Technology Iceast 2023 Proceeding
dc.subjectchannel measurement
dc.subjectpath loss
dc.subjectRFID
dc.subjectRFID measurement
dc.subjectRFID propagation loss
dc.titleEvaluation of RFID Propagation Channels with Wooden and Metal Bookshelves Based on Measurement Data
dc.typeConference Paper

Files

Collections

Research